Ambient Air Contaminants Equipment For Air And Climate In Malaysia
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
Ammonia analyzer (NH3) at ppm level Ambient air and Emission ...
-
PremiumManufactured by ENVEAbased in FRANCE
The AirSafe PM provides continuous and precise monitoring of dust exposures in indoor ambient air. The AirSafe PM can be used for indoor workplace exposure monitoring, utilizing the high range and low range sensors to detect and track particulate exposure limits and limit violations. Health and safety personnel can use the measurement data to provide a safe working environment and report site ...
-
PremiumManufactured by ENVEAbased in FRANCE
PM10, PM2.5 and PM1 fine dust concentration measurement in the range 0-10,000 μg/m3 using the Standard Reference Method. The MP101M particulate analyzer uses the standard ISO 10473 beta gauge measurement method for the continuous measurement of the concentration of fine dust in ambient air. The instrument is certified equivalent to the reference method in accordance with the EN12341 European ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
A GC/FID instrument for Volatile and Semi Volatile Hydrocarbons measurement in ambient air. The airmoVOC C6C20+ is used to monitor VOCs up to the semi volatile hydrocarbons in industrial site, tropical forest and on site under decontamination. With detection limit as low as 1 ppt for Benzene or Naphthalene the system can measure gaseous PAHs in ambient air in continue up to Fluorene and linear ...
-
PremiumManufactured by ENVEAbased in FRANCE
Very small, ultra-light, with on-board GPS, data logger, battery pack and color TFT display for very comfortable and easy mercury monitoring in ambient air and other gases. Portable mercury monitoring and detection is made easy with the Mercury Tracker 3000 XS. Lightweight, rugged construction and compact, the instrument is perfect for indoor and outdoor screening of mercury concentration in ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
A GC/PID for automatic monitoring of BTEX in air, water and soils. This instrument uses a port valve with a single absorbent trap, and a 30 meter metallic 0.28 mm ID column. Minimum detection level as low as 10 ppt for application Benzene or 1,3-Butadiene in ambient air. Miniaturization, sensitivity, mobility and flexibility are its main features. Everything from the sample port up to the data ...
-
PremiumManufactured by BD|SENSORS GmbHbased in GERMANY
The separable stainless steel probe LMK 358 has been designed for level measurement in waste water, waste and higher viscosity media. Basic element is a capacitive ceramic sensor. In order to facilitate stock-keeping and maintenance the transmitter head is plugged to the cable assembly with a connector and can be changed easily. Features: - nominal pressure: 0 ... 40 cmH2O up to 0 ... 100 mH2O - ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
A GC/PID for automatic monitoring of BTEX in air, water and soils This instrument uses a port valve with a single absorbent trap, and a 30 meter metallic 0.28 mm ID column. Minimum detection level as low as 10 ppt for application Benzene or 1,3-Butadiene in ambient air. Miniaturization, sensitivity, mobility and flexibility are its main features. Everything from the sample port up to the data ...
-
PremiumManufactured by BD|SENSORS GmbHbased in GERMANY
The separable stainless steel probe LMK 358H has been designed for level measurement in waste water, waste and higher viscosity media. Basic element is a capacitive ceramic sensor. In order to facilitate stock-keeping and maintenance the transmitter head is plugged to the cable assembly with a connector and can be changed easily. Features: - nominal pressure range 0 ... 60 cmH2O up to 0 ... 100 ...
-
PremiumManufactured by Elvatech Ltd.based in UKRAINE
PmX-5050 is a fully stand-alone device for continuous analysis of particulate matter (PM) elemental composition, intended for online elemental analysis of heavy metals in the ambient air. Particulate matter’s presence in the air and its overall accumulation in the environment are the subjects of growing public concern, especially in the manufacturing facilities, plants, and factories ...
-
PremiumManufactured by ENVEAbased in FRANCE
Using a proven flame ionisation detector (FID), the analyzer HC51M measures ambient air hydrocarbons (THC, CH4, nmHC) in the range 0-1000 ...
-
PremiumManufactured by ENVEAbased in FRANCE
Designed to automatically sample particulates on filters using a TSP, PM10, PM2.5 or PM1 inlet. PM162M is a sequential automatic sampling device for particulate matter in the ambient air. The particles are sampled at constant flow rate (1 m3/h or 2.3 m3/h) and collected on filters for gravimetric weighing and possible physicochemical laboratory ...
-
PremiumManufactured by ENVEAbased in FRANCE
Continuous dust monitoring in ambient air: control system areas, silo areas, boiler houses, work stations. AirSafe 2 is an electrodynamic dust sensor monitoring leakages and dust concentration in ambient air in production facilities or workplaces. This versatile sensor allows you to keep under control your ambient environment. An alarm is generated when a threshold is ...
-
Manufactured by Tisch Environmental Incbased in USA
PUF for Pesticide Particulate/Vapor Air Sampler: Complete with outdoor anodized aluminum PUF shelter, aluminum blower motor assembly, 4' particulate/vapor sampling module, flow venturi calibration valve system, 0-100' magnehelic gage, motor voltage control/elapsed time indicator, (10' exhaust hose, and 7-day mechanical timer (110v/60hz or ...
-
Manufactured by Carbolite Gero Ltd - part of Verder Scientificbased in UNITED KINGDOM
Most common for special atmospheres and ultra high vacuum are the following options (details below): Fully controlled inert gas atmosphere in vacuum chamber furnaces. Reactive gases (H2, CO, CO2, H2S, H2O, CH4 & C2H4 and others on request) option. Vacuum pump options. Partial pressure option. Afterburner (thermal, catalytic or with active propane gas flame) option. Modified atmosphere with ...
-
Manufactured by Protea Limitedbased in UNITED KINGDOM
Quadrupole Mass Spectrometer Analyser System for low volume, quick responding gas measuring with large dynamic range Protea’s ProMass analyser is a compact, robustly designed semi-portable Quadrupole Mass Spectrometer (QMS) instrument incorporating all the latest mass spectrometer and vacuum pumping technology. ProMass can be supplied in portable carry case or a 6U 19” rack module for ...
-
Manufactured by Droplet Measurement Technologies (DMT)based in USA
Our Micro Pulse LiDARs use photon-counting detectors with high quantum efficiency at the chosen wavelength, coupled with high pulse rate, lower energy per pulse lasers. When combined with extremely stable optics this efficient approach to photon management leads to much higher sensitivity than big pulse alternatives for detecting and monitoring ambient air particulate, monitoing emissions, ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you