Air & Climate Applications available in Bhutan
-
Premium
Hand-Held & Process Control Water Testing Instrument for Environmental Industry
Keeping the water in our lakes, rivers, and streams clean requires monitoring of water quality at many points as it gradually makes its way from its source to our oceans. Over the years ever increasing environmental concerns and regulations have heightened the need for increased diligence and tighter restrictions on wastewater quality. Control of water pollution was once concerned mainly with treating wastewater before it was discharged from a manufacturing facility into the nation's waterways. Today, in many ...
By Myron L Company based in Carlsbad, CALIFORNIA (USA).
-
Premium
Chemical water treatment for petrochemical
Petrochemical production plants suffer from repeated operational disruption caused by undesired fouling, corrosion and foam problems. The consequences are high operating costs and occupational safety concerns. Our dedicated treatment programs help to secure a failure-free operation of your plants and decisively contribute to a considerable reduction of the total operating ...
By Kurita Water Industries Ltd based in Tokyo, JAPAN.
-
Premium
Portable NH3 Gas Analyzer for Testing NH3
Applications:Testing NH3 content data of denitrification outlet 50-120PPM and desulfurization outlet 70ppm of No.1 production line. Testing NH3 Content Data at Desulfurization Export of No.2 Production Line. ...
By Enviro Solutions Technology Co.,Ltd based in Wuhan, CHINA.
-
Premium
Gas purification for the gas analysis industry
By Umwelttechnik MCZ GmbH based in Bad Nauheim, GERMANY.
-
Premium
AER-200 respirometer system for anaerobic applications sector
The CHALLENGE AER-200 Respirometer System consists of one or more biological reaction vessels, gas flow measuring cells, and a computer. The gas measuring base contains eight flow ceHs and associated interconnecting circuitry. As gas flows through each cell under the influence of a slight pressure caused by gas production in the reaction vessel, bubbles of a fixed volume are formed in the lower section of the cell. These bubbles in turn pass through a detection section where a counter is activated. Finally, the ...
By Challenge Technology based in Springdale, ARKANSAS (USA).
-
Premium
Erosion and dust control solutions for sub-base stabilizer sector
Envirotac line of polymers has been effectively used as a sub-base for roads, out-performing a standard rock base in performance and significantly in cost. Envirotac has been a preferred choice by many Departments of Transportation, replacing rock base and then having a cinder seal or chip seal sprayed ...
By Environmental Products & Applications, Inc. based in La Quinta, CALIFORNIA (USA).
-
Premium
Solutions for Sewage Treatment Plant
Sewage Water Treatment Plant Manufacturer, Supplier & Worldwide Exporter from India, Asia. Specialist in Package Type, Prefabricated Pre-engineered domestic Sewage Treatment Plants ranging from 10,000 LPD - 1,00,000 LPD with Sustainable ADAO ...
By Chemtronics Technologies (India) Pvt. Ltd. based in Mumbai, INDIA.
-
Premium
Low level measurement of VOCs and Terpenes close to the sea and the Landes Forest
It has been established that organic aerosol (OA) makes up for a major fraction of fine particulate matter in all region of the atmosphere. This fraction accounts approximately for half of the total PM2.5 dry mass.1,2 Primary OA is directly emitted in the troposphere from anthropological and natural sources whereas secondary OA (SOA) is formed in-situ in the atmosphere from the oxidation of biogenic or anthropogenic gas-phase precursors and subsequent partitioning of the less volatile products into the particle ...
By Chromatotec Group based in Val de Virvée, FRANCE.
-
Premium
Water and Wastewater Applications for Scraper Strainers Line
Summary of areas where an Acme scraper strainer can be installed in industrial marketplace and automatic strainer application. The market niche for ACME scraper-strainers and application for strainers is for screen openings larger than .003 inches or 75 microns and goes up to a high end of 6 inch or 150mm particles. At the finer straining end of the ACME line, there is an overlap with the upper end of backwash-type strainers of various designs. As particle sizes grow larger, backwash units fail to compete because ...
By Acme Engineering Prod. Ltd. based in Montreal, QUEBEC (CANADA).
-
Premium
XRF Spectrometers solutions for coating thickness analysis sector
Coating analysis can tell you a lot about the contents of material, item, etc. The simplest example: one can measure the content of a detail made from a certain alloy without its damage. Another way to apply the analysis is by measuring the jewelry to identify harmful or excessive impurities and gilding. Coating thickness analysis finds its way to be applied in almost every sphere of heavy and light industry, building, utility, ...
By Elvatech Ltd. based in Kyiv, UKRAINE.
-
Premium
Water quality monitoring for environmental industry
Maintaining the quality of natural waters provides numerous economic benefits by preventing severe deterioration of water resources that would require expensive treatment operations to protect public health and the environment. For instance, monitoring nitrates in surface waters can possibly prevent algal blooms from happening by facilitating the necessary steps to stop pollution sources from discharging nitrogen nutrients into the water ...
