Air & Climate Applications available in Greece
-
Premium
Monitors, gas analyzers solutions for understanding ISO 21501-4
Determination of particle size distribution—Single particle light interaction methods. ISO 14644-1:2015 introduces the need for particle counters calibrated to ISO 21501-4. The calibration methods assure data accuracy and repeatability. The methods outlined in ISO 14644 and ISO 21501-4 represent an important step in more accurate evaluations of clean room contamination and improved process control. ISO 21501, Determination of particle size distribution—Single particle light interaction methods, ...
By Particle Measuring Systems (PMS) based in Boulder, COLORADO (USA).
-
Premium
Continuous Emissions Monitoring System (CEMS) for Determination of a Gas
Continuous emission monitoring system (CEMS) is the total equipment necessary for the determination of a gas or particulate matter concentration or emission rate using pollutant analyzer measurements and a conversion equation, graph, or computer program to produce results in units of the applicable emission and transmit the information to the Continuous Emission Monitoring system. ...
By Enviro Solutions Technology Co.,Ltd based in Wuhan, CHINA.
-
Premium
Radon Monitoring for Radon Calibration
Radon monitoring for Radon calibration labs, research and expertise, specific applications (seismic survey, and so ...
By Bertin Technologies based in Montigny-le-Bretonneux, FRANCE.
-
Premium
Smoke generator device for oil mist generation
Concept’s OMG is used by many of the worlds leading specialists in Oil Mist Detection including Specs, Dr Horn , Honeywell, Kidde, Valcom, Daihatsu, Schaller and ...
By Concept Smoke Systems | Concept Engineering Ltd. based in Maidenhead, UNITED KINGDOM.
-
Premium
Monitors, gas analyzers solutions for ISO 14644-1/2: 2015 insights & solutions
ISO 14644-1:2015 continues to pose challenges to cleanroom managers and manufacturers. Here we provide several sources of information to help everyone from those new to this ISO regulation to veterans in the field. Our team of regulatory experts have put together a package of information so you can easily understand the requirements and what you need to do to meet them. Get a summary of ISO 14644-1:2015 by reading the paper below or watching the recorded webinar at the right. We also have FAQs and a paper to learn ...
By Particle Measuring Systems (PMS) based in Boulder, COLORADO (USA).
-
Premium
Multiple-beams Wind Profile Lidar
The WindMast WP350 is a wind profile lidar with wavelength of 1.55μm, based on the principle of four-beam velocimetry. The wind speed information was retrieved, and vertical and horizontal profiles were calculated via power spectrum estimation of sampled echo signals through the measurement of the atmospheric wind ...
By Qingdao Leice Transient Technology Co., Ltd. based in Qingdao, CHINA.
-
Premium
Activated carbons solutions for flue gas & mercury sector
In many industrialized nations it is common practice to use incineration methods for waste disposal. There are also ways to recover energy from the process. However, operating an incinerator requires strict adherence to environmental regulations. Hazardous, clinical and waste to energy incinerators can benefit from our EcoSorb range of activated carbon. Specially designed to adsorb unwelcome airborne compounds from flue ...
By Jacobi Group based in Kalmar, SWEDEN.
-
Premium
Visual inspection solutions for the duct HVAC inspections
Duct (HVAC) cleaning is an important part of maintaining good air quality in any building, if ducts are not being cleaned properly, air polluted by dust and other fine particles that can be harmful, will be circulated throughout the system. The best way to ensure ducts are being cleaned completely is to visually inspect them, this can now be accomplished using HVAC inspection cameras. These CCTV cameras are composed of a digital inspection camera attached to a push rod to enable the camera to access all parts of ...
By Fiberscope.net by Medit Inc. based in Winnipeg, MANITOBA (CANADA).
-
Premium
Temperature and gas sensing solutions products for thermal processing
Equip yourself with various operating voltages and advanced control. From silicon wafer processing to steel-billet production, thermal processing, including general heat treatment, is used in everything. And to transform your materials into reliable, high-quality, finished products, you need precise ...
By Advanced Energy Industries, Inc. based in Denver, COLORADO (USA).
-
Premium
Gas purification for small laboratories
By Umwelttechnik MCZ GmbH based in Bad Nauheim, GERMANY.
