Air Treatment Applications

37 Results found
Only show results available in Virginia?
OK
  • Category: Air & Climate ×

  • Subcategory: Air Treatment ×

PLAZKAT systems for treatment of food industry emissions

by Plasma Air Systems Corporation     based in Harju Maakond, ESTONIA

Manufacturing and processing food products produces emissions that must be treated. Firstly, emissions produced by heat-treating raw materials should be treated, in particular carboxylic acids, formaldehyde and acetone.

Air pollution control for the landfill methane remediation industry

by Catalytic Products International (CPI)     based in Lake Zurich, ILLINOIS (USA)

Methane gases used for electric generation or pipeline gas synthesis via membrane or pressure swing adsorption (PSA) processes – commonly use incinerators for air pollution control needs.

Air pollution control for the gas industry

by Catalytic Products International (CPI)     based in Lake Zurich, ILLINOIS (USA)

Treatment from amine or teg de-watering processes for gas utilities and distributers – commonly use thermal oxidizers for air pollution control needs.

PLAZKAT systems for treatment (removal, neutralisation) of smelly substances from the air

by Plasma Air Systems Corporation     based in Harju Maakond, ESTONIA

PLAZKAT Aero units are used to neutralize bad smells from waste treatment facilities, caused by the presence of sulfur and nitrogen compounds - hydrogen sulfide, mercaptans, and ammonia. Urban waste treatment facilities, local waste treatment systems in factories, pumping stations in waste water treatment systems are characterized by a strong smell of sulfur and nitric compounds.

Wastewater Treatment

by Babcock & Wilcox MEGTEC     based in De Pere, WISCONSIN (USA)

Many industrial and pharmaceutical processes generate wastewater with volatile contaminants that increase the COD and BOD to a point where discharging to municipal wastewater is very costly or not an option. These contaminants can be removed from the water by distillation, substantially lowering the disposal cost, and, in many cases, the removed components can be further purified and reused in the process. MEGTEC offers the following solutions to remove the volatile contaminants and make wastewater suitable for discharge to most municipal wastewater treatment plants: Stripping columns using direct steam or a reboiler Distillation columns using indirect steam heat sources Our technologies have been applied to a range of processes including wastewater treatment from industries such as Pharmaceutical, Semiconductor, Chemical and Petrochemical.

Air Pollution Control Solution for the Hydrogen Sulfide (H2S)

by Macrotek Inc.     based in Markham, ONTARIO (CANADA)

Hydrogen Sulfide is lethal if released. Macrotek is a leader in developing advanced technologies for optimum removal and treatment. Our experience includes many installations using caustic, oxidizing reagents, catalytic and forced oxidation combination, and biofilters. Each application is unique and requires custom solutions.

Waste to Energy

by Babcock & Wilcox MEGTEC     based in De Pere, WISCONSIN (USA)

We can treat the air streams from waste management plants, MBT (Mechanical Biological Treatment) reception and composting areas, Waste Water Treatment Plants (WWTP), Refuse Derived Fuel (RDF) Plants, gasification of waste, syngas, torrefaction, gas engines and biogas upgrading. In waste management plants and WWTP, we remove the odors that may be causing a nuisance to neighbors, with bioreactors using Biomass to degrade odorous components and where odors are particularly intractable or VOC emissions higher, thermal oxidizers to meet prescribed emission limits and odor levels. In RDF Plants, Syngas, Gasification, Gas Engine and Biogas Upgrading applications, we employ thermal oxidizers, particulate removal and DeNOX systems, for the control of VOC, NOx, CO and particulates to prescribed emission limits.

Power Generation

by Babcock & Wilcox MEGTEC     based in De Pere, WISCONSIN (USA)

MEGTEC is actively involved in providing Power Generation solutions for many applications ranging from utilizing process heat recovery systems to utilization with boilers, to recovering and utilizing Ventilation Air Methane (VAM) from coal mines. MEGTEC has developed VAM processing technologies for either abatement only and in combination with energy recovery and utilization. MEGTEC’s proven technologies are destroying methane while generating high quality carbon credits, electricity for coal mines and heating for local communities and facilities.

Electronics

by Babcock & Wilcox MEGTEC     based in De Pere, WISCONSIN (USA)

In the fast-changing electronics industry with its need for new materials and products, demand for 100% uptime, smooth production operation, many in clean-room environments, MEGTEC meets and exceeds continuous demand for raising the bar of technology excellence. MEGTEC works either directly with the end user or through engineering firms or contractor companies, offering tested package systems as required and our end user list includes most of the well-known manufacturing companies around the globe including producers of ceramic condenser/capacitor, thin film FCCL, solar back film, plasma and LCD screen makers in Asia. We have the breadth of technologies in our portfolio and with our strong engineering design capabilities, collaborate from each of our global facilities and can review your application and recommend the best solution.

