stack sampling Equipment available in Liberia

Available in Liberia| Near Liberia
51 Results found

We couldn't find any stack sampling equipment in Liberia

Here is a list of results available in Liberia

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Air & Climate ×

  • Subcategory: Air Sampling ×

  • Keyword: stack sampling ×

  • Available in: Africa ×

  • Available in: Liberia ×

HI-Q - Stack Sampling System Design

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

HI-Q is ready to help with your stack sampling requirements: State and Federal nuclear regulatory agencies require a stack discharge sampling program as part of the licensing process. Radionuclides discharged to the air in the form of particulate and volatile compounds must be assayed. Therefore, nuclear facilities are required to follow standard ...

Environnement S.A. - Model HOFI PROBE - Hot Extractive Stack Gas Sampling System

by Environnement S.A     based in Poissy, FRANCE

Hot extractive Stack gas sampling system. Gas sampling system to be connected to heated analyzers( e.g. MIR FT ).

HI-Q - Gas Sampling & ISO-Kinetic Sampling Probes

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

HI-Q Environmental Products Company's product line includes complete stack sampling systems, consisting of a specified type of probe, in-line filter holder, the transport line, sampling pump and flow controller. We recommend, design, and supply complete systems. HI-Q Environmental Products Company is able to make stack-sampling systems design ...

Westech - Model MST - Manual Stack Sampling Train

by Westech Scientific Instruments (Westech)     based in Upper Stondon, UNITED KINGDOM

Westech Scientific Instruments (Westech) provides a complete range of Manual Stack Trains for isokinetic and gas sampling of emissions to determine all major emitted pollutants. The standard equipment is modified to meet all current European legislation and requirements and will still comply with existing USEPA methods. A complete range of ...

EPA Method - Model 16a - Basic Stack Sampling System

by Keika Ventures, LLC (KV)     based in Chapel Hill, NORTH CAROLINA (USA)

Method 16a - Determination of Total Reduced Sulfur Emissions from Stationary Sources. This manual method has been replaced by more automated systems in the U.S., but is still frequently requested from samplers outside the U.S. so we have decided to provide a listing of the component pieces needed for this system.

HI-Q - Dry Gas Totaling Meters

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

HI-Q offers a wide range of dry gas totaling meters which, when incorporated in an air sampling system, are an excellent source for recording the total volume of air sampled. The gas-totaling meter may either be connected to have gas supplied through the inlet (connected to the exhaust of a positive displacement pump) or drawn through the outlet ...

CMC SmartCEMS - Model SCSL - Sample Line of PEMS

by CMC Solutions, LLC     based in Farmington Hills, MICHIGAN (USA)

The SmartCEMS Sample Line is a component of a predictive emission monitoring system (PEMS) that provides for continuous stack gas sampling for pollutants and diluents under U.S. EPA 40 CFR Part 60 and/or U.S. EPA 40 CFR Part 75 regulations. The Sample Line will meet the requirements for sampling during model development and PEMS QA activity. The ...

Scentroid - Model DS5 - Stack Diluting Sampler

by Scentroid, a Division of IDES Canada.     based in Markham, ONTARIO (CANADA)

Stack sampler is an easy to use device that provides accurate pre-dilution of high temperature gas emissions with nitrogen or zero-air to minimize condensation inside the sample bag. Dilution is achieved inside the heated probe and can be controlled from 1:3 to 1:305 in 13 steps.

PACE - Model 1410 - Heated Stack Filter Box

by PACE Environmental Products, Inc.     based in Whitehall, PENNSYLVANIA (USA)

The PACE Heated Stack Filter Box is constructed of 316 Stainless Steel and designed to be mounted in an outdoor environment on an emissions stack. A stainless steel probe extending halfway into the stack is connected to a 3' 150 lb. 304 Stainless Steel flange, drilled and tapped to accept a 3/4' npt fitting. On the opposite side of the flange is a ...