-
Premium
Boroscope for Remote Visual Inspections in NDT
Boroscopes (aka Borescopes) are useful and valuable NDT tools in any industry where remote visual inspections are essential. Traditional, non-video techniques for tracking an object, do not work as well within the environment a boroscope typically encounters. Using these devices you can get clear visual access to many hard-to-reach places without a complete tear-down of the components. There are two main types of boroscopes - rigid and flexible. You can get flexible ones with two way and four way tip articulation, ...
By Fiberscope.net by Medit Inc. based in Winnipeg, MANITOBA (CANADA).
-
Premium
Mercury monitoring for mercury flux measurement
The Tekran 2537 has been used in numerous published studies to measure the deposition or evasion of mercury from natural or contaminated surfaces (i.e. flux measurements). It is anticipated that many mercury flux measurements will be needed in the future to assess the impact of climate change on mercury cycling in the environment. There are two basic ways to do mercury flux measurements. First, the dynamic flux chamber method utilizes a custom enclosure, with controlled air flow, to measure the inlet and outlet ...
By Tekran Instruments Corporation based in Toronto, ONTARIO (CANADA).
-
Premium
Process monitoring solutions for special applications processes
OPSIS is a world-leading supplier of gas monitoring systems for various special applications in the process control sector. The OPSIS process monitoring systems have been tested and approved by a range of international authorities, and has proven to have the best performance and longest calibration intervals. We specialise in the design and supply of high accuracy, low maintenance, cross-duct, non-extractive process control systems. We also provide additional products and services, including dust and flow ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Flue gas heavy metals on-line continuous monitoring solutions
According to US EPA IO - 3.3 standard method of heavy metals, flue gas heavy metals analyzer uses XRF nondestructive testing technology and flue gas automatic enrichment technology to realize the accurate measurement of flue gas heavy metals such as waste incineration plants, cement plants, thermal power plants, ...
By Hangzhou Chunlai Technology CO., Ltd. based in Hangzhou, CHINA.
-
Premium
Gas monitoring for industrial processing applications
Temperature measurements play critical roles in a number of diverse industrial processes. AMETEK Land provides expert solutions to support product quality, process efficiency, safety and emissions control. Our industry-leading non-contact measurement instruments deliver essential temperature data for industry sectors including metals, non-wovens, paper and plastics. We also supply effective emissions monitors and conveyor belt scanners. AMETEK Land has more than 70 years’ experience in providing ...
By AMETEK Land Instruments International Ltd based in Dronfield, UNITED KINGDOM.
-
Premium
Premium gas generators and calibration solutions for inductively coupled plasma (ICP) sector
LNI Swissgas supplies gas generators for ICP ...
By LNI Swissgas based in Versoix, SWITZERLAND.
-
Premium
Gas analyzers for odorization injection and control
Mercaptans or THT are added to natural gas to make it smell and to make it detectable by the human nose (odorization process and odorization control in pipes). energyMEDOR ppm: 30 years’ experience. The compounds usually used to odorize natural gas vary from one country to another but are usually: Ter Buthyl Mercaptan (TBM) TetraHydroTiophene (THT) MethylEthylSulfide (MES) Analyze H2S and mercaptans concentration in natural gas ...
By Chromatotec Group based in Val de Virvée, FRANCE.
-
Premium
Metallurgical industry online monitoring solutions
Poorly controlled the concentration of gases such as CO, CO2, CH4 in the metallurgical industry cause poisoning, explosions and other accidents, and pose a serious threat to the safety in production. So it is essential to check the content of these gases for energy conservation, increase productivity, reduce energy consumption and protect the safety of life and product. The company's gas analysis technology can accurately and reliably measure various industrial gas content, to provide a ...
By Hangzhou Chunlai Technology CO., Ltd. based in Hangzhou, CHINA.
-
Premium
Chemiluminescense based analyzer for industrial sector
Focuses on medium NOx, NOx-related and multigas-concentrations up to 5’000 ppm where flexibility is a central requirement. Parameters included are NO, NO2, NOx, NH3, NOx-amines, O2 and CO2. Typical supported applications are industrial emission monitoring and gas manufacturing control. ...
By ECO Physics AG based in Duernten, SWITZERLAND.
-
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you