Ammonia Control Applications available in Pennsylvania
-
Premium
Flue gas denitration on-line continuous monitoring solution
Nitrogen oxide (NOx) is one of the main sources of air pollution, not only it has significant influence on global warming, but also involved in the destruction of the ozone layer. Technical measures to control NOx emissions can be divided into two categories: one is so-called source control, the characteristic is by a variety of technical means, to control NOx generation in the process of combustion reaction (i.e., low NOx combustion technology). Another kind is the so-called tail control, the characteristic is ...
By Hangzhou Chunlai Technology CO., Ltd. based in Hangzhou, CHINA.
-
Premium
Gas analyzers and monitoring systems for Raw gas measurements
Raw gases are untreated flue gases that have not passed through an emissions control technology system like selective catalytic reduction (SCR) or selective non-catalytic reduction (SNCR). They are generally measured for the sakes of process control and warranty tracking. Typically only a few components are measured but fourier transform infrared spectroscopy FTIR technology allows the measurement of all ...
By Gasmet Technologies - a Nederman company based in Vantaa, FINLAND.
-
Premium
Portable NH3 Gas Analyzer for Testing NH3
Applications:Testing NH3 content data of denitrification outlet 50-120PPM and desulfurization outlet 70ppm of No.1 production line. Testing NH3 Content Data at Desulfurization Export of No.2 Production Line. ...
By Enviro Solutions Technology Co.,Ltd based in Wuhan, CHINA.
-
Energy reduction and coagulation process control for wastewater treatment industry
One of the biggest costs for water-water treatment is energy consumption; the cost of which is likely to escalate with increased demand. Ineffective process control may not only be costly but environmentally impacts though the inefficient use of an un-renewable resource. Furthermore, poor process control in one area may also impinge on neighbouring processes ultimately affecting effluent water ...
By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.
-
Measurement solution for high NH3 monitoring from wastewater
Protea was asked to supply a high level ammonia (NH3) measurement system for a waste water treatment plant. The reflux drums at the inlet to two ammonia stripping towers needed to be measured continuously. Protea designed a solution based around our Solus TDLAS analyser platform and a high level dilution system. The Solus analyser was configured for NH3 measurements in the range 0-500ppm. A dilution system incorporating special dilution probe and 19' control panel was installed before the analyser. This gave a ...
By Protea Limited based in Middlewich, UNITED KINGDOM.
-
Trace gas analyzers for ammonia in hydrocarbons applications
Introduction: Ammonia (NH3) is a well-known, widely spread air pollutant, which is present almost everywhere in low ppm/ppb concentrations. So this chemical can be found in various processes, where gases are the basic media, such as steam crackers producing gaseous hydrocarbons for further production steps like polymerization. Gases like this are for example Ethylene, Propylene and even so called cracker gas, which is mostly a mixture of above mentioned gases as well as Water and Hydrogen. The gases of interest ...
By IUT Technologies GmbH based in Berlin, GERMANY.
-
Environmental monitoring solution for fertilizer plants
Measurement of particulates, SO2, NOX, ammonia, fluorides and greenhouse gas emissions from the fertilizer industry requires careful selection of instruments. Ecotech offers a complete monitoring solution tailored to this ...
By Acoem Australasia based in Knoxfield, AUSTRALIA.
-
Applications and Air Pollutants Removed in the Metallurgical and Metal Finishing Industries
From Aluminum to Zinc in the Metals Industry, Bionomic offers field proven extensive line of equipment and systems for; capturing acid gases, ammonia and alkaline mists from metal cleaning, treatment, etching and finishing operations including chemical milling. Acid and NOx emissions from pickling, anodizing, chemical milling and precious metals dissolving operations. Systems for HCL recovery from pickling lines, special scrubbing equipment and chemistries for NOx removal. Zinc galvanizing and electrogalvanizing ...
By Bionomic Industries Inc based in Mahwah, NEW JERSEY (USA).
-
NH3 Monitoring in Air
NH3 (Ammonia) is a colorless gas with a distinctive pungent smell. Ammonia monitoring is essential in coal-fired power plants, where NH3 is used to reduce NOx emissions. The ammonia consumes all of the NOx, but its high concentration that is needed for these purposes also starts reacting with other things and in the process can clog up filters and cause premature failure of expensive SCR equipment and pre-heaters. Not to mention that these high levels create an irreparable damage to the ...
By Unisearch Associates Inc. based in Concord, ONTARIO (CANADA).
