Air & Climate Applications
-
Premium
Process water treatment
Process water covers the wide range of boiler feed water, cooling water for heat exchangers or engine, chemicals dilution, etc. It should typically have a conductivity ranging from 0,1 to 50 uS/cm, with little to no hardness to avoid scaling in heating system. Oxygen and carbon dioxide should be removed to prevent corrosion. Depending on your application, the water quality requirements can vary: Boiler feed water characteristic. Cooling water quality. Tap water or fresh groundwater are the most widely used source ...
By Lenntech Water Treatment based in Delfgauw, NETHERLANDS.
-
Premium
Smoke generator device for clean room solutions
The correct functioning of HEPA filters is normally tested at the time of installation, as well as part of the routine maintenance programme. It is normally recommended that HEPA filters are checked at 14 month intervals or less, or immediately after filter changing. Where high efficiency filters are fitted, it is vital that the filter housing/sealing device does not allow particulate material to pass and thereby compromise the clean room environment that is being served. Testing is necessary since HEPA filters ...
By Concept Smoke Systems | Concept Engineering Ltd. based in Maidenhead, UNITED KINGDOM.
-
Premium
Compressed air and industrial gases solutions for manufacturing of materials sector
Ensure and improve production capacity using a flow meter in the industry of materials manufaturing. A flow meter show you where, when and how much how you can optimize and thus save ...
By VPInstruments based in Delft, NETHERLANDS.
-
Premium
Disposable formwork for cold storage sector
Iglu'® creates a ventilated cavity under the floor of cold rooms, avoiding deformation and cracks. ...
By Daliform Group Srl based in Gorgo al Monticano (TV), ITALY.
-
Premium
Indoor air quality treatment solutions for casinos and gaming sector
Casinos are invaded by offensive Odors such as: Smoke, Alcohol, Cooking, Spill, Body, Bacterial, Fungal, Mold, & mildew, etc. Casinos compete to attract clients and provide pleasant environments where customers will be comfortable staying for extended periods of time. Unfortunately, most ventilation systems only recirculate room air and remove large particulate matter such as dirt, dust, and lint. Unpleasant restaurant and bar odours are left free to recirculate in the air you breathe and could increase in ...
By Chemtronics Technologies (India) Pvt. Ltd. based in Mumbai, INDIA.
-
Premium
Gas analyzers for plant protection and process optimization
Problem: Analyze total chlorines as well as organic compounds with a quick time response. Motive: Protects and authorizes the incinerator functioning : VOC limits the ability to incinerate Chlorine and fluorides limits the ability to incinerate to protect the incinerator Analytical Solution: VOC analyzed from the FID GC The total Halogenated compounds Installation of a reactor to convert the chlorines and the fluorides into HCl and HF Halogenated compounds analysis with our instrument Hx analyzer ...
By Chromatotec Group based in Val de Virvée, FRANCE.
-
Premium
Incinerator solutions for the marine waste sector
Storage of waste while at sea can take up valuable space. Using one of our on-board marine incinerators you can free up this space for more profitable activities or to simply provide more ...
By Inciner8 Limited based in Southport, UNITED KINGDOM.
-
Premium
Track-Etched Polymer Membrane Filters for Templating
Synthesis of nano- and of micro-sized objects. Applications in batteries, catalysts, ...
By it4ip S.A. based in Louvain-la-Neuve, BELGIUM.
-
Premium
Gas monitoring instruments and systems for nitric acid process
Modern production method of nitric acid production may lead to generation of several different gaseous emission components, such as nitrogen oxides (NOx), ammonia NH3 and nitrous oxide N2O. Nitrogen monoxide is an intermediate gaseous product in manufacturing of nitric acid HNO3. NO is formed in a catalytic reaction between ammonia and molecular oxygen O2. But undesirable side reactions may result in formation of nitrogen dioxide NO2 and nitrous oxide N2O. The NO and NO2 emissions can be reduced by use of ...
By Gasmet Technologies - a Nederman company based in Vantaa, FINLAND.