VOC emission treatment for flexographic industry

by Tecam Group     based in Llinars del Vallès, SPAIN

As for VOC emission treatment, each Industry has its own technical requirements. As a technology supplier, we at Tecam Group are familiar with the production processes and requirements of Flexographic manufacturers, and have a deep understanding of the technology they require for exhaust air emission treatment, and specifically, for Volatile Organic Compounds VOC emission treatment.

VOC emission treatment for chemical industry

by Tecam Group     based in Llinars del Vallès, SPAIN

As for VOC emission treatment, each Industry has its own technical requirements. As a technology supplier, we at Tecam Group are familiar with the production processes and requirements of Chemical manufacturers, and have a deep understanding of the technology they require for exhaust air emission treatment, and specifically, for Volatile Organic Compounds VOC emission treatment.

VOC emission treatment for pharmaceutical industry

by Tecam Group     based in Llinars del Vallès, SPAIN

As for VOC emission treatment, each Industry has its own technical requirements. As a technology supplier, we at Tecam Group are familiar with the production processes and requirements of Pharmaceutical manufacturers, and have a deep understanding of the technology they require for exhaust air emission treatment, and specifically, for Volatile Organic Compounds VOC emission treatment.

Air pollution control solution for the particulate matter

by Macrotek Inc.     based in Markham, ONTARIO (CANADA)

Regulations around the globe are becoming more and more stringent for particulate emissions. Macrotek offers some of the most efficient wet and dry technologies to meet the latest EPA, EU, and MOE standards. Often, particulate collection is combined with acid gas removal. Our most advanced wet-dry system meets and exceeds the most stringent regulations for both hazardous gases and particulate.

Still Mill Furnace Dust Filtration

by Zhejiang Grace Envirotech Co., Ltd     based in XIAOSHAN, CHINA

Steel Plant Blast Furnace Filter Nomex Filter Bags ,Aramind Needle Felt  Aramid Filter Bag.

PLAZKAT systems for treatment of woodworking industry emissions (plywood, woodchip and wood-fiber production)

by Plasma Air Systems Corporation     based in Harju Maakond, ESTONIA

One of the problems arising in wood processing and production of popular materials based on wood, such as plywood, wood-chip and wood-fiber materials (chipboard, hardboard, OSB) is removing harmful substances from the air. Emissions from these industries are characterized primarily by the presence of phenol and formaldehyde, and the level of discharge is significant, up to 100 000 m3/hour of contaminated air.

Air Pollution Control Solution for the HCl, HF, and Halides

by Macrotek Inc.     based in Markham, ONTARIO (CANADA)

The severity of these contaminants requires the most advanced removal and treatment technologies. Macrotek has extensive experience in designing systems that will meet and exceed customers` requirements and regulations. In addition, the corrosive nature of these gases requires specific consideration for material selection.

Disinfection of air-conditioning systems

by Dimtech S.A     based in Keratsini, GREECE

The good condition of an air-conditioning system in terms of hygiene is a key element in maintaining at a high level the quality of indoor air. In this way an important factor in human health is ensured. The basic steps related to the hygiene of an air-conditioning installation are: Mechanical cleaning of vents. Chemical cleaning and disinfection.

Cement

by Babcock & Wilcox MEGTEC     based in De Pere, WISCONSIN (USA)

MEGTEC's extensive scrubber experience applies to the cement manufacturing process for the effective control of SO2 and HCl by the injection of lime slurry. Our customers can achieve up to 90% reduction of SO2 and 98% reduction of HCl using microfine or standard lime. The TurboSorb Spray Dryer Absorber (SDA) can often retrofit into an existing gas conditioning tower, or downcomer duct, to avoid the high cost of new capital equipment.

Automotive and Industrial Painting

by Babcock & Wilcox MEGTEC     based in De Pere, WISCONSIN (USA)

Reliability. Uptime. Uninterrupted Production - all are essential requirements in painting and finishing applications. Just-in-time manufacturing demands uninterrupted production and smooth pressure control that eliminates pressure fluctuations in the painting and finishing process. MEGTEC has supplied many systems to Tier 1 and Tier 2 automotive plants where high volume, low concentration exhaust streams are treated economically and effectively, yet adaptable to changing finishing formulations.

Need help finding the right suppliers?

Let the XPRTs do the work for you