Air Velocity Monitoring Equipment For Air And Climate Available In Vatican City
-
PremiumManufactured by Testo, Inc.based in USA
The testo 510 digital manomenter is an all in one, low pressure measurement solution. The 510 can measure total external static pressure, differential pressure, duct velocities, manifold pressures, and air flow with pitot tube (optional). With the testo 510, performing system tests has never been easier using our single, easy to use, rugged, compact digital manometer. Its small form factor, ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The DF-ERHV-DTE Series Air Sampling Systems are designed for temporary or emergency response continuous air sampling applications. The DF-ERHV-DTE Series Air Samplers feature a brushless motor with electronic motor speed control that maintains a user selectable flow rate. The flow rate range attainable through the filter media is dependent upon the air porosity of the filter media. Flow rates as ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The GAS-60810DT Series Air Sampling Systems are designed for remote unattended continuous air sampling applications. The GAS-60810DT Series Air Samplers feature a brushless motor with electronic motor speed control that maintains a user selectable flow rate. The flow rate range attainable through the filter media is dependent upon the air porosity of the filter media. Flow rates as high as 200 ...
-
PremiumManufactured by Optical Scientific Inc. (OSi)based in USA
The OFS-2000F was designed specifically for Flares stack sand reports flow velocities from 0.03 - 170 m/sec with a ± 2% accuracy. OSi's patented Optical Flow Sensor (OFS) makes drift-free measurements across the entire stack, duct or pipe diameter and calculates an accurate average flow reading. It is the only flow sensor that gives a true non-contacting cross-stack flow measurement of ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The GAS-60810-MHVE Series Air Sampling Systems are designed for remote unattended continuous air sampling applications. The GAS-60810-MHVE Series Air Samplers feature a brushless motor with electronic motor speed control that maintains a user selectable flow rate. The flow rate range attainable through the filter media is dependent upon the air porosity of the filter media. Flow rates as high as ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The DF-60810DTE Series Air Sampling Systems are designed for remote unattended continuous air sampling applications. The DF-60810DTE Series Air Samplers feature a brushless motor with electronic motor speed control that maintains a user selectable flowrate. The flowrate range attainable through the filter media is dependent upon the air porosity of the filter media. The DF-60810DTE Series design ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The GAS-604DT Series Air Sampling Systems are designed for remote unattended continuous air sampling applications. The GAS-604D Series Air Samplers feature a brushless motor with electronic motor speed control that maintains a user selectable flow rate. The flow rate range attainable through the filter media is dependent upon the air porosity of the filter media. Flow rates as high as 85 m3/hr ...
-
PremiumManufactured by Testo, Inc.based in USA
Precise, reliable measurement of all air velocity and IAQ parameters with just one measuring instrument – the testo 440 dP. This multifunction measuring instrument is intuitive and easy to use, thanks to its integrated differential pressure sensor and clearly structured measurement menus. Adjusting air conditioning and ventilation systems, monitoring air quality, and carrying out comfort ...
-
PremiumManufactured by Optical Scientific Inc. (OSi)based in USA
The OFS-2000W model is equipped with Automatic Gain Control (AGC) to compensate for variations in opacity caused by particulate matter or moisture carried in the flow. OSi's patented Optical Flow Sensor (OFS) makes drift-free measurements across the entire stack, duct or pipe diameter and calculates a true average flow reading. The OFS 2000-W model is equipped with Automatic Gain Control (AGC) to ...
-
PremiumManufactured by Testo, Inc.based in USA
This testo 440 kit is great for carrying out measurements in ventilation ducts. The testo 440 air velocity and IAQ measuring instrument and its vane probe (Ø 0.63") can all be safely stored in the included ...
-
PremiumManufactured by Optical Scientific Inc. (OSi)based in USA
The OFS-2000P Particulate and Flow sensors report Air Flow and a general Particulate loading and percent opacity in virtually any operating condition. OSi's patented Optical Flow Sensor (OFS) makes drift-free measurements across the entire stack, duct or pipe diameter and calculates an accurate average flow reading. It is the only flow sensor that gives a true non-contacting cross-stack flow ...