-
Nitric Acid Production Emissions Analysis
The Procal 2000 emissions analyser measures Oxides of Nitrogen for process control purposes, typically upstream of the N2O abatement reactor where typical pressures can be as high as 10 barg. The analyser can be supplied in both in situ and extractive configuration to suit customers’ ...
By Procal - Parker Hannifin Corp based in Peterborough, UNITED KINGDOM.
-
Gas detection & hazardous gas monitoring equipments for mechanical/chiller rooms
The release of refrigerant gases into the environment can be harmful to both the potential occupants of the space, as well as to the environment in general. Chlorofluorocarbons, commonly known as CFCs, which were formerly considered relatively safe, are now known to be a key contributor to the thinning of the ozone layer. These are gradually being replaced by more environmentally friendly refrigerants such as R134a. This however, does not lessen the need for leak detection. Regardless of their reduced impact on ...
By Armstrong Monitoring Corporation (AMC) based in Ottawa, ONTARIO (CANADA).
-
Ammonia measurement in raw wastewater applications
The action of the micro-organisms on organic and complex inorganic materials, leads to the production of ammonia. When ammonia is present in water at high enough levels, it will have detrimental effects on animal life. For this reasons ammonia in a wastewater plant might be monitored and removed at different points in the process: Inflow of the WWTP - Raw wastewater intake (Using our MS3500). In the aeration lanes. At the outflow of the clarifier. At the works ...
By Multisensor Systems Ltd. based in Cheadle, UNITED KINGDOM.
-
Plastic Random Packing for Air Stripping
Air Stripping is the transferring of volatile components of a liquid into an air stream. This process is used for the purification of groundwater and wastewater containing volatile compounds. Air Strippers are usually packed towers operated with a countercurrent flow of water and air. The design for Air Strippers involves a packed tower which includes plastic random packing it its design. The size of the packed tower and plastic random packing is determined by the air to water flow rates. Since many of the ...
By KemFlo Canada Inc based in Ontario, ONTARIO (CANADA).
-
Ammonia Sensors for Water Applications
In water, ammonia is a colorless, odorless substance that can only be detected by testing specifically for it. Unlike gaseous applications where high ammonia levels can sometimes be detected by its odor, aquatic applications require a test kit or sensor. Ammonia can and does accumulate in aquaculture systems causing mortalities, a decrease in fish production, and increased incidence of many ...
By Pacific Sentry LLC based in Redmond, WASHINGTON (USA).
-
Environmental Balance Device (EBD) Technology for Wastewater & GHG Treatment
Remediates over 95 % of Greenhouse Gas (GHG) and Ammonia Emissions emanating from wastewater tanks and lagoons on a continuous flow through ...
By Freytech Inc. based in Miami, FLORIDA (USA).
-
Carbon Dioxide Captured Technology for Agriculture Industry Sector
CCm Technologies innovative CO2 capture to fertiliser process transforms currently variable digestate outputs into predictable NPK organo mineral fertilisers. CCm Growth® fertilisers enhance the current nutrient benefits of digestate outputs to ensure effective delivery of nutrients to crops, whilst improving soil health, water retention and soil microorganism families. CCm's innovative process also significantly reduces the negative emerging environmental impacts of digestate to land practices, through the ...
By CCm Technologies Ltd based in Swindon, UNITED KINGDOM.
-
Sludge & Wastewater Treatment Equipment for Animal Husbandry Industry
Animal husbandry industry is an important part of China's agriculture and rural economy. The problem of environment pollution caused by the rapid development of animal husbandry industry is increasingly serious. Emissions of major pollutants from agriculture, life and industry sources were analyzed and summarized in the First National Survey Bulletin of Pollution Sources, which was released in February 2010. Among the agriculture sources, the COD and ammonia nitrogen emissions in animal husbandry industry were ...
By Shanghai Techase Environment Protection Co., Ltd based in CHINA.
-
Ammonia Sensors for Cold Storage Refrigeration
Ammonia refrigeration has been the backbone of the cold storage and food processing industries since the early 1900s. Many years ago, the food and beverage industry embraced ammonia refrigeration. The economic advantages alone made it the refrigerant of choice for cold storage facilities and food processing facilities as well as the dairy and meat-packing industries. Ammonia refrigeration is the most cost effective and energy efficient method of processing and storing frozen and refrigerated foods. Ammonia was ...
By Pacific Sentry LLC based in Redmond, WASHINGTON (USA).
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you