ammonia sensor Equipment available in Haiti

Available in Haiti| Near Haiti
30 Results found

We couldn't find any ammonia sensor equipment in Haiti

Here is a list of results available in Haiti

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Air & Climate ×

  • Subcategory: Ammonia Control ×

  • Keyword: ammonia sensor ×

  • Available in: Latin America ×

  • Available in: Haiti ×

Environmental Sensors - Model ZDL-800 - Ammonia Data Logging Meter

by Environmental Sensors Company     based in Boca Raton, FLORIDA (USA)

The ZDL-800 Ammonia data logging meter stores all of the exposure points for up to 5 logs (a log is created in the instrument's internal memory each time it is used). A log contains: date, time, number of exposure points, the interval between each point, and the actual exposure points. All of the log files can be easily uploaded to PC using ...

Environmental Sensors - Model Z-800 - Hand Held Ammonia Monitor Meter

by Environmental Sensors Company     based in Boca Raton, FLORIDA (USA)

Environmental Sensors Co.'s Ammonia Meter is a hand held instrument that measures ammonia concentration in a range of 0-100 ppm and a resolution of 0.1 ppm. The instrument makes it possible to monitor ammonia vapor in air. The instur

Environmental Sensors - Model Z-800XP - Portable Desktop Ammonia Monitor Meter

by Environmental Sensors Company     based in Boca Raton, FLORIDA (USA)

Environmental Sensors Co.'s Ammonia Meter is a portable desktop instrument that measures ammonia concentration in a range of 0-100 ppm and a resolution of 0.1 ppm. The instrument makes it possible to monitor ammonia vapor in air. The instrument has an LCD display giving concentrations in ppm every 10 seconds

Manning - Model EC-F2 - Ammonia Sensor

by Honeywell Analytics     based in Hegnau, SWITZERLAND

An Ammonia sensor that exhibits excellent accuracy and precision. The Manning EC-F2 Sensor is a three-wire, 4/20 mA sensor for Ammonia available in ranges of 0-100 ppm, 0-250 ppm, 0-500 ppm and 0-1,000 ppm.

Model 201040 - Ammonia Sensitive Sensor

by JUMO GmbH & Co. KG     based in Fulda, GERMANY

This probe is used to measure ammonia (NH3) in aqueous solutions. In an aqueous solution, ammonia is in a pH dependent balance with ammonia ions (NH4+-Ionen). If the NH4+ ions are transformed into ammonia by the addition of a caustic solution, the probe will record the resulting ammonia. NH4+ ions as such will not be recorded. The ammonia sensor ...

Ammonia Sensitive Sensor

by JUMO Instrument Co Ltd     based in Harlow, UNITED KINGDOM

This probe is used to measure ammonia (NH3) in aqueous solutions. In an aqueous solution, ammonia is in a pH dependent balance with ammonia ions (NH4+-Ionen). If the NH4+ ions are transformed into ammonia by the addition of a caustic solution, the probe will record the resulting ammonia. NH4+ ions as such will not be recorded.

Model 201040 - Ammonia Sensitive Sensor

by JUMO GmbH & Co. KG     based in Fulda, GERMANY

This probe is used to measure ammonia (NH3) in aqueous solutions. In an aqueous solution, ammonia is in a pH dependent balance with ammonia ions (NH4+-Ionen). If the NH4+ ions are transformed into ammonia by the addition of a caustic solution, the probe will record the resulting ammonia. NH4+ ions as such will not be recorded.

Sensoric - Model NH3 3E 100 - 3 Electrode Sensor

by City Technology Ltd     based in Portsmouth, UNITED KINGDOM

3 Electrode sensor with organic electrolyte; available in Mini, Classic, 4-Series and 7-Series formats.

Sensoric - Model NH3 3E100SE - 3 Electrode Sensor

by City Technology Ltd     based in Portsmouth, UNITED KINGDOM

3 Electrode sensor; available in Mini, Classic, 4-Series and 7-Series formats.

Model Mini-BA - Toxic Gas Portable Monitor

by PureAire Monitoring Systems, Inc     based in Lake Zurich, ILLINOIS (USA)

The Mini-BA is a Multi-gas portable gas detector. The heart of the system is a Smart Renewable electrochemical sensor cell. Sample is drawn through the system, detected and concentration information is displayed on an easy to read digital back lit LCD display. Also included are built in user selectable dual level alarm relays and 4-20mA output for ...

