Ambient Air Contaminants Equipment For Air And Climate Available In Maldives
-
PremiumManufactured by Synspec BVbased in NETHERLANDS
Monitoring of benzene, toluene, ethylbenzene, xylenes (BTEX) and other hydrocarbons in the ambient air. Synspec GC955 601 gas chromatograph (GC) is built specifically for the measurement of BTEX in ambient air. It can be utilised to simultaneously detect and measure up to 40 different components. The settings of the system can be also customised to include specific components that the client ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The MerPAS® sampler fitted with the yellow body diffusive barrier is best used for sampling outdoor ambient air with highly elevated mercury concentrations (50 ng/m3). This sampler has a thicker diffusive barrier, thereby reducing the effective sampling rate to lessen Hg capture by the device. The sampling time is typically hours up to 7 days, depending on the expected Hg levels and project ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
A GC/PID for automatic monitoring of BTEX in air, water and soils This instrument uses a port valve with a single absorbent trap, and a 30 meter metallic 0.28 mm ID column. Minimum detection level as low as 10 ppt for application Benzene or 1,3-Butadiene in ambient air. Miniaturization, sensitivity, mobility and flexibility are its main features. Everything from the sample port up to the data ...
-
PremiumManufactured by Lumex Instrumentsbased in CANADA
BA-15 is a multifunctional benzene analyzer based on the differential absorption spectrometry using the direct Zeeman effect. Due to the low power consumption and light weight the spectrometer is especially useful in the natural gas production and processing industries, in which benzene is often main ...
-
PremiumManufactured by Lumex Instrumentsbased in CANADA
RA-915AM monitors are designed for continuous mercury measurements in ambient air, indoor air and in natural gas. Ideal for permanent unattended installation at air monitoring stations, RA-915AM monitor for ambient air allows ultra-sensitive measurements of background Hg concentrations and is compliant with the European standard EN 15852 for ambient air ...
-
PremiumManufactured by Synspec BVbased in NETHERLANDS
Mid-range air measurements in cities or near industrial areas. The Alpha 115 Methane/TNMHC Analyser is a gas chromatograph (GC) specifically designed to measure concentrations of greenhouse gas methane in the ambient air. Simultaneously, the analyser provides the sum of all other hydrocarbons in the same measurement cycle for better determination of the total air pollution. The method utilised ...
-
PremiumManufactured by Synspec BVbased in NETHERLANDS
High-range stack measurements up to 1000 ppm. Synspec Alpha 116 gas chromatograph (GC) is built for continuous stack monitoring with high-range detection limits, up to 1000 ppm. Alongside the measurement of greenhouse gas methane, the analyser detects and presents the sum of all other hydrocarbons, ensuring precise measurement of the total air pollution. The method utilised ensures that the ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The Tekranh Model 1130 Oxidized Mercury Speciation Unit expands the Model 2537 Mercury Vapor Analyzer capabilities to simultaneously monitor elemental and gaseous oxidized mercury (GOM, aka RGM) species in ambient air. The patented Model 1130 is the only system in the world capable of automated mercury speciation determinations in air. The Model 1130 is an invaluable tool for mercury detection, ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran Model 1135 Particulate Mercury Module connects seamlessly to the top of the Model 1130 to continuously monitor ambient air particulate bound mercury (HgP), gaseous oxidized mercury (GOM) and gaseous elemental mercury (GEM). The complete Tekran 2537-1130-1135 Atmospheric Mercury Speciation System provides fully automated, unattended operation to determine all three mercury species ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The MerPAS® sampler is small in size and is compatible with personal sampling. For this configuration, the yellow body diffusive barrier is used without any protective housing. The sampler is attached to a plastic plate and then attached to the lapel or shirt pocket to keep the device near the worker breathing zone. Typically, the sampler would be worn for the the full 8-hour workday. ...
