Air Sampling Equipment in New York

49 Results found

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Air & Climate ×

  • Subcategory: Air Sampling ×

  • In: USA ×

  • In: New York ×

ProHydro - Snap Sampler - Passive Groundwater Sampling System

by ProHydro, Inc.     based in Fairport, NEW YORK (USA)

The Snap Sampler is a patented (US Pat. 7,178,415) groundwater sampling device that employs a unique double-end-opening bottle with “Snap” sealing end caps. This dedicated, in-well equipment is deployed at the desired position in the screen interval with up to six Snap Samplers and six individual sampling bottles. The design allows for ...

Model TFIA-4 - Portable Re-Chargable Battery Pack and Charger

by Staplex - Air Sampler Division     based in Brooklyn, NEW YORK (USA)

Portable Air Sampler for indoor and outdoor sampling for all types of airborne particulates including environmental pollutants, nuclear and biohazards, industrial, governmental and military tests and studies, mine air hazards, factory dusts, chemical, radiological and toxicological analyses, as well as innumerable other types of research, quality ...

CONNCTOR, M - Model SS-400-1-4 - Swagelok for Air Sampling

by General Oceanics Inc.     Distributor in NEW YORK (USA)

CONNCTOR, M #SS-400-1-4 Swagelok. Tube OD x 1/4 in. Male NPT. Part number: AIRSAMP_18.

Microdust - Model Pro - Remote Noise Monitoring System / Remote Dust Emissions Monitoring System

by Casella     Office in Buffalo, NEW YORK (USA)

Microdust Pro is a rugged, hand-held, data logging instrument for the real-time detection of airborne dusts, fumes and aerosols. A quick, easy to use instrument, giving the user additional qualitative data which cannot be gained by gravimetric air sampling methods alone. This extremely versatile instrument can also be used with a range of ...

Model TFA41 - Filter Papers for High Volume Air Samplers

by Staplex - Air Sampler Division     based in Brooklyn, NEW YORK (USA)

Ashless paper. 95% collection efficiency of 1 micron. 58% DOP on 0.3 micron particles. Easily countable for Alpha particles, obtaining 70% count and a penetration absorbtion of approximately 30%. Good efficiency for industrial dusts and for particulate matter size 10 microns and under to submicron to .01 micron. Sampler may be operated for ...

GilAir - Model 3, 5 - Air Sampling Pumps

by Sensidyne     Distributor in NEW YORK (USA)

The GilAir pumps (GilAir-3 & GilAir-5) have one of the largest user bases of any air sampling pump worldwide. These reliable 3 and 5 liter per minute air sampling pumps have automatic constant flow assuring sampling is maintained within +/- 5% of the initial set point. Setting the flow rate on the GilAir-3 & GilAir-5 is ...

Gilian - Model 3500 - 3.5LPM, 5000 - 5LPM - Air Sampling Pumps

by Sensidyne     Distributor in NEW YORK (USA)

The Gilian® 3500 & 5000 are industry leaders in back-pressure performance, reliability and ease-of-use. These pumps offer flow rates up to 3500 & 5000 cc/min respectively. And thanks to several advanced features, these pumps overcome the main causes of sampling errors – saving you time and money. The air flow display holds ...

Model TFIA Series - High Volume Air Samplers

by Staplex - Air Sampler Division     based in Brooklyn, NEW YORK (USA)

Indoor or outdoor sampling of airborne particulates. 0-70 cubic feet per minute (cfm) [0-2 cubic meters per minute (cmm)] flow range. Spot or continuous monitoring. Portable and lightweight. Built-in rotometer for instantaneous flow reading. Includes 4' (10.16 cm) diameter filter holder assembly. For use in normal, non-explosive atmospheres. ...

Casella - Model Apex2 - Personal Air Sampling Pump

by Casella     Office in Buffalo, NEW YORK (USA)

The Apex2 range are the new generation of personal sampling pumps offering class beating performance combined with a slim ergonomic design. With the addition of Bluetooth® Connectivity you can monitor your sampling from your mobile device without having to disturb the wearer. Email run data alongside any photos or notes to make your reporting ...