J.U.M. - Model 2812D - Compact Sample Pump

by J.U.M. Engineering GmbH     based in Karlsfeld, GERMANY

The J.U.M. Engineering 2812D is a very compact sample pump. The 2812D is made of 316 Stainless Steel to withstand normal corrosive gasses as they are present in standard stack gas emission. The drive mechanism is designed for a very smooth, low vibration, silent and continuous operation .

J.U.M. - Model 2825PD - Compact Compressor or Sample Pump

by J.U.M. Engineering GmbH     based in Karlsfeld, GERMANY

The J.U.M. Engineering 2825PD is a very compact compressor or sample pump. The 2825PD is made of 316 Stainless Steel with aluminum heads as a compressor or it is made from all stainless steel to be used as a dual or high flow sample pump. In the all stainless version it withstands normal corrosive gasses as they are present in standard stack gas ...

Test Ports

by L&E America     based in Kaukauna, WISCONSIN (USA)

Test ports for measuring flowrates, measuring pressures, and sampling during oxidizer compliance testing are installed on all TANN regenerative thermal oxidizers or other oxidizer design. TANN locates outlet test ports on exhaust stacks and usually fabricates inlet test ports on oxidizer inlet ductwork. This permits sampling and measurements ...

J.U.M. - Model 2812D-HT - Compact, High Temperature Sample Pump

by J.U.M. Engineering GmbH     based in Karlsfeld, GERMANY

The 2812D-HT is a very compact, High Temperature Sample Pump. All parts which come in contact with sample are made of 316 stainless steel to withstand corrosive gasses as they can become present in standard stack gas emission. The drive mechanism has been designed for a very smooth, low vibration, continuous and silent operation. The pump heads ...

Simple Mini-Stack-Probe

by Paul Gothe GmbH     based in Bochum, GERMANY

Probe for the use in small scale furnace stacks. System consist of one bent with bent radius 25 mm. Length of the bent as agreed. Entry thread M 12 x 1 mm for mini nozzles (Material: Stainless Steel). Complete with self regulating electrical heater for filter devices, high performance heater cartridge ca. 220 W, 230V, (default settings: 70°C, ...

Horiba - Model VA 3000 & VS 3000 Series - Stack Gas Analysers


The HORIBA VA VS SERIES is a compact multi-component gas analyser and Sample Gas Conditioning System that provides true versatility in environmental monitoring.

Stationary Monitoring Systems

by PCF Elettronica S.r.l.     based in Levate (BG), ITALY

Modular turnkey automatic industrial systems for sampling, conditioning and monitoring industrial stack/ducts. All the integrated analyzers are EPA and TUV certified.

Model 110 H - Stack Monitoring Analyzer

by PCF Elettronica S.r.l.     based in Levate (BG), ITALY

PCF's Mod. 110H monitor has been designed, developed and built according to new EN 113526 - EN 12619 European directives for continuous detection of VOC, THC and CH4 fractions at emissions. The sample is extracted though a variable length probe carrying a ceramic filter (3 u.m porosity) on the top, a heat traced PTFE tube at 150^-200°C and a ...

LEAP - Model HTC-xt PAL - Prep and Load LC System

by LEAP Technologies, Inc.     based in Carrboro, NORTH CAROLINA (USA)

HTC PAL Prep and Load LC System for High Throughput LC Systems, without tray holders or stacks*

PACE - Model 10341 - Heated Sample Line

by PACE Environmental Products, Inc.     based in Whitehall, PENNSYLVANIA (USA)

Used to transport the continuous sample drawn from the stack to the CEMS Analyzers. The heated sample line is electrically heat traced and insulated to maintain a sample stream temperature above the dew point. Temperature rating of 350°F at 55°F ambient is typical. Temperature controller is required (call PACE for quote on controller). ...

Zambelli - Handheld Isospeed Device

by Zambelli S.r.l.     based in di Milano, ITALY

The handheld isospeed device can be used to measure the thermodynamic parameters of a stack exhaust or duct and will save the details to the internal “duct library” for future reference.  The isospeed sensors measure differential pressure (0-25 bar), static pressure (0-5 psi), barometric pressure (0-15 psi) and ...

Need help finding the right suppliers?

Let the XPRTs do the work for you