Air & Climate Applications available in Marshall Islands

  • Premium

    Noise modeling for noise consulting

    Noise planning that supports many governments and engineering associations worldwide. 

    By SoundPLAN International LLC based in Shelton, WASHINGTON (USA).

  • Premium

    Mass transfer and chemical separations applications for natural gas, chemical and pharmaceutical plants

    De-ethanizer. De-propanizer. De-butanizer. Acid Gas Capture. Air Separation. Chlor Alkali Plants. Ammonia Plants. Fertilizer Plants. Ethylene Oxide Production. Styrene and Ethylbenzene Production. Ethanol Separation. Methanol Separation. LNG Recondenser. Titanium Dioxide Production.

    By Raschig USA Inc. based in Arlington, TEXAS (USA).

  • Premium

    Analysis of Methylimidazoles in Caramel Colored Carbonated Beverages

    Caramel colorings are used as additives in a broad range of food and beverage products to impart a desired color, but have no nutritional or preservative function. Recently, the potential hazard to humans of ammonia- and ammonia-sulfite-process caramel colorings was raised, because they contain the by-product 4-methylimidazole, which is a potential carcinogen.1 The methylimidazole compounds are difficult to analyze due to their polar nature and low molecular weight. Traditional reversed phase techniques are...

    By Merck KGaA, Darmstadt, Germany based in Darmstadt, GERMANY.

  • Premium

    Analysis of Isocyanates Using the ASSET™ EZ4-NCO Dry Sampler

    Isocyanates are used as a raw material to produce a number of products . Personal exposure can occur while the products made with isocyanates are being applied, or when the materials are removed by grinding or thermal degradation. Workers who are exposed to these compounds are at risk for respiratory disorders and asthma. The highly reactive nature of the isocyanate compounds and the low occupational exposure limits put high demands on both sampling and analytical techniques for monitoring of isocyanates in...

    By Merck KGaA, Darmstadt, Germany based in Darmstadt, GERMANY.

  • Premium

    Air pollution control for the paint and paint spray industry

    In addition to tightened government regulations, paint manufacturers and paint booth owners face several unique challenges when controlling their emissions. These challenges include airflow reduction, fugitive emissions, particulate control and reducing operating costs.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Air pollution control for the rubber curing industry

    One-time, on-site final destruction of particulates. This is the key benefit gained from an Anguil solution to the emissions generated by the rubber curing process. Other advantages of an Anguil solution include the elimination of visible blue haze, guaranteed destruction efficiency compliance, and the elimination of costly mechanical filtration media and the lingering liability issue associated with filter disposal.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    radiello™ Passive Sampler as a Tool for the Measurement of Atmospheric Ammonia Concentrations and Dry Deposition

    The radiello ammonia sampler impregnated with phosphoric acid represents a low-cost, reliable and simple tool for assessing the atmospheric deposition of ammonia at parts per billion (ppb) concentration levels.

    By Merck KGaA, Darmstadt, Germany based in Darmstadt, GERMANY.

  • Premium

    Air pollution control for the printing, laminating & converting industry

    Achieving cost effective local regulatory compliance in the printing and converting industry requires a complete understanding of both regulatory standards and the printing process. Through experience, Anguil has developed unparalleled expertise in meeting your unique requirements. We understand the effects of water versus solvent-based inks on the line, elimination of odors and toxic fumes from...

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Capabilities of the Adsorbent Tube Injector System (ATIS™)

    The Adsorbent Tube Injector System (ATIS) was developed at Supelco® by R&D Scientists, as a tool to assist in our comprehensive adsorbent research for thermal desorption tubes. The ATIS provides an efficient means of transferring calibration standards in either the gas or liquid phase onto the adsorbent packed tubes. The ATIS employs the technique of flash vaporization to vaporize the sample in a continuous flow of inert gas; the inert gas carries the sample to the tube. The sample pathway of the ATIS is construct...

    By Merck KGaA, Darmstadt, Germany based in Darmstadt, GERMANY.

  • Premium

    Mass transfer and chemical separations applications for environmental plants

    Flue Gas Scrubbing, Waste Water Treatment, Drinking Water Treatment.