-
PremiumManufactured by BD|SENSORS GmbHbased in GERMANY
The separable stainless steel probe LMK 358H has been designed for level measurement in waste water, waste and higher viscosity media. Basic element is a capacitive ceramic sensor. In order to facilitate stock-keeping and maintenance the transmitter head is plugged to the cable assembly with a connector and can be changed easily. Features: - nominal pressure range 0 ... 60 cmH2O up to 0 ... 100 ...
-
PremiumManufactured by ENVEAbased in FRANCE
Very small, ultra-light, with on-board GPS, data logger, battery pack and color TFT display for very comfortable and easy mercury monitoring in ambient air and other gases. Portable mercury monitoring and detection is made easy with the Mercury Tracker 3000 XS. Lightweight, rugged construction and compact, the instrument is perfect for indoor and outdoor screening of mercury concentration in ...
-
PremiumManufactured by Synspec BVbased in NETHERLANDS
Continuous emissions monitoring system (CEMS) for high-range stack measurements. Synspec Delta 116 is a continuous emissions monitoring system (CEMS) built specifically for high-range stack measurements according to US EPA 25A. The analyser provides the sum of all other hydrocarbons in the same measurement cycle for better determination of the total air pollution. The method utilised ensures that ...
-
PremiumManufactured by ENVEAbased in FRANCE
The AirSafe PM provides continuous and precise monitoring of dust exposures in indoor ambient air. The AirSafe PM can be used for indoor workplace exposure monitoring, utilizing the high range and low range sensors to detect and track particulate exposure limits and limit violations. Health and safety personnel can use the measurement data to provide a safe working environment and report site ...
-
PremiumManufactured by ENVEAbased in FRANCE
PM10, PM2.5 and PM1 fine dust concentration measurement in the range 0-10,000 μg/m3 using the Standard Reference Method. The MP101M particulate analyzer uses the standard ISO 10473 beta gauge measurement method for the continuous measurement of the concentration of fine dust in ambient air. The instrument is certified equivalent to the reference method in accordance with the EN12341 European ...
-
PremiumManufactured by Oizom Instruments Pvt. Ltd.based in INDIA
The Dustroid Smart is an air particulate monitoring device specially developed to monitor ambient dust particles. The Dustroid Smart is a compact and connected optical particle counter which offers near real-time particulate matter count. The easy to install and the requirement for minimal space for deployment make it a scalable solution to create a dense network of data points. The Smart version ...
-
PremiumManufactured by BD|SENSORS GmbHbased in GERMANY
The separable stainless steel probe LMK 358 has been designed for level measurement in waste water, waste and higher viscosity media. Basic element is a capacitive ceramic sensor. In order to facilitate stock-keeping and maintenance the transmitter head is plugged to the cable assembly with a connector and can be changed easily. Features: - nominal pressure: 0 ... 40 cmH2O up to 0 ... 100 mH2O - ...
-
PremiumManufactured by Oizom Instruments Pvt. Ltd.based in INDIA
Dustroid is a Continuous Air Particulate Monitoring system to measure the concentration of dust particulates in the ambient air. The dust monitor range is capable of monitoring various sizes of particulates ranging from 1 micron to 100 microns such as Ultrafine Suspended Particulate Matter PM1 (UFPM), Respiratory Particulate Matter PM2.5 (RSPM), Suspended Particulate Matter PM10 (SPM), and Total ...
-
PremiumManufactured by Elvatech Ltd.based in UKRAINE
PmX-5050 is a fully stand-alone device for continuous analysis of particulate matter (PM) elemental composition, intended for online elemental analysis of heavy metals in the ambient air. Particulate matter’s presence in the air and its overall accumulation in the environment are the subjects of growing public concern, especially in the manufacturing facilities, plants, and factories ...
-
PremiumManufactured by ENVEAbased in FRANCE
Designed to automatically sample particulates on filters using a TSP, PM10, PM2.5 or PM1 inlet. PM162M is a sequential automatic sampling device for particulate matter in the ambient air. The particles are sampled at constant flow rate (1 m3/h or 2.3 m3/h) and collected on filters for gravimetric weighing and possible physicochemical laboratory ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you