PM10 (Air Sampling) Equipment Available In Equatorial Guinea
-
PremiumManufactured by OPSIS ABbased in SWEDEN
The PM10 monitor version of OPSIS’ SM200 particulate monitor provides accurate and reliable automatic measurements of PM10 particulate fraction concentrations in ambient air, as well as sampling of the PM10 particulate fraction for subsequent manual ...
-
Manufactured by AirMetricsbased in USA
The MiniVol TAS can be configured to sample for PM10 at a flow rate of 5L/min. The sampling procedures for PM10 are listed ...
-
Manufactured by Westech Scientific Instruments (Westech)based in UNITED KINGDOM
Mass Flow Controlled PM10 System. Includes size selective inlet (10 micron cut size), anodized aluminium shelter, 8' x 10' stainless steel filter holder with probe hole, blower motor assembly, continuous flow/pressure recorder, combination mass flow controller w/20-60 SCFM air flow probe, time indicator, 30' water manometer, filter media ...
-
Manufactured by Tisch Environmental Incbased in USA
Includes size selective inlet (<10 micron cut size), anodized aluminum shelter, 8' x 10' stainless steel filter holder with stagnation pressure tap, blower motor assembly, continuous flow/pressure recorder, elapsed time indicator, 30' water manometer, filter media holder/filter paper cartridge, ( 8 x 10), volumetric flow controller with look up table, 7 day mechanical ...
-
Manufactured by Thermo Scientific - Air Quality Instrumentsbased in USA
The manual dichotomous sampler is used for routine compliance montoring for PM10 and PM2.5. The Dichotomous sampler operates at a flow rate of 1 CHM (16.7 LPM) and is available with built-in mechanical 6-day or 7-day times, or an electronic digital programmable ...
-
Manufactured by Tisch Environmental Incbased in USA
Includes size selective inlet (<10 micron cut size), anodized aluminum shelter, 8' x 10' stainless steel filter holder with stagnation pressure tap, blower motor assembly, continuous flow/pressure recorder, solid state digital timer programmer with digital elapsed time indicator, 30' water manometer, volumetric flow controller with look up ...
-
Manufactured by Tisch Environmental Incbased in USA
Mass Flow Controlled PM10 System. Includes size selective inlet (<10 micron cut size), anodized aluminum shelter, 8' x 10' stainless steel filter holder with probe hole, blower motor assembly, continuous flow/pressure recorder, combination mass flow controller w/20-60 SCFM air flow probe, time indicator, 30' water manometer, filter media ...
-
Manufactured by Tisch Environmental Incbased in USA
PM-10 High Volume Monitor: Complete with Size selective inlet, outdoor anodized aluminum shelter, aluminum blower motor assembly, 8' x 10' stainless steel filter holder, mass flow controller with 20/60 scfm flow probe,7-day mechanical timer, elapsed time indicator, continuous flow/pressure recorder, and filter media holder/filter paper cartridge (110v/60hz or ...
-
Manufactured by Environmental Solutionsbased in INDIA
This sampler technology is developed, patented & tested by CSIR-National Physical Laboratory, New ...
-
Manufactured by AMS Analiticabased in ITALY
The system is based on simultaneous sampling in the same flow line of PM10 particulate (or in alternative PM2.5) with as well support for the sampling of PAH by way of vial adsorption in purified polyurethane foam (PUF). As an alternative to this latter a vial containing multiple layers of PUF and XAD-2 may be ...
-
Manufactured by AMS Analiticabased in ITALY
PM10-2,5 sampling adding the Wins impactor. The PM10 and PM2,5 US EPA sampling inlet is a part of a new field portable sampling system combined with a constant flow rate AirCube Sampler. The PM inlet are manufactured in fully compliance with US EPA requirements available in the reference method. Fully manufactured in anodized aluminum for ...
-
Manufactured by AMS Analiticabased in ITALY
The sampling sequential system is the reply to continuous requests for an easier to use tool without any locating and installation issue. The system concerns a derivate in anodized aluminum reducing dust passage friction to the minimum guarantying maximum sampling ...
-
Manufactured by AMS Analiticabased in ITALY
A). These PM10 and PM2,5 impactors obtained the certification of compliance with TUV Rheinland ...
-
Manufactured by Tisch Environmental Incbased in USA
Volumetric Flow Controlled Total Suspended Particulate TSP High Volume Air Sampling System. Includes anodized aluminum shelter, 8' x 10' stainless steel filter holder with stagnation pressure tap, blower motor assembly, continuous/flow pressure recorder, elapsed time indicator, 30' manometer, volumetric flow controller with look up table,7 day timer. 110v/60 hz or 220 ...
-
Manufactured by Tisch Environmental Incbased in USA
Mass Flow Controlled Total Suspended Particulate TSP High Volume Air Sampling System. Includes anodized aluminum shelter, 8" x 10" stainless steel filter holder with probe hole, aluminum blower motor assembly, continuous/flow pressure recorder, elapsed time indicator, mass flow controller w/20-60 SCFM air flow probe, and 7-day mechanical ...
-
Manufactured by Tisch Environmental Incbased in USA
The Hi-Vol PM 2.5 ambient air sampler is designed to provide owners of our TE-6001 PM-10 samplers with the option of retrofitiing existing equipment rather than procure a new family of apparatus. An adapter is placed into the model TE-6001 sampler in lieu of the existing PM 2.5 fractonator. The adapter has a new plate that contains multiple impactors, which collect particles larger than PM 2.5 ...
-
Manufactured by Tisch Environmental Incbased in USA
The series TE-230 provides a simple, accurate, and yet low-cost means of obtaining the particle size distribution and respirable mass fraction of suspended particulates in outdoor and occupational environments. The unique slotted impactor design features the ultimate in precision, predictability, and sharpness of cut-off, combined with compactness, ease-of-use, and the lowest internal ...
-
Manufactured by Tisch Environmental Incbased in USA
TSP Tri-pod High Volume Air sampler: Complete with outdoor anodized aluminum tri-pod shelter, aluminum blower motor assembly, 8' x 10' stainless steel filter holder, 30' slack tube manometer, and motor speed voltage control/elapsed time indicator (110v/60hz or ...
-
Manufactured by Tisch Environmental Incbased in USA
Mass Flow Controlled Total Suspended Particulate High Volume Air Sampling System Includes: Anodized aluminum shelter, 8' x 10' stainless steel filter holder with probe hole, aluminum blower motor assembly, continuous flow/pressure recorder, combination mass flow controller w/20-60 SCFM air flow probe and digital timer with digital elapsed time indicator (110V/50hz ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
. The mass concentration of PM-10’s is determined by dividing the particulate mass by the volume of air sampled. The “PM10-INLET” is adaptable to all of HI-Q’s HVP-Series ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you