-
PremiumManufactured by Optical Scientific Inc. (OSi)based in USA
The OFS-2000 has a range of 0-40m/sec and is the only flow sensor that gives a true non-contracting cross-stack flow measurement of the process. OSi's patented Optical Flow Sensor (OFS) makes drift-free measurements across the entire stack, duct or pipe diameter and calculates an accurate average flow reading. It is the only flow sensor that gives a true non-contacting cross-stack flow ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The GAS-604DTE Series Air Sampling Systems are designed for remote unattended continuous air sampling applications. The GAS-604DTE Series Air Samplers feature a brushless motor with electronic motor speed control that maintains a user selectable flow rate. The flow rate range attainable through the filter media is dependent upon the air porosity of the filter media. Flow rates as high as 85 m3/hr ...
-
Manufactured by AirSense Finland Oybased in FINLAND
The Air Velocity Transmitter AVT-8 is an accurate, cost-effective sensor for nearly any market where air flow must be monitored. AVT-8 is robust, easily installed and can be used in a wide variety of applications and able to measure airflow 0.3 – 8.0 m/s and air temperature 0 – 50 ...
-
Manufactured by Applied Technologies, Inc. (ATI)based in USA
The 'Sx' style Ultrasonic Anemometer is a 3 axis, 3d, 15 cm, scientific Ultrasonic Anemometer that has been designed for environmental monitoring where the horizontal wind measurements are required to be in the same plane. The W component measurement on the upwind side of the probe provides the most accurate and unobstructed value of vertical winds. The electronics are contained within the ...
-
Manufactured by Applied Technologies, Inc. (ATI)based in USA
The 'V' style Ultrasonic Anemometer is a 3 axis, 3d, 10 cm, scientific Ultrasonic Anemometer that is a special design for turbulence, where eddy measurements must be the smallest, for flux measurements in plant and forest canopies where wind speeds are very low and directions are highly unpredictable. The electronics are contained within the probe bar. It operates on DC power with a power ...
-
Manufactured by FLIR Commercial Systems Inc - Extech Instrumentsbased in USA
The 45118 is a Waterproof pocket sized Thermo-Anemometer for Air Velocity, Temperature and Wind-chill measurements. Simultaneously display Air Velocity and Temperature or Wind-chill on the LCD screen. Selectable averaging function of 5, 10, or 13 second intervals. Fold up protective housing extends to 9 in. (229mm) for a better reach. Tripod mountable. Features Data Hold with Auto power off ...
-
Manufactured by Cruma – Diantech Solutions S.Lbased in SPAIN
Perfect for applications at high temperature (max. 60ºC) that require a high working space. This model is ideal to remove gaseous polluting agents and/ or solid particles/aerosols from the working space in a simple, effi cient and cost effective way, protecting both the user and the environment. CRUMA 1010 ductless fume hood uses the CRUMA fi ltration ...
-
Manufactured by Kurz Instruments, Inc.based in USA
The Model 2445 Portable Velocity Meter is a rugged, portable air velocity meter for a wide variety of very high temperature (500°C) industrial applications. The Model 2445 is mainly used for velocity, flow rate and temperature traverse measurements in larger pipes, ducts and stacks. Most applications are coal-fired power plant stacks, primary and secondary air ducts. The Model 2445 has a ...
-
Manufactured by Delta OHM - member of the GHM GROUPbased in ITALY
The HD2103.1 and HD2103.2 are portable instruments with a large LCD display. They are designed for use in the fields of air conditioning, heating, ventilation and environmental comfort. They use hot-wire or vane probes to measure air speed, flow rate, and temperature inside pipelines and vents. Temperature only is measured by immersion, penetration or air contact probes. The temperature sensor ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you