Air Treatment Plant (Air Treatment) Equipment Available In Australasia
-
Manufactured by Donau Carbon Technologies S.r.l. (DCT)based in ITALY
Donau Carbon Technologies Srl designs and supplies complete lines for the treatment of dust and gases polluted flows. The main installations have been done for the treatment of flue gases coming from industrial process, therefore characterized by high concentration of specific pollutants.For example, Donau Carbon Technologies Srl realized ...
-
Manufactured by Expansion Electronic SRLbased in ITALY
The M Series modules are suitable for installation downstream of air treatment systems/plants, scrubbers or cartridge filters or pipeline sections where the filtration of the air from specific industrial processes such as welding process, die casting, turning and laser cutting is required. ...
-
Manufactured by Wuxi Dajiang Environmental Technology Co., Ltd.based in CHINA
DAF dissolved air flotation consists of flotation tank, dissolved air system, reflux pipe, dissolved air released system, skimmer (Based on customer needs, there are combined type, traveling type and chain-plate type to choose.), electric cabinet and so on. Air flotation separation technology of DAGYEE DAF dissolved ...
-
Manufactured by Wuxi Dajiang Environmental Technology Co., Ltd.based in CHINA
Dissolved air flotation is very widely used in treating the industrial wastewater effluents from oil refineries, petrochemical and chemical plants, natural gas processing plants, paper mills, general water treatment and similar industrial facilities. YMRF series DAF is specialized used to remove industrial and municipal sewage ...
-
Manufactured by Ventilatorenfabrik Oelde GmbHbased in GERMANY
to the workplace improves the capture of contaminants and guarantees that the staff can breathe cleaner air. Compliance with legal thresholds is reliably ensured and company regulations ...
-
Manufactured by Ventilatorenfabrik Oelde GmbHbased in GERMANY
Complete solutions to keep workplaces free from gases and dust. In numerous processes in a wide variety of sectors, gases and dust are released which could reach concentrations that endanger health in the workplace if not extracted via air-processing systems. Venti’s engineers develop complete solutions for workplaces, cabins, ...
-
Manufactured by Ventilatorenfabrik Oelde GmbHbased in GERMANY
Clean and dispose of fumes containing contaminants. For cooling processes as well as for the chemical or physical treatment of materials or surfaces, liquids are used that either partially or fully evaporate. Venti Oelde collects the fumes containing the contaminants (directly at the place where they are produced, if possible) cleans ...
-
PremiumManufactured by Aerzener Maschinenfabrik GmbHbased in GERMANY
Negative pressure stage with pre-inlet cooling. Proven 3-lobe blower technology for system manufacture for forced conveying in negative pressure up to 80 % vacuum. Oil-free and extremely robust. Belt or direct drive version. Ideal for bulk and silo ...
-
PremiumManufactured by Aerzener Maschinenfabrik GmbHbased in GERMANY
Robust 2- and 3-lobe blower stage for mounting on bulk and silo vehicles with extended pressure differences up to 1.2 bar. Two-sided conveying direction with horizontal or vertical flow. Direct or belt drive version. Proven technology, ...
-
PremiumManufactured by Aerzener Maschinenfabrik GmbHbased in GERMANY
Robust 3-lobe blower stage for system manufacture. Versatile application. Designed for belt drive. Low pulsation and reduced piping noise. Available in 22 sizes as ...
-
Manufactured by Clim.Air.50 s.r.l.based in ITALY
In these sections, the steam is put in the air treatment plant through stainless steel distributors depending of the required capacity; the sections are equipped with inspection doors. On demand are supplied and installed on the machine, the steam producers of the type with immersed electrodes. Humidification type adiabatic with sprinkled ...
-
Manufactured by ATP Environment Srlbased in ITALY
In every air treatment plant an suction system is required to capture the process air and convey it to the ATP purification plant. These systems are essential and must be designed ad hoc according to the process specifications. ...
-
Manufactured by Muntersbased in USA
One single stage or 2 superposed V shaped units on 2 support layers. Flushing systems are installed on either up- and/ or downstream side of the mist eliminators. Target applications are Flue gas desulphurization plants for processes with high turn down ratios, Exhaust air treatment plants, Waste Incineration ...
-
Manufactured by Muntersbased in USA
a liquid film which is subsequently drained off as a result of gravity. V-shaped impressions on the separator plates ensure that the liquid is drained off in the correct manner, dropping back against the vertical gas stream into the sump. Target applications Evaporators Absorbers Gas scrubbers Desulphurization units Gas coolers Exhaust air ...
-
Manufactured by Muntersbased in USA
can be reduced up to 600mm without reducing any comfortable access to the stages for cleaning purposes. Target applications Flue gas desulphurization plants for processes with high turn down ratios Exhaust air treatment plants Waste Incineration plants Material PPTV, PPHT, PP, FRP, PPGC, PSU, Stainless steel ...
-
Manufactured by Lesni A/Sbased in DENMARK
LESNI delivers tailormade dust filters for removing soot, tar, smoke, fine dust particles, droplets and particulates as part of total air purification solution. The dust filters are typically placed in the air duct system upstream of the waste air treatment plant, designed according to the needs and requirement ...
-
Manufactured by Bonnel Technologie s.r.o.based in CZECH REPUBLIC
Compact and reasonable priced control unit for small air-SBR wastewater treatment ...
-
Manufactured by Binder Group GmbHbased in GERMANY
The VACOMASS® elliptic diaphragm control valve is a technically optimized diaphragm control valve with an elliptical aperture for precise, lowpressureloss control and distribution of aeration air in wastewater treatment plants. It closes bubble-tight. For sensitive control of axial and tangential flows (e.g. after elbows) the flow axis ...
-
Manufactured by Galli Aldo Srlbased in ITALY
Galli Aldo Srl deals with the design, production and installation of suction, fume abatement, antacid deodorization systems for Chemical, Pharmaceutical, Food, Galvanic, Iron and Steel Industries and wherever the use of antacid material is required. ...
-
Manufactured by PF10 Impianti Industrialibased in ITALY
The Plant Division designs and builds plants for the treatment of water and gaseous streams, ultra- and nano-filtration systems for process fluids and waste water. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you