Model GSP 300FT -2 - Air Sampling Pump

by Gastec Corporation     Distributor in NEW YORK (USA)

GASTEC developed a detector tube system utilising an electric suction pump in response to growing user needs for improvements in measuring time and routine in the working environment. Moreover, although the reagent filling density of detector tubes is generally high, making effective sampling with conventional electric suction pumps next to ...

Model 10M - Hydroblock Cable

by General Oceanics Inc.     Distributor in NEW YORK (USA)

Interconnecting cable between the block and the power supply.

Model TR-1 - Tripod Mounting

by Staplex - Air Sampler Division     based in Brooklyn, NEW YORK (USA)

Where normal flat surfaces are not available for conducting air sampling tests. The Staplex TR-1 Tripod is recommended for mounting the TFIA series High Volume Air Sampler. The Air Sampler and Tripod can be assembled and placed in any required location in a matter of minutes. Maximum extended height: 60' (152 cm) / Collapsed height: 22.5' (57 cm).

Gilian - Model Gilibrator-2 - Air Flow Calibrator

by Sensidyne     Distributor in NEW YORK (USA)

The Gilibrator-2 System provides users with a convenient and highly automated way to check almost any commercially available air sampling pump for proper air flow function before deployment. The system consists of an electronic Gilibrator-2 Base which is used with any of three sizes of wet bubble cells. These patented interchangeable components ...

Pinger - Model BFP-312 - Bottom Finding Benthos

by General Oceanics Inc.     Distributor in NEW YORK (USA)

195 dB source level 12 KHZ Bottom Finding Pinger used in conjunction with a standard 12KHZ shipboard bathymetric recorder to monitor height off the bottom of instruments or sampling equipment being lowered through the water column.

TUFF - Personal Sampling Pumps

by Casella     Office in Buffalo, NEW YORK (USA)

The TUFF personal sampling pumps cover a range of applications for the monitoring of dusts, fumes gases and vapours. Ergonomically designed to suit harsh environments the TUFF offers reliability and longevity in the field.

Gilian - Model LFS-113 - Low Flow Personal Air Sampling Pump (1 - 350 cc/min)

by Sensidyne     Distributor in NEW YORK (USA)

The LFS-113 is a compact low flow air sampling pump. Designed for flow rates between 1 cc/min and 350 cc/min, the LFS-113 is perfect for very low flow applications sampling with sorbent tubes. Compact size and light weight of this pump allow it to easily fit inside a shirt pocket.

Apex - Personal Sampling Pump

by Casella     Office in Buffalo, NEW YORK (USA)

The APEX personal sampling pump can be used in a range of applications from personal dust and solvent monitoring to indoor air quality monitoring.

GilAir - Model Plus - Personal Air Sampling Pump (1 - 5,000 cc/min)

by Sensidyne     Distributor in NEW YORK (USA)

Innovation Delivered: The ultimate personal air sampling pump delivering enhanced performance, greater versatility, and superior design and comfort.

Gilian - Model BDX-II - Personal Air Sampling Pump (500 - 3,000 cc/min)

by Sensidyne     Distributor in NEW YORK (USA)

The Gilian BDX-II is an economical air sampling pump designed specifically for abatement and lead applications. It is a compact and rugged air sampling pump optimized for sample methods between 500 cc/min and 3000 cc/min. The BDX-II is powered by a rechargeable NiCd battery that provides up to 10 hours of operation on a single charge.

Model SAM - Aluminum Outdoor Shelter

by Staplex - Air Sampler Division     based in Brooklyn, NEW YORK (USA)

U.S. EPA prescribed design for enclosed Outdoor Shelter for continuous sampling with maximum air flow. Protects filter from rain and other weather elements. Designed for use with TSP (Total Suspended Particulate) Systems. [requires SH810 filter holder assembly].

Need help finding the right suppliers?

Let the XPRTs do the work for you