    By Raschig USA Inc. based in Arlington, TEXAS (USA).

  • Premium

    Air pollution control for the composite & carbon fiber industry

    Anguil is intimately familiar with emission capture, control and compliance hurdles that composite and carbon fiber producers face. We specifically address the needs of our carbon fiber customers with proprietary oxidizer designs for furnace and oven emissions. Our systems are recognized for energy efficient operation and destruction capabilities by the U.S. Federal Government at their Oak Ridge National Laboratories (ORNL). Anguil continues to help producers drive down energy consumption and emission output...

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Odor control for remediation

    Helping others clean up the earth by clearing up brownfield remediation odors. Helping others clean up the earth by clearing up brownfield remediation odors. Brownfield remediation consists of removing large amounts of soil that have been saturated with tar, oil or other contaminating substances. Not only dangerous to handle, the disturbed soil is often infused with very unpleasant and in some cases potentially nauseous odors.

    By OMI Industries (OMI) based in Long Grove, ILLINOIS (USA).

  • Premium

    Environmental solutions for the iron and steel industry

    The evaporative gas cooling and conditioning system uses a finely atomized water spray to cool EAF, BOF off-gases from over 2,400°F (1,315°C) to as low as 240°F (115°C), protecting ductwork and downstream air pollution control equipment from high temperature and sparks, while providing rapid cooling for dioxin and furan control. By optimizing humidity levels, it helps electrostatic precipitators because the water spray completely evaporates while cooling the gases. There is no free water and no...

    By Dürr Megtec LLC based in De Pere, WISCONSIN (USA).

  • Premium

    Environmental solutions for the refining and petrochemical industry

    Refining and Petrochemical Safety, Reliability and Environmental Sustainability.

    By Dürr Megtec LLC based in De Pere, WISCONSIN (USA).

  • Premium

    Environmental solutions for the composites & carbon fiber industry

    Dürr MEGTEC provides roll-to-roll drying, curing and thermal air handling systems for coating and laminating applications. Whether you need a small, value-priced roll support dryer, a custom-configured air flotation dryer or a complete coating line for a specialized application, Dürr MEGTEC has the products and services to meet your requirements. Our technical application and design engineers work with your process specialists or OEM suppliers to design systems that will provide reliable, high...

    By Dürr Megtec LLC based in De Pere, WISCONSIN (USA).

  • Premium

    Odor control for wastewater treatment processes

    Natural odor control for wastewater treatment processes. Industrial and municipal wastewater treatment generates odors that can be strong, persistent, and a nuisance to employees, residents, businesses, and industries located near the wastewater treatment plant.

    By OMI Industries (OMI) based in Long Grove, ILLINOIS (USA).

  • Premium

    Odors control for solid waste

    A solid solution for solid waste odors. All areas of solid waste handling are, by nature, odorous affairs. Municipal sludge, municipal solid waste, landfills, composting and co-composting facilities all generate odors that can be offensive to workers and the community at large. The process is a complex one, with multiple drops, collections, transfers and sortings of recyclable and non-recyclable material. Combustible materials are then incinerated for energy production.

    By OMI Industries (OMI) based in Long Grove, ILLINOIS (USA).

  • Premium

    Odor control for liquid waste

    Vaporize Odors Associated With Liquid Waste Processing: Liquid waste, such as fats, oils and grease (F.O.G.) can emit unpleasant odors, which become even more pronounced in various stages of processing. Malodorous F.O.G. from restaurants are often transported by truck to F.O.G. filtering facilities and then to plants where they are processed into useable byproducts.

    By OMI Industries (OMI) based in Long Grove, ILLINOIS (USA).

  • Premium

    Odor control for metal casting

    Use Ecosorb products to remove foundry smells naturally. Ecosorb odor control products by OMI Industries are extremely effective at breaking down and eliminating the many odorous gases produced by the metalcasting process. They chemically convert foul and potentially harmful gases into non-odorous byproducts. Within the metalcasting industry, Ecosorb products are effective on amines, sulfur dioxide, phenols, formaldehyde, ammonia, partially burnt hydrocarbons solvent odors and more.

    By OMI Industries (OMI) based in Long Grove, ILLINOIS (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you