Air & Climate Applications available in Syria
-
Premium
Air Quality Monitoring Stations
Opsis provides complete AQM stations, used for street-level, urban trend and background applications. The monitoring systems have been approved by the German TĂśV and the U.S. EPA among ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Process water treatment
Process water covers the wide range of boiler feed water, cooling water for heat exchangers or engine, chemicals dilution, etc. It should typically have a conductivity ranging from 0,1 to 50 uS/cm, with little to no hardness to avoid scaling in heating system. Oxygen and carbon dioxide should be removed to prevent corrosion. Depending on your application, the water quality requirements can vary: Boiler feed water characteristic. Cooling water quality. Tap water or fresh groundwater are the most widely used source ...
By Lenntech Water Treatment based in Delfgauw, NETHERLANDS.
-
Premium
Mercury monitoring for measuring mercury content in hair
Measurement of mercury content in hair is a convenient technique to estimate dietary exposure without having to handle tissues or bodily fluids. As the mercury present in hair is comprised of different mercury species, full speciation of the compounds is needed for complete understanding. Environment Canada published a technique where treating a basic digestion with Cd2+ in the presence of cysteine allowed analysis of inorganic mercury and total mercury using a Tekran 2600 System. Methyl mercury was then ...
By Tekran Instruments Corporation based in Toronto, ONTARIO (CANADA).
-
Premium
Gas monitoring instruments and systems for greenhouse gases from Soil sector
Gasmet manufactures portable and powerful gas analyzers for greenhouse gas flux measurements. All key gas compounds can be measured in seconds: N2O, CH4, CO2, H2O, CO and ...
By Gasmet Technologies - a Nederman company based in Vantaa, FINLAND.
-
Premium
Gas monitoring instruments and systems for compressed breathing air
Compressed breathing air is subject to strict limits of harmful contaminants defined in European standard EN 12021 and various defence standards such as DEF STAN 68-284 issue 3. The testing interval of breathing air compressors and associated equipment is 3 months and gases tested include carbon monoxide, carbon dioxide and oil vapour defined as hexane and heavier hydrocarbons. EN 12021 covers underwater applications including self-contained open circuit compressed gas breathing (SCUBA) and compressed gas line ...
By Gasmet Technologies - a Nederman company based in Vantaa, FINLAND.
-
Premium
Chemiluminescense based analyzer for automotive, aviation, marine, and combustive engines sector
Focuses on high NOx, NOx-related and multigas-concentrations up to 10’000 ppm. Parameters included are NO, NO2, NOx, NH3, NOx-amines, O2 and CO2. The applications are characterized by demanding sample gas conditions, such as in automotive, aviation, naval, or combustive engine emissions, as well as in catalyst production. ...
By ECO Physics AG based in Duernten, SWITZERLAND.
-
Premium
Analysis of H2S, Mercaptans and/or THT in natural gas with energyMEDOR
Context & Challenges How to analyze H2S, mercaptans and/or THT for detecting the odor of the gas with the ability to have total organic sulfur calculation in a metering ...
By Chromatotec Group based in Val de Virvée, FRANCE.
-
Premium
Air Quality Monitoring and Modelling for Airports
With the rapid increase in Aviation, it’s important to ensure Air Quality levels at Airports and their vicinity is regulated. Hence, by installing a network of real-time air quality monitoring systems, we can identify the environmental health of the airports. Also, through the generated data, the Airport authorities can derive air action plans. The data helps determine the impact of aircraft emissions on the airport staff and passengers. Consequently, the collected air quality data needs to identify carbon ...
By Oizom Instruments Pvt. Ltd. based in Ahmedabad, INDIA.
-
Premium
Ultrasonic sensors for tank level measurement applications
Ultrasonic sensors mount at the top of the tank facing down toward the liquid surface. By measuring the distance to the liquid, and knowing the tank height and geometry, the level or volume is calculated. Tanks can have a nitrogen blanket or be open top. The sensors typically thread into a tank fitting, and can connect to other equipment by analog or serial data means. They can also identify full, empty or reorder levels. A wireless connection can also be provided to access local tank data without installing ...
By Senix Corporation based in Hinesburg, VERMONT (USA).