-
Premium
Industrial filtration solutions for the landfill sector
Industrial filtration solutions for the landfill ...
By Hilliard Corporation based in Elmira, NEW YORK (USA).
-
Premium
Direct AA Mercury determination in cosmetics
INTRODUCTION High mercury concentration can be found in such cosmetic products as skin lightening soaps and creams, makeup cleansing products, and mascara. Mercury in cosmetics exists as inorganic and organic compounds. Inorganic mercury (e.g. ammoniated mercury) is used in skin lightening soaps and creams. Organic mercury compounds, such as thiomersal, are used as cosmetic preservatives in makeup cleansing products and ...
By Lumex Instruments based in Mission, BRITISH COLUMBIA (CANADA).
-
Premium
Activated carbons solutions for automotive industry
In today’s competitive market, vehicle manufacturers face a variety of challenges with respect to the capture of organic compounds. Increasingly stringent emissions regulations require efficient removal of volatile organic compounds (VOCs) from the vehicle, mileage standards impact the size and weight of vehicles (thus impacting the design of air filters used in the vehicle), and consumers continue to demand improved driving experiences (driven in part by air quality within the vehicle cabin). Auto makers ...
By Jacobi Group based in Kalmar, SWEDEN.
-
Premium
Indoor air quality treatment solutions for retail shopping malls industry
People favour to spend their time in shopping malls. Good indoor air quality is, therefore, very essential to shoppers. Unlike the popular perception that an enclosed air conditioned zone is free of all pollutants and dirt, it has been discovered that indoor air is more polluted than the outdoor air and is amongst the top five environmental risks as listed by the EPA. These malls do not offer the occupants any control over their environment, i.e. they cannot open windows if the store feels stuffy and ...
By Chemtronics Technologies (India) Pvt. Ltd. based in Mumbai, INDIA.
-
Stack emission testing for tire manufacturing industries
By Custom Stack Analysis, LLC. based in Alliance, OHIO (USA).
-
Dust and oil collection for the ceramics industry
By ProVent, LLC based in Harbor Springs, MICHIGAN (USA).
-
High performance separation system for alkylation unit
The key aspects of an alkylation unit pertain to the amount of acid that needs to be made-up on a continuing ...
By Pentair Filtration Solutions, LLC based in Conroe, TEXAS (USA).
-
Air cleaning system for the government buildings
Dynamic Air Quality Solutions has been part of many high profile Government projects including the Securities and Exchange Commission headquarters and the anthrax clean-up effort at the Brentwood Post Office in Washington D.C. Since 2005, Dynamic Air Cleaners have been installed in over 200 government projects in the U.S. and Canada, including state & local and military sectors. ...
By Dynamic Air Quality Solutions based in Princeton, NEW JERSEY (USA).
-
Air cleaning system for the museums
Indoor air quality has become as important as temperature and humidity when it comes to the preservation of valuable collections in modern metropolitan galleries, archives, libraries and museums. From the San Francisco Museum of Modern Art to Philadelphia’s Barnes Foundation, designers have used air cleaning technology from Dynamic Air Quality Solutions to provide clean, contaminant-free air to some of the most valuable collections in the world. Coast to coast and around the world, Dynamic has successfully ...
By Dynamic Air Quality Solutions based in Princeton, NEW JERSEY (USA).
-
VOC control for process coating and laminating
VOC control for process coating and ...
By Catalytic Combustion Corporation (CCC) based in Bloomer, WISCONSIN (USA).
-
Temperature measurement and control devices for OEM industry
TTEC custom designs Thermocouples & RTD's for OEM Applications. These sensors range from small diameter, fast response sensors to rugged heavy duty process assemblies.Manufactured in small or large quantities, these sensors are precisely manufactured to meet or exceed specifications. TTEC OEM product solutions include high accuracy, fast response RTD's used in Analytical Instrumentation, High Temperature Platinum Rhodium Double Tube Assemblies for Combustion Based Equipment and oil sealed, spring loaded RTD's ...
By Thermocouple Technology, LLC (TTEC) based in Quakertown, PENNSYLVANIA (USA).
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you