By Real Tech Inc. based in Whitby, ONTARIO (CANADA).
-
Premium
Gas analyzers for measuring acrylonitrile analysis in water
Monitoring of liquid matrices by Gas Chromatography using a simplified and enhanced headspace sampling system Chromatotec® presents a headspace sampling system designed to extract representative samples from the liquid phase. The vaporized sample can be preconcentrated using a trap to achieve quantification at very low concentration levels (ppb and/or ppm). Then, it is injected automatically and in continuous mode into the auto-GC analyzer. Speciation of sulfur compounds or VOCs is done with a MEDOR® ...
By Chromatotec Group based in Val de Virvée, FRANCE.
-
Premium
Thermoformed plastic solutions for cooling tower sector
Brentwood engineers reliable cooling tower components, including film fill media and drift eliminators, designed to provide long-lasting performance in industrial and commercial applications. Expertly engineered cooling tower components and solutions built on a foundation of comprehensive polymer knowledge, diverse worldwide manufacturing, and superior customer ...
By Brentwood Industries, Inc. based in Reading, PENNSYLVANIA (USA).
-
Premium
Outdoor Air Quality Monitoring for Smart Campus
Smart homes and campuses are common concepts nowadays. Therefore, Air quality and ambient atmosphere are among the key criteria in choosing a residential area. An average person spends 10-14 hours of his day at home. Hence, it is necessary to ensure that it is clean, dust-free, and healthy. With increased environmental pollution, people are more inclined towards being aware of its impact on their health. Increased urbanization and auto mobilizing have made it prominently essential to keep their outdoor activities ...
By Oizom Instruments Pvt. Ltd. based in Ahmedabad, INDIA.
-
Premium
Particle Measurement Instruments for Engine Emissions
Engine emission measurements are typically made in very different environments and conditions depending on the purpose of the measurement. Standardized and regulated particle emission measurements are made in test cell environments, PTI stations and on board a moving vehicles according the details described in the regulations and standards. For various research purposes, engine emissions can be measured in different conditions and even pre-DPF conditions. The requirements for the measurement instrument in these ...
By Dekati Ltd. based in Kangasala, FINLAND.
-
Premium
Environmental Data Monitoring Solutions for Industrial Hygiene
Industrial hygiene is the set of procedures established to help control environmental factors that could affect an employee’s health. Industrial hygiene involves identifying, evaluating and, when appropriate, eliminating biological, physical and chemical agents that can be found within the work place. ECOMESURE offers a broad range of instruments to measure the air quality in factories and/or industrial plants, following working conditions ...
By Ecomesure based in Saclay, FRANCE.
-
Premium
Air sampling & monitoring systems for environment industry
Researchers and Engineers utilize HI-Q air sampling equipment and systems for analyzing and investigating environments around the world. Data collected by HI-Q air sampling systems have provided critical information in the identification and prevention of pollution. HI-Q offers a line of high volume (TSP-Type) air sampling systems for data collection in perimeter monitoring & industrial emissions monitoring ...
By HI-Q Environmental Products Company, Inc. based in San Diego, CALIFORNIA (USA).
-
Premium
Water treatment chemicals solutions for automobile manufacturing industry
When automobiles are manufactured, each vehicle is painted by spraying a mist (paint mist) onto the car body and other parts. This process is referred to as the paint booth, and it ensures the beautiful finishing of car bodies and components and rust proofing. The excess paint that does not to cling to the car body and parts in the paint booth falls to the floor and is collected by water. This water is used as recycling water after removing the paint with water treatment ...
By Kurita Water Industries Ltd based in Tokyo, JAPAN.
-
Premium
Air pollution, emission and process monitoring systems for natural gas
Natural gas often contains mercury at concentrations that vary from below 1 to above 10000 µg/m³. Mercury is both toxic and potentially damaging: it can corrode or embrittle common gas plant components. Gas processors require safe, reliable and effective mercury removal process solutions in order to achieve requisite sales gas quality specifications and protect cryogenic equipment. Our monitoring solutions are used to detect and precisely measure mercury levels in natural gas at various locations within ...
By ENVEA based in Poissy, FRANCE.
-
Premium
Corrosion-resistant materials for the chemical & petrochemical processing industry
Sauereisen’s diverse line of corrosion-resistant materials stands up to the extreme temperatures, pH levels and physical abuse that are commonly found in chemical and petrochemical facilities. Whether these facilities need protection for secondary containment, flooring, immersion or flue gas environments, Sauereisen has an inclusive product offering to provide the necessary protection and security. Our products have stood up to the challenges in acid plants, refineries, steel pickling lines and precious ...
By Sauereisen Inc. based in Pittsburgh, PENNSYLVANIA (USA).
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you