Air & Climate Applications available in Uzbekistan
-
Premium
Cement materials for High-Temperature filters/catalysts industry
High-Temperature Filters/Catalysts; Adhesive applications. Bonds high-temperature filter media into stainless steel or aluminum housing. May Bonds stacked components or internal components nested within a filter ...
By Sauereisen Inc. based in Pittsburgh, PENNSYLVANIA (USA).
-
Premium
Gas purification for the gas analysis industry
By Umwelttechnik MCZ GmbH based in Bad Nauheim, GERMANY.
-
Premium
AER-200 respirometer system for anaerobic applications sector
The CHALLENGE AER-200 Respirometer System consists of one or more biological reaction vessels, gas flow measuring cells, and a computer. The gas measuring base contains eight flow ceHs and associated interconnecting circuitry. As gas flows through each cell under the influence of a slight pressure caused by gas production in the reaction vessel, bubbles of a fixed volume are formed in the lower section of the cell. These bubbles in turn pass through a detection section where a counter is activated. Finally, the ...
By Challenge Technology based in Springdale, ARKANSAS (USA).
-
Premium
Activated carbons solutions for home water filters industry
As standards of living continue to increase in developed nations, consumers demand higher quality drinking water from their taps. Activated carbon is the time tested solution to meet these challenges. Jacobi offers a full range of products for water treatment from the AquaSorb™ line especially designed for use in home water filtration ...
By Jacobi Group based in Kalmar, SWEDEN.
-
Premium
Emission control solutions for general dedusting sector
Several industries face problems from dust released during product transportation or processing. This is the case of the Textile, Wood Processing, Mining, Ink Manufacturing and other industries. Frequently, in order to maintain an appropriate level of particles suspended in the air (usually measured in Parts per Million by Volume), dust is extracted with air in strategically positioned caption points and typically recovered in cyclones or in bag filters. When filters have to be used to increase capture efficiency, ...
By Advanced Cyclone Systems, S. A. (ACS) based in Porto, PORTUGAL.
-
Premium
Low level measurement of VOCs and Terpenes close to the sea and the Landes Forest
It has been established that organic aerosol (OA) makes up for a major fraction of fine particulate matter in all region of the atmosphere. This fraction accounts approximately for half of the total PM2.5 dry mass.1,2 Primary OA is directly emitted in the troposphere from anthropological and natural sources whereas secondary OA (SOA) is formed in-situ in the atmosphere from the oxidation of biogenic or anthropogenic gas-phase precursors and subsequent partitioning of the less volatile products into the particle ...
By Chromatotec Group based in Val de Virvée, FRANCE.
-
Premium
Energy Savings Solutions for Oxygen Industry
Measure and monitor your oxygen flow, pressure, temperature, and dew point, with VPInstruments oxygen sensors. Get insight into your oxygen consumption and optimize your system, monitor your consumption and allocate flow over your distribution network. VPInstruments’ sensors for oxygen are highly reliable and easy-to-use. We help manufacturers of oxygen generators, technical gas suppliers, oxygen infrastructure (piping, installation) companies, and end customers to respond to current increased ...
By VPInstruments based in Delft, NETHERLANDS.
-
Premium
Ozone generators for laundry application
In recent years ozone laundry technology has proven itself to be an effective tool in helping to reduce water usage and energy consumption while also reducing wash and dry times, ensuring the absence of microorganisms, and improving the quality and useful life of laundered products. There are economic advantages to an ozone system as well as microbiological and environmental benefits. Currently in the United States there are over 2,000 ozone laundry systems in place and as many as 3,000 more in the United Kingdom ...
By Absolute Ozone® based in Edmonton, ALBERTA (CANADA).
-
Premium
Air sampling & monitoring systems for fire & police service
Fire service and law enforcement workers frequently face unknown chemical and biological hazards. Internal emergency response personnel must assess the situation before committing a rescue or control team. Today, the Threat of biological agents is real. Accurate situation assessment is of paramount importance when responding to an emergency or control situation. HI-Q’s emergency response air sampling kits have offered Fire and Police emergency response teams a way of recognizing, determining and identifying ...
By HI-Q Environmental Products Company, Inc. based in San Diego, CALIFORNIA (USA).
-
Premium
Gas analyzers for measuring acrylonitrile analysis in water
Monitoring of liquid matrices by Gas Chromatography using a simplified and enhanced headspace sampling system Chromatotec® presents a headspace sampling system designed to extract representative samples from the liquid phase. The vaporized sample can be preconcentrated using a trap to achieve quantification at very low concentration levels (ppb and/or ppm). Then, it is injected automatically and in continuous mode into the auto-GC analyzer. Speciation of sulfur compounds or VOCs is done with a MEDOR® ...