Model TX-FM/FMD/FN - Toxic Gas Transmitter

by PureAire Monitoring Systems, Inc     based in Lake Zurich, ILLINOIS (USA)

Bionics offers simple, compact, and yet complete toxic gas monitoring systems for chemical and petrochemical industries with the TX-FM-C/FMD-C/FN-C transmitter series. These transmitters are CSA-approved for intrinsic safety, for use in hazardous areas of Class I, Division 1, Group B, C and D when connected with the zener barier MTL788+ in a ...

Air Check Lite Smart Ammonia Monitor

by PureAire Monitoring Systems, Inc     based in Lake Zurich, ILLINOIS (USA)

The Air Check Lite Smart Ammonia Monitor is ideally suited for protecting your personnel, products, and plant from the hazards of ammonia leaks. The Air Check Lite is sensitive to detect the smallest leaks to provide early warning of low-level ammonia concentrations that can destroy your produce and dairy products.PureAire’s proprietary ...

Model STX-PA - Smart Gas Transmitter

by PureAire Monitoring Systems, Inc     based in Lake Zurich, ILLINOIS (USA)

The STX - [ * ] PA Smart Gas Transmitter is completely self-contained detection unit suitable for wide range of hazardous gases. The unit consists of a sensitive and specific electrochemical gas sensor and combination transmitter with extensive signal output capability. As a result, this fully integrated unit may be used as stand-alone gas ...

Model TX-KE/TX-KP - Toxic Gas Transmitter

by PureAire Monitoring Systems, Inc     based in Lake Zurich, ILLINOIS (USA)

The model TX - [ * ] KE Transmitter Series have been designed to continuously monitor corrosive gases such as HCl , HF, and NH3, even in hazardous areas. Because the flame arrester easily adsorbs these gases. It cannot be used in their detection. All sensors are easily replaced by virtue of their plug-in design. The sensor GS - [ * ] DP is ...

IC Controls - Model 647 - Submersible pH/ORP Sensor - Resistant to Sulfide, Cyanide and Ammonia

by IC Controls Ltd.     based in Orangeville, ONTARIO (CANADA)

This sensor is designed to survive in sulfides, cyanides and ammonia environments often found in Mines, Concentrators and Refineries. It is bigger and more rugged (shown in the left and right) than a conventional pH sensors (shown in the middle) and lasts 3 to 5 times longer. The patented 'solid polymer' pH reference design is used to give fast ...

IC Controls - Model 627 - Quick-Union pH/ORP Sensor - Resistant to Sulfide, Cyanide and Ammonia

by IC Controls Ltd.     based in Orangeville, ONTARIO (CANADA)

This sensor is designed to survive in sulfides, cyanides and ammonia environments often found in Mines, Concentrators and Refineries. It is bigger and more rugged than a conventional pH sensors and lasts 3 to 5 times longer. The patented 'solid polymer' pH reference design is used to give fast response and long life even with constantly ...

Model 0-100ppm/Optional: 0-1000ppm - Standard Ammonia NH3 Gas Measuring System

by Euro-Gas Management Services Ltd     based in Devon, UNITED KINGDOM

Ammonia NH3 Gas Measuring System, Standard: 0-100ppm NH3/Optional: 0-1000ppm NH3.

ScienceLine - Sensors for Ammonia, Sodium, Oxygen and Ion Selective Measurements

by SI Analytics - a Xylem brand     based in Mainz, GERMANY

Determination of ammonia, sodium, D.O. and processing of ion-selective measurements using SI Analytics sensors. The measurement of these parameters is processed for monitoring and control of plants up to examination of samples in quality control labs. Consequently, there is an extensive range of our ISE sonsors:

Armstrong-Monitoring - Model AMC VersaTox Series - Toxic Gas Sensor/Transmitter

by Armstrong Monitoring Corporation (AMC)     based in Ottawan, ONTARIO (CANADA)

The AMC VersaTox was designed to provide detection for a wide range of hazardous gases, including CO, NO2, ammonia, chlorine, and oxygen. The optional features on the AMC VersaTox include concentration readout, AC power, onboard alarm relay, and a duct mountable enclosure.

Model TQ122 - Catalytic Flammable Detector

by TQ Environmental Plc     based in Wakefield, UNITED KINGDOM

Suitable for most flammable gasses and vapours, including Petrol vapour, Hydrogen and Ammonia. The TQ122 range of three wire catalytic flammable sensors are ATEX approved EExd sensors for use in zone 1 and zone 2 hazardous areas. Their simple cost effective design allows them to be used in many applications. With a stainless steel construction and ...

Need help finding the right suppliers?

Let the XPRTs do the work for you