Air Sampling Equipment For Air And Climate In Latin America
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The BioCapt Microbial Impactor enables the capture of microbiologically viable particulates on a suitable media surface for later incubation and enumeration. With precision-cut slits to ensure laminar flow, the BioCapt Viable Microbial Impactor maximizes collection efficiencies for viable particles in accordance with ISO 14698-1. The 25 L/min flow rate ensures sample volume is collected slowly ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Advanced Energy's Innova 1314i is a highly accurate, reliable, and stable quantitative gas monitor. Its measurement principle is based on the photoacoustic detection method. Extremely versatile by design, the 1314i can measure at trace levels almost any gas that absorbs infrared light. Multi-gas monitoring of up to five different gases (+ water vapor) can be measured with excellent sensitivity ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The Professional IC Vario system with Metrohm's intelligent inline sample preconcentration, sequential suppression, and conductivity detection enables fully automatic determination of anions or cations in solutions with low ion ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The BioCapt® Single-Use Microbial Impactor helps minimize false positives for microbial activity in pharmaceutical cleanrooms by reducing contamination from handling of agar plates. This results in a decrease in investigations while increasing productivity. Additionally, many costly and time consuming sterilization steps, such as autoclaving, disinfecting, handling and logistics are ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
Apex Instruments stocks a variety of fiber thimbles for in-stack particulate sampling. The thimbles are seamless, high purity filters, and available in two different fiber types: borosilicate glass and quartz. Borosilicate glass fiber thimbles are acid-washed to reduce the trace metal content to an absolute minimum. The quartz fiber thimbles are strengthened with alumina and are pre-fired at ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran Series 2600 system allows the analysis of ultra-trace levels of total mercury in laboratory prepared environmental samples (water, biota, soil, sediments, gas cartridges, effluents and more). It offers unparalleled sensitivity and flexibility for those who require truly sensitive total mercury analysis. The Series 2600 is capable of providing a fully automated implementation of EPA ...
-
PremiumManufactured by General Oceanics Inc.based in USA
Union Elbow Grab Seal Connector FURON IMP12UE ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
When remote and flexible monitoring with no fixed sampling point is needed, the Remote Sampling Isokinetic Sampling Probe (ISP) Kit a I lows for samples to be taken while maintaining the integrity of the measurement. The ISP Kit uses a length of sample tubing to connect the sample point to the impaction plate, and is ideal for minienvironment sampling applications such as RABS, Laminar Flow ...
-
PremiumManufactured by AMS, Inc.based in USA
For those seeking to boost field productivity without hiring extra staff, the AFS is the perfect solution. The AFS will retrieve a 7/8 in. diameter soil core from 0 to 12 in. deep. It is important to keep in mind that present soil conditions may affect attainable sampling ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
Tekran and VE Technology have partnered together to improve the quality of Natural Gas sampling and analysis. Proper sample collection requires precision equipment to assure mercury is quantitatively transported between the source pipeline and the sample collection device. The Tekran 2642 Natural Gas Sampler paired with a Tekran 2600-NG provides a complete sampling and analysis ...
-
PremiumManufactured by General Oceanics Inc.based in USA
Straight Union Panel , Grab Seal Connector IMP12SU , 3/4' ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The MerPAS Passive Air Sampler is the newest Tekran sampling solution developed to provide our customers a simple device for measuring mercury in a wide range of environments. The sampler can be configured to sample either background ambient air or highly-contaminated industrial locations. Since collection is passive, MerPAS sampling is completely power-free allowing easy deployment in a wide ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
Ambient air quality is critical for our health and the environment. MARGA is a fully autonomous sampling and measurement system that continuously measures the water-soluble gas and aerosol components that have a direct effect on air quality. These results can then be used to study the formation of aerosols from their precursor gases and how their concentration and composition vary with ...
-
PremiumManufactured by AMS, Inc.based in USA
Designed to be driven into the soil, opened for sample extraction, and removed for subsequent use. The AMS Retract-A-Tip is a survey tool for collection of discrete soil vapor samples below the ground surface, usually at discrete depths. The sampler is 300 series stainless steel, with a 400 series stainless steel drive tip. It may be driven to the sampling depth using an AMS slide hammer or ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The MerPAS® sampler fitted with the yellow body diffusive barrier is best used for sampling outdoor ambient air with highly elevated mercury concentrations (50 ng/m3). This sampler has a thicker diffusive barrier, thereby reducing the effective sampling rate to lessen Hg capture by the device. The sampling time is typically hours up to 7 days, depending on the expected Hg levels and project ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran Model 1110 Synchronized Two Port Sampling System gives the Model 2537 Mercury Vapor Analyzer the ability to sample two unique sources. Switching between the two sources is synchronized with the instrument sampling cycle and is fully programmable by the user. This is particularly useful for flux chamber studies to measure inlet and outlet concentrations, or gradient flux measurements at ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
The Advanced Energy Innova 3731 SF6 leak detection system uses photoacoustic spectroscopy (PAS) technology. It offers highly accurate and stable quantitative gas ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The MerPAS® sampler fitted with the white body diffusive barrier is best used for sampling outdoor ambient air of low to intermediate mercury concentrations (0-50 ng/m3). With the high trapping capacity of the MerPAS® substrate, the sampler may be deployed for intervals from 1 week up to 1 year. With air concentrations of 50 to 1000 ng/m3, the sampler can be deployed for time intervals of ...
-
PremiumManufactured by Elvatech Ltd.based in UKRAINE
An instant on-site elemental analysis is one of the necessities of the modern mining industry. ElvaX Geo offers you accurate data and ease of operation during geo-exploration or quality assurance. The instrument is designed specifically for long non-stop convenient operation. The unique 800 mm2 analytical spot analysis increases averaging of inhomogeneous samples. A composite pole helps you keep ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The Acme Quadset Refrigerant Gas Monitor is designed to detect refrigerant leaks in enclosed areas. The Monitor utilizes a sophisticated NDIR sensor specific to any one of the commercially available refrigerants. It can monitor over a range of 0-1000ppm with a resolution threshold as low as 1ppm. The QuadSet can monitor up to four locations in one of two modes of operation, diffusion or ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you