By Chromatotec Group based in Val de Virvée, FRANCE.
-
Premium
Erosion and dust control solutions for construction site dust control sector
To any dust challenge, Envirotac line of polymers is the solution. It works great on mass graded areas, finished pads, stock piles, roads, and even fire access areas. Envirotac line of polymers are used constantly to control fugitive dust on construction sites. When applied, water is no longer needed to control and prevent PM10. Envirotac forms a durable layer of protection over the surface of the treated ...
By Environmental Products & Applications, Inc. based in La Quinta, CALIFORNIA (USA).
-
Premium
Air sampling & monitoring systems for environment industry
Researchers and Engineers utilize HI-Q air sampling equipment and systems for analyzing and investigating environments around the world. Data collected by HI-Q air sampling systems have provided critical information in the identification and prevention of pollution. HI-Q offers a line of high volume (TSP-Type) air sampling systems for data collection in perimeter monitoring & industrial emissions monitoring ...
By HI-Q Environmental Products Company, Inc. based in San Diego, CALIFORNIA (USA).
-
Premium
Analysis of VOC compounds in water by Purge & Trap or dynamic headspace
Context & Challenges Volatile organic compounds (VOC) can be dissolved in water. Sometimes water is polluted and to study contamination of VOC in finished drinking water, VOC must be measured. Chromatotec® Solutions Chromatotec® has developed a specific system for the measurement of VOC in water: a Purge & Trap system, the airmoPURGE. The analyzer is coupled with a degasing system allowing the extraction of dissolved gases. The complete system is based on: - 502.2 method from US EPA – ...
By Chromatotec Group based in Val de Virvée, FRANCE.
-
Premium
Outdoor Air Quality Monitoring for Smart Campus
Smart homes and campuses are common concepts nowadays. Therefore, Air quality and ambient atmosphere are among the key criteria in choosing a residential area. An average person spends 10-14 hours of his day at home. Hence, it is necessary to ensure that it is clean, dust-free, and healthy. With increased environmental pollution, people are more inclined towards being aware of its impact on their health. Increased urbanization and auto mobilizing have made it prominently essential to keep their outdoor activities ...
By Oizom Instruments Pvt. Ltd. based in Ahmedabad, INDIA.
-
Premium
Flowing Waters - Irrigation & Drainage Systems solutions for Irrigation Channel Flow Measurement
Application: Trapezoid concrete channel 9.5 x 2.5 m (w x h). Partially filled. Very high volumes and velocities from time to ...
By NIVUS GmbH based in Eppingen, GERMANY.
-
Premium
Particle Measurement Instruments for Engine Emissions
Engine emission measurements are typically made in very different environments and conditions depending on the purpose of the measurement. Standardized and regulated particle emission measurements are made in test cell environments, PTI stations and on board a moving vehicles according the details described in the regulations and standards. For various research purposes, engine emissions can be measured in different conditions and even pre-DPF conditions. The requirements for the measurement instrument in these ...
By Dekati Ltd. based in Kangasala, FINLAND.
-
Premium
Measurement of water for the oil industry
By Analytik Jena - an EndressHauser Company based in Jena, GERMANY.
-
Premium
Mercury monitoring for on-site remediation
Fugitive emissions can be a health concern during removal and disposal of mercury-contaminated material at remediation sites. Thus, remediation projects either indoors or outdoors often require on-site, real-time mercury air monitoring with a Tekran 2537. This assures permitted levels are not exceeded during waste processing and human exposure levels are below government regulated toxicity thresholds. Often multiple sites must be monitored continuously. The Tekran 1115 Multi-Port Sampler is the ideal tool for ...
By Tekran Instruments Corporation based in Toronto, ONTARIO (CANADA).
-
Premium
Water treatment chemicals solutions for automobile manufacturing industry
When automobiles are manufactured, each vehicle is painted by spraying a mist (paint mist) onto the car body and other parts. This process is referred to as the paint booth, and it ensures the beautiful finishing of car bodies and components and rust proofing. The excess paint that does not to cling to the car body and parts in the paint booth falls to the floor and is collected by water. This water is used as recycling water after removing the paint with water treatment ...
By Kurita Water Industries Ltd based in Tokyo, JAPAN.
-
Premium
Air pollution, emission and process monitoring systems for natural gas
Natural gas often contains mercury at concentrations that vary from below 1 to above 10000 µg/m³. Mercury is both toxic and potentially damaging: it can corrode or embrittle common gas plant components. Gas processors require safe, reliable and effective mercury removal process solutions in order to achieve requisite sales gas quality specifications and protect cryogenic equipment. Our monitoring solutions are used to detect and precisely measure mercury levels in natural gas at various locations within ...
By ENVEA based in Poissy, FRANCE.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you