Ambient Air Quality Monitoring (AAQM) Equipment For Air And Climate Available In British Columbia
-
ShowcaseManufactured by Oizom Instruments Pvt. Ltd.based in INDIA
Polludrone is a fully integrated outdoor air quality monitoring system that delivers reference equivalent performance. Polludrone is a sensor-based air quality monitoring system for all the critical ambient environmental parameters related to air quality, noise, odour, weather, radiation. In addition, meteorological parameters like wind speed, wind direction, rainfall, flood levels, and ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
AM-5 series is a simple modularization system and auxiliary system of air quality continuous monitoring based on compact outdoor temperature control system. The temperature control is designed for the entire monitoring system. It can be configured with a variety of monitoring factors which is in accordance with Chinese and USA EPA standard measurement principle including 03, 802, NOx, CO and voe, ...
-
Premiumbased in USA
The FEM-capable Ozone Module helps you confirm ozone attainment. The Clarity Ozone Module is based on best-in-class technology from 2B Technologies, and provides accurate measurements of ozone in air over a wide dynamic range extending from a few parts-per-billion by volume (ppb) to an upper limit of 100 parts-per-million (ppm) based on the well-established technique of absorption of ultraviolet ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
AM-6 Micro Air Monitoring System is a small online environmental monitoring system based on high precision(ppb level) gas sensor. It provides flexiable sensor combination scheme and modular design, as well as online monitoring of PM10,PM2.5,SO2,NO2,O3,CO,VOCs,temperature, humidity and other factors in the atmosphere. Special factors can also be qulckly configured according to the actual ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
EQMS-200 online VOC monitoring instruments adopts PID (photoionization detector) for gas detection. The target gas is irradiated I bombarded by ultraviolet light produced by the ion lamp, and is ionized after absorbing enough UV energy. The concentration of the target gas can be detected by detecting the tiny current generated after the ionization of the gas. This type of VOC monitoring ...
-
PremiumManufactured by Oizom Instruments Pvt. Ltd.based in INDIA
The Polludrone Smart is an air quality monitoring device specially developed to monitor ambient air quality. The Polludrone Smart is a compact and connected CAAQMS which offers near real-time air quality data of all the National Air Quality Index (NAQI) parameters. The ease of installation and the requirement for minimal space for deployment makes it a scalable solution to be deployed at multiple ...
-
PremiumManufactured by ENVEAbased in FRANCE
PM10, PM2.5 and PM1 fine dust concentration measurement in the range 0-10,000 μg/m3 using the Standard Reference Method. The MP101M particulate analyzer uses the standard ISO 10473 beta gauge measurement method for the continuous measurement of the concentration of fine dust in ambient air. The instrument is certified equivalent to the reference method in accordance with the EN12341 European ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
OPSIS offers a range of calibration equipment for use with the air quality monitoring systems. The system is based on the CB100 calibration bench. This is used with an external CA150 lightsource and with an RE060 receiver at each end of the bench itself. Calibration is carried out by inserting cells with transparent windows into the short light path. Calibration gases are flushed through the ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
OPSIS LD500 Analyser is the central unit in the laser diode gas monitoring system. It can house up to four laser diode heads. Each head is a complete laser control and data sampling system. The laser diode gas analyser provides very fast monitoring of a range of gaseous compounds. Several gases can be monitored and a multiplexer offers several monitoring paths. Typical compounds are carbon ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
OPSIS OC500 ozone calibrator is used to calibrate OPSIS Air Quality Monitoring stations. The calibrator generates a well defined ozone concentration which could be preset by the user. It is designed to generate very high ozone concentrations, sufficient for performing accuracy audit and precision ...
-
PremiumManufactured by ENVEAbased in FRANCE
Measuring of Total Gaseous Mercury (TGM) in air and other gases. Reliable for measurements at ultra-trace levels (sub-ng/m³) according to EN 15852. The UT-3000 operates automatically. All functions are controlled by an embedded microprocessor. When measurements are carried out, all parameters and results are stored in the integrated data logger. With standard settings the data logger has a ...
-
PremiumManufactured by Bertin Technologiesbased in FRANCE
The Coriolis Compact is a dry Cyclonic air sampler able to operate up to 8 hours straight and compatible with multiple downstream analysis (NGS, qPCR, ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
AM-6 is a small online environmental monitoring system based on high-precision (ppb) gas sensors. The system provides a flexible sensor portfolio and modular design, which can simultaneously monitor various factors such as PM10, PM2 5, S02, N02, 03, CO, VOCs, temperature and humidity in the atmospheric environment, according to the monitoring needs. The system can expand various monitoring ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
OPSIS AQM systems measure multiple gases in real time over an open path. Using the DOAS (Differential Optical Absorption Spectroscopy) technique, the system is non-contact, with fast response. One system can be configured to monitor NO, NO2, SO2, O3, BTX, NH3, CO, CO2, HF, H2O, CH4, Hg, HCl, among other gaseous compounds. A basic system includes an analyser, an emitter/receiver set, and an ...
-
PremiumManufactured by ENVEAbased in FRANCE
The last generation of Cairsens micro-sensors for Particulate Matters (PM) monitoring operates without any influence from moisture in ambient air. They measure PM1 and PM10 concentrations, with increased precision for PM2.5. The Cairsens allows a year of continuous maintenance-free operation, even in highly polluted and humid atmospheres. Thanks to its robust and miniature design, it is fully ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
The zero gas generator provides clean and dry zero-level air. It is mainly applied to zero calibration of ambient air quality monitoring system or analyzer. It can also be used as flushing gas in permeation tube & furnace and oxidant gas for FID analyzer. Zero gas generator includes external oil-free air compressor, pressure and flow controller, water removal system. Based on adsorption, ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
The WT256 collects data from OPSIS analysers and data loggers and pushes the data via FileTransfer Protocoll (FTP) or via file copy to a temporary storage site on a TCP/IP based network, such as the Internet. The data is downloaded automatically from the network storage site to one or several users, utilizing a download service installed on the target computer. Once downloaded, further data ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati High Resolution ELPI+ (Electrical Low Pressure Impactor, HR-ELPI+) is an improved version of the widely used ELPI+ instrument. The High Resolution ELPI+ utilizes a data inversion algorithm that gives real-time particle size distribution in up to 500 size classes 6 nm – 10 μm. Other High Resolution ELPI+ features include wide particle sample concentration range, robust ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
AM-5 air quality continuous online automatic monitoring system can real-time monitor concentration changes of SO2, NOx, O3, CO, particulate matter(PM2.5,PM10) and other conventional pollution factor. It can be integrated with serosols, VOCs, NH3, and halide(HF/HCL) according to customer's needs. Combined with the five-parameter analyzer(temperature, humidity,wind direction, wind speed and air ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
Inhalable particle content is one of the most important indexes for measuring air quality. Combining years of experience in developing environment and safety monitoring instruments as well as the latest demand at home and abroad, our company has launched a new generation DPM-6000 pm 2.5 measurement device with high accuracy, reliability, stability and economy. Our PM monitor can measure PM10, ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you