Sequential Air Sampling equipment (Air Sampling) | Air and Climate

Premium

Teledyne Isco - Model 3700 - Full-Size Portable Water Sampler

The full-featured 3700 Sampler collects sequential or composite samples based on time, flow rate, or storm conditions. It's a great choice if you don't need the sophisticated parameter monitoring and logging capabilities of our 6700 Series. The exclusive LD90 gives you automatic compensation for changes in head height, plus automatic suction ...

By Teledyne Isco based in Lincoln, NEBRASKA (USA). from Water and Wastewater - Sequential Portable Samplers Product line

Premium

Environnement S.A. - Model PM162M - Automatic Sequential Particulate Sampler (TSP / PM10 / PM2.5 / PM1)

PM162M is a sequential automatic sampling device for particulate matter in the ambient air. The particles are sampled at constant flow rate (1 m3/h or 2.3 m3/h) and collected on filters for gravimetric weighing and possible physicochemical laboratory analysis. Complies with EN 12341.

By Environnement S.A based in Poissy, FRANCE. from Air Quality Monitoring - Particulates Samplers and Analyzers Product line

Aquaria - Model CF20 SQ - Sequential Sampler

The sampler CF20 SQ offers the possibility to carry out a sequential sampling on 16 channels, each of which programmable indifferently in low or high flows. This possibility allows the operator to sample dust and gas in a single cycle.

By Aquaria based in Lacchirarella, ITALY. from ACTIVE - Outdoor Samplers Product line

MICRODUST - Model PM10 - Sequential Sampler

Both the European Union (EU, 1996) that the Ministry of Environment (DM 25/11/94), have highlighted the importance of continuous monitoring of exposure to physical finer aerosol or with an aerodynamic diameter less than 10 ìm (thoracic fraction or PM 10). These particles are indeed responsible for significant adverse health effects ...

By Aquaria based in Lacchirarella, ITALY. from ACTIVE - Outdoor Samplers Product line

Silent - Sequential Air Sampler

SILENT Sequential Air Sampler is a sequential instrument specifically developed for particulate matter collection in indoor environment.

By FAI Instruments based in Fonte Nouva, ITALY.

Air IDEAL - Detection of Viable Organisms

air IDEAL 3P is for the detection of viable organisms through active air sampling. It uses standard prepared media, such as contact plates or 100mm plates.

By AES CHEMUNEX based in Bruz, Cedex, FRANCE.

AirChek - Model 2000 - -Programmable Personal Sample Pump

The AirChek® 2000, 5 to 3250 ml/min, PC-programmable personal sample pump provides over 12-hour run times for sampling particulates and gases/vapors. The pump is ideal for use with sorbent tubes, filter cassettes, and size-selective samplers. UL Listed for intrinsic safety

By SKC Inc. based in Eighty Four, PENNSYLVANIA (USA). from Sampling Pumps Product line

Model PNS 16-3.1 and PNS 16-6.1 - Sampling Systems

Automatic sequential sampling systems for sampling PM10 (acc. to CEN12341), PM2.5 (acc. to CEN14907) and PM1 particulates. The dust collection system comprises a low-volume sampler unit (LVS) and a filter changer with an intake tube and sampling head (inlet) to collect particulate matter from outdoor air. It functions as per CEN 12341 (PM10) and ...

By Comde-Derenda GmbH based in Stahnsdorf, GERMANY. from Dust Sampling Devices Product line

Comde Derenda - Model PNS T - Automatic Sampling System

Automatic sampling system for continuously monitoring particulate matter (PM10, PM2.5 or PM1) without manual filter changes. The PNS T combines a low / medium volume sampler (LVS or MVS) and a filter changer in a stainless steel cabinet. It collects fine particulate matter on sampling filters according to EN 12341:2014 (PM10 and PM2.5). For this ...

By Comde-Derenda GmbH based in Stahnsdorf, GERMANY. from Environmental Monitoring - SPM Sampling Product line

Skypost - Model PM FG - Ambient Air Particle Samplers

According to EN12341:2014 norm. The sequential substitution system of the filtering membrane with 16 membranes capacity and the electronic flow rate controller, allow continuous, unattended operations as well as an easy replacement of the exposed filters without interrupting the sampling.

