Surface Sampling (Air Sampling) Equipment
-
Manufactured by Zefon International - Antylia Scientificbased in USA
Sample collection simplified! All that is needed is a household vacuum cleaner with hose attachment. This unique dust collector fits directly onto the end of the vacuum hose. When you vacuum carpets and bare floors, the nozzle collects dust into its internal filter chamber. When finished, remove the collection nozzle, replug, and send the ...
-
Manufactured by Zefon International - Antylia Scientificbased in USA
Sterile surface swabs are an easy way to sample suspect areas for mold contamination. Simply swab the suspect area and submit to a laboratory where the sample will be cultured and the type of mold identified. Each swab comes in an easy to use container for sampling, transport and ...
-
Manufactured by Zefon International - Antylia Scientificbased in USA
Zefon Micro-Vac cassettes are designed for the collection of fibers and particulate from carpets and other dusty areas. They are specially designed with an inlet port angled at 45 degrees and come preloaded with .45µ ...
-
Manufactured by Zefon International - Antylia Scientificbased in USA
Bio-Tape™ provides a standardized sampling method for the determination of mold, microbial, bioaerosol, and inorganic dust contamination. It provides the ability to quickly take a sample and measure the relative degree of contamination. It is especially useful when sampling valuable or non-transportable materials and is very ...
-
Manufactured by Zefon International - Antylia Scientificbased in USA
Zefon Micro-Vac cassettes are designed for the collection of fibers and particulate from carpets and other dusty areas. They are specially designed with an inlet port angled at 45 degrees and come preloaded with .45µ ...
-
Manufactured by Zefon International - Antylia Scientificbased in USA
Zefon offers a complete line of preloaded air sampling filter cassettes manufactured to meet all applicable NIOSH, OSHA, and EPA standards. All cassette housings are manufactured in-house from polystyrene, polypropylene, or conductive materials and are available in two, three, or four piece configurations. Cassettes are individually ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
Tekran and VE Technology have partnered together to improve the quality of Natural Gas sampling and analysis. Proper sample collection requires precision equipment to assure mercury is quantitatively transported between the source pipeline and the sample collection device. The Tekran 2642 Natural Gas Sampler paired with a Tekran 2600-NG ...
-
Manufactured by Suzhou Cangjia Super Clean Technology Co., Ltd.based in CHINA
Cleanroom and ESD-safe swabs are for precision cleaning, surface sampling, validation procedures, and the application of lubricants or other liquids within cleanroom and other critical contamination control ...
-
Manufactured by Suzhou Cangjia Super Clean Technology Co., Ltd.based in CHINA
Cleanroom and ESD-safe swabs are for precision cleaning, surface sampling, validation procedures, and the application of lubricants or other liquids within cleanroom and other critical contamination control ...
-
Manufactured by Suzhou Cangjia Super Clean Technology Co., Ltd.based in CHINA
Cleanroom and ESD-safe swabs are for precision cleaning, surface sampling, validation procedures, and the application of lubricants or other liquids within cleanroom and other critical contamination control ...
-
Manufactured by Suzhou Cangjia Super Clean Technology Co., Ltd.based in CHINA
Cleanroom and ESD-safe swabs are for precision cleaning, surface sampling, validation procedures, and the application of lubricants or other liquids within cleanroom and other critical contamination control ...
-
based in UNITED KINGDOM
DART® stands for Direct Analysis in Real Time. It is a new ionization for rapid, non-contact surface sampling of compounds. Operating at ambient pressure with the sample at ground potential, the source enables near instantaneous determination of sample composition by using mass spectrometry. Electronic or vibronic ...
-
Manufactured by Fast Mold Removalbased in USA
scrubbers and HEPA vacuums. Used before, during and after your project, Particulate Conqueror is an inexpensive way to reduce potential cross-contamination, enhance source removal efforts and improve air- and surface-sampling results. ...
-
Manufactured by Physical Electronics, Inc. (PHI)based in USA
The PHI 710 Scanning Auger Nanoprobe is a unique, high performance Auger Electron Spectroscopy (AES) instrument that provides elemental and chemical state information from sample surfaces and nano-scale features, thin films, and interfaces. Designed as a high performance Auger, the PHI 710 provides the superior Auger imaging performance, ...
-
Manufactured by Fluidion SASbased in FRANCE
, and it communicates with the platform via a waterproof cable (RS-232). A first for autonomous underwater vehicles: returning in-situ samples to surface allows for subsequent lab analysis (complete fingerprinting of hydrocarbon traces, full ocean chemistry and biology) and verification of inline sensor ...
-
based in USA
and below the microtiter plate. Optimum evaporation is achieved by the right combination of flow rate and air temperature. A third factor is the position of the needles relative to the sample surface. The lower platform can be adjusted to any height relative to the upper assembly. This means that for every microtiter plate size and sample ...
-
based in UNITED KINGDOM
Diffusion caps are used to define the air gap between the sampling environment and sorbent surface during diffusive sampling (also known as axial or passive sampling). Used in combination with a single-bed sorbent tube, penclip and aluminium long-term storage cap (at the other end of the tube), diffusion caps offer a simple to ...
-
Manufactured by Acoem Australasiabased in AUSTRALIA
The ECOTECH Air Sampling System is designed to meet International Standards (including US EPA Quality Assurance Standards) for the continuous sampling of ambient air. Its robust design is suitable for most ambient air gas sampling applications, and all surfaces in contact with the sample air are made with glass ...
-
Manufactured by Microbia Environnementbased in FRANCE
SOFiA is a handy peristaltic pump coupled with a filtration system for fast and standardized sampling of surface water. The device is lightweight, portable, rugged, easy to use, water-resistant and requires minimal maintenance. Coming with a 2.5h-autonomy battery and a carrying case, it is usable for field work in a wide range of ...
-
Manufactured by Wonder Makers Environmentalbased in USA
Easy to use air sampler for mold spores, particulates, and pollen. Includes: High volume vacuum pump, two 25'lengths of plastic tubing, 110-volt cord, on/off switch, rugged carrying ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you