Air & Climate Applications available in Asia & Middle East
-
Premium
Compressed air and industrial gases solutions for textile industry
Energy savings solutions in the Textile industry. In almost all stages of the manufacturing process, compressed air is required in textile factories to create those beautiful and colourful fabrics. Especially in the cotton textile industry with air-jet looms, as well as in the polyester yarn industry, large volumes of air are required. The compressed air consumption in the textile industry is increasing due to modernisation of the production process. It is used in almost all machines for both operations as ...
By VPInstruments based in Delft, NETHERLANDS.
-
Premium
Water and Wastewater Treatment Systems for Textile
Textile industries are water-intensive and large amounts of water are used in textile manufacturing processes. Almost all dyes and chemicals are applied to textiles in water baths. Preparation steps such as desizing, washing, bleaching and mercerizing generally use aqueous systems. The importance of water in textiles is noted by the textile industries in India and China, their use of local water supply, and the mixing of untreated wastewater, which is composed of fats, oils, colors and other chemicals added in a ...
By Zetaş Kimya based in Ostim OSB/Yenimahalle, TURKEY.
-
Filter for Nylon Yarn Texturizing Emissions
PROCESS INFORMATION: In the production of Nylon filaments, polymer is melted and then pumped through a sand filter to a spinnerette. The filaments formed by the spinerette are cooled and solidified by air, before going to a humidifying chamber to stabilise the length of the spun polymer. The yarn filaments are then lubricated by a finishing agent and then stretched or ‘drawn’ to a desired diameter before being wound onto a ...
By Begg Cousland Envirotec Limited based in Glasgow, UNITED KINGDOM.
-
Evaporating and drying equipments for textile sludge applications
The main process units include: industrial park sewage treatment, pending sludge drying reduction, dry sludge Utilization of blending by thermal power plant, industrial park production heat supply, dryer heat source recycle and reuse as well as other process, which formed an industrial chain that has the characteristics of circular economy and can be replicated and promoted, known as Sludge Treatment Demonstration Base in FOSHAN city. This project was rated as "Excellent Case of Chinese Sludge Treatment and ...
By Guangzhou Shincci Energy Equipment Co., Ltd. based in Guangzhou, CHINA.
-
Applications and Air Pollutants Removed in the Textile Industry
Remove oil mists and blue haze from tenter frame ...
By Bionomic Industries Inc based in Mahwah, NEW JERSEY (USA).
-
Cleaners for Textiles industry
There are many cleaning applications in textile manufacturing and industrial textile laundering. In textile factories, manufacturing equipment, accessories, water recycling system filters, and wastewater filters must all be cleaned and maintained in order to keep the plant running efficiently. Minimizing downtime, by using the safest, most economical and environmentally friendly products that clean effectively, is critical. Returning filter system flux rates back to 100% is also important and can be accomplished ...
By International Products Corporation based in Burlington, NEW JERSEY (USA).
-
Air pollution control solution for textile/carpet industry
The textile industry typically produces an oil mist haze that creates a visible plume from the stack. The haze comes from the oils, surfactants, and chemicals used in the manufacturing process as well as from machinery oil. Many facilities employ a scrubber or an oxidizer to remove the ...
By CR Clean Air Group, LLC based in Parsippany, NEW JERSEY (USA).
-
Stack gas analysis for mineral wool plants
By Instrumatic aps based in Ry, DENMARK.
-
Industrial manufacturing solutions for the textile mills industry
The textile mills industry includes man-made fiber mills and wool woven fabric mills, carpet and rugs, yarn-spinning mills, non-woven fabric facilities, and tire cord and fabric facilities. These businesses require provide proven emission control solutions, including mist elimination and odor ...
By CECO Environmental based in Dallas, TEXAS (USA).
-
Filter for P.T.A. / C.T.A. Silo Vent Emissions in Polyester Fibre Production
PROCESS INFORMATION: In a plant making Terephthalic Acid (a constituent for the production of Polyester fibres) the silos or hoppers which are filled by mechanical or pneumatic conveying of the material. Raw material (C.T.A.) feed silos in the preparation section empty into the mixing process, and finished product (P.T.A.) silos are discharged to bagging stations. The filling and emptying of these silos generated vent gas which has to be treated before going to ...
By Begg Cousland Envirotec Limited based in Glasgow, UNITED KINGDOM.
-
Elemental Analysis for Woven & Nonwoven Fabrics by EDXRF / XRF
Fabrics fall into two broad categories wovens and nonwovens. A woven is a cloth formed by weaving. Wovens only stretch in the bias directions unless the threads are elastic. Nonwoven fabrics are broadly defined as sheet or web structures bonded together by entangling fiber or filaments created by mechanical, thermal, or chemical ...
By Applied Rigaku Technologies based in Cedar Park, TEXAS (USA).
-
Effluent filtration in textile industry
To separate solids from liquids, nonwoven or woven fabrics out of animal or vegetable fibers are used, and synthetic fibers are now in use since several decades. In cross-flow filtration the filtrate is recuperated transversely to flow direction through a porous wall layer. In classic filtration, a filter cake is built up on filter surface and this cake reduce the flow of filtrate which will depend of the cake permeability. Often it needs such a cake structure build-up in order to obtain a clear filtrate. The ...
By Bucher Unipektin AG based in Niederweningen, SWITZERLAND.
-
Spacer fabric for automotive textiles industry
3mesh spacer fabric guarantees perfect air distribution – even under pressure. In addition the perfect adjustment to every contour increases the comfort. Therefore 3mesh is used everywhere, where perfect comfort or soft touch is requested: in climatic and ventilated seats, seat covers, head liners, instrument and door panels as well as in composite constructions and invisible airbag ...
By Müller Textil GmbH based in Wiehl Drabenderhöhe, GERMANY.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you