By Tecora, a division of Omnisense Technologies based in Fontenay sous Bois Cedex, FRANCE. from Environment, Hygiene & Health - Ambient Air Product line

Thermo Fisher Scientific - Model Partisol™ 2300 - Speciation Sampler

Characterize particles and gases contained in ambient air with Thermo Scientific™ Partisol™ 2300 Speciation Sampler. This flexible sampling platform contains the same user interface and is built upon the same hardware platform as the popular Partisol Model 2025 Sequential Air Sampler and allows two size fractions to be sampled ...

By Thermo Scientific - LC/MS GC GC/MS based in MASSACHUSETTS (USA). from Air Quality and Water Analysis Product line

Premium

Cerex - Model UV 3000 C - Fixed Mount Multi-Gas Analyzer System

The Cerex UV 3000C is a fixed mount multi-gas analyzer with internal sample cell. Available with an integrated twelve port multiplexer, the UV 3000C offers sequential zone monitoring of up to ten locations for leak detection, process monitoring or indoor air quality monitoring. Two ports are generally reserved for operator specified quality ...

By Cerex Monitoring Solutions, LLC. based in Atlanta, GEORGIA (US) (USA). from Fixed Mount Point Analyzers Product line

Allergenco - Model MK3 - Basic Package Sampler

Allergenco MK-3 is a versatile, portable, and ideal sampler for collection of single or sequential indoor air quality samples.

By Environmental Monitoring Systems, Inc.(ems) based in North Charleston, SOUTH CAROLINA (USA). from Cassettes & Supplies- Mold-IAQ- Impactors Product line

MICROFLOW - Model alfa - Microbiological Air Sampler

MICROFLOW alfa has been developed for bio-aerosol sampling in critical places (e.g. clean rooms, food plants, fermentation’s plants etc….). Microflow alfa allows to verify and quantify microorganism presence. In this way you can value the exposure or you can identify the source in order to put in place corrective actions.

By Aquaria based in Lacchirarella, ITALY. from ACTIVE - Indoor - Environmental Sampler Product line

Eco Physics - Model CLD 88 p - Single Reaction Chamber Analyzers

The CLD 88 p nitrogen oxide analyzer is unique in its precision. It allows with the PLC 860 the sequential measurement of NO and NO2 concentrations even in the range of parts per trillion!

By ECO PHYSICS INC. based in Ann Arbor, MICHIGAN (USA). from Atmospheric Research Product line

Model GAS-60 - Gas Analyzer

The GAS-60 Gas Analyzer measures online both free air and dissolved gas by a sequential sampling and analysis technique. Paper, board and tissue making processes have become a lot more foamy due to excessive air mixed in from recycled furnishes, high turbulence operations and dissolved carbon dioxide gas released from calcium carbonate, commonly ...

By BTG Instruments GmbH based in Eclépens, SWITZERLAND. from Inline Instrumentation Product line

Whatman - QM-A Quartz microfiber filters

High-purity quartz (SiO2) microfiber filters are used for air sampling in acidic gases, stacks, flues and aerosols, particularly at high temperatures up to 500° C and in PM-10 testing. Because of the low level of alkaline earth metals, 'artifact' products of sulfates and nitrates (from SO2 and NO2) are virtually eliminated. QM-A, sequentially ...

By GE Healthcare UK Limited based in Little Chalfont, UNITED KINGDOM. from Quartz fiber filters Product line

Model PBL - Mixing Monitor

In order to understand the pollutants accumulation and, in general the temporal evolution of all air pollution processes, it is necessary to know the low atmosphere layers dilution properties. To get information about the Planetary Boundary Layer dilution potential you need to monitor a chemically stable compound (Radon) with an emission flow that ...

By FAI Instruments based in Fonte Nouva, ITALY.

Subscribe to our eBulletins

Add Supplier Profile