-
Premium
Continuous emissions monitoring solutions for mining & smelting
OPSIS non-contact monitoring solutions, based on either DOAS or TDL techniques, are very well suited for applications in the mining and smelting Industries, as the flue gas conditions often involve high temperatures and high dust ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Water treatment solutions for building industry
Genesis Water Technologies partners with leading property developers, facilities management companies and international construction/project management companies involved in the development of commercial, industrial and multi-family residential housing to integrate advanced grey water reuse, and disinfection solutions ...
By Genesis Water Technologies, Inc. based in Maitland, FLORIDA (USA).
-
Premium
Gas purification for small laboratories
By Umwelttechnik MCZ GmbH based in Bad Nauheim, GERMANY.
-
Premium
Air Quality Monitoring for Communities & Environmental Justice groups
Every community deserves healthy air quality. Exposure to polluted air can lead to short-term and long-term health issues — particularly for those living in low-income and communities of color that are disproportionately impacted by air pollution from sources such as major highways, industrial operations, and ports with diesel truck ...
By Clarity Movement Co. based in Berkeley, CALIFORNIA (USA).
-
Premium
Steel & industrial refractories solutions for laser measurement systems sector
Our laser profile measurement systems are used for non-contact scanning of the refractory lining in metallurgic reaction and transport vessels, like converters, EAFs, torpedo ladles and steel casting ladles, as well as in open die forging shops. The measurement values detected by laser scanners permit early and effective patching of defective locations and increase the lifetime of the refractory lining. Refractory costs are reduced at the same time operating safety is increased. The product assortment ranges from ...
By CETCO based in New York, NEW YORK (USA).
-
Premium
Solutions for Cigarette Smoke Control Removal
Cigarette Smoke Odor removal is very challenging, because it produced toxics like ammonia, carbon monoxide & high level of tar vapour. These are some of the impurities among the dozens of toxic from Cigarette smoke. These are different components and cannot be eliminated with air purifiers & air cleaners. Tobacco smoke just permeates into the entire room, the chemical vapours cling to the carpet, upholstery, drapes, clothing and Cracks. The microscopic cigarette smoke odor residue will remain on the walls, ...
By Chemtronics Technologies (India) Pvt. Ltd. based in Mumbai, INDIA.
-
Premium
HEPA filter emission monitoring for pharmaceutical powder processing
In the pharmaceutical industry, finished powders are often transferred from the mixing area to tableting machines via vacuum transfer systems. Transfer lines incorporate a high efficiency HEPA filter after the vacuum pump to prevent exposure to potentially harmful dust in the workplace. HEPA filters can become less effective due to operational wear and tear or through possible mishandling during maintenance work. An effective solution to remotely monitor the HEPA filter performance can enable proactive filter ...
By ENVEA based in Poissy, FRANCE.
-
Premium
Measurements Solutions for Automotive
The automotive industry is dependent on the adoption of advanced manufacturing technologies to enable the production of high quality, precision components that are crucial to ensuring performance. The global push for higher efficiency standards, tighter emission controls and a reduction in the allowable cabin noise have prompted a shift to smoother surfaces and complementary metrology methods. The industry is also witnessing the transition from off-line quality control inspection to on-line or in-line ...
By Zygo Corporation - AMETEK, Inc based in Middlefield, CONNECTICUT (USA).
-
Premium
Product Recovery Solutions for Milling and Drying Processes
Efficient recovery of active pharmaceutical ingredients (APIs), chemical substances and food powders after drying applications such as spray and fluid bed drying is frequently a problem. The same problem occurs in many milling and micronization ...
By Advanced Cyclone Systems, S. A. (ACS) based in Porto, PORTUGAL.
-
Premium
Air pollution control for the metal decorating industry
Maintain Production Schedules and Profit Margins. Metal decorators and packagers rely heavily on uptime to maintain profitability. Anguil’s engineering expertise and flexible solutions guarantee compliance and optimized performance so your plant can focus on ...
By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).
-
Premium
Air pollution, emission and process monitoring systems for odor detection
Our range of gas monitors and Cairsens micro-sensors are able to measure 24h/day and accurately identify odors in applications such as WWTP, recycling, pulp and paper manufacturing, sewerage treatment facilities, refineries, sargassum algae decomposition, etc. Odors can thus be immediately linked to your operations, identify system leaks, and act quickly to reduce them for the comfort and the health of all, employees and residents. This proactive approach provides tangible elements in reducing complaints bringing ...
By ENVEA based in Poissy, FRANCE.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you