Only show results in Connecticut? Ok

Air & Climate Applications

  • Premium

    Recycling equipments for shredder light fraction (SLF) recycling

    Dismantled ELVs (End of Life Vehicles) are sold to shredder operators and are reduced to fist-size pieces by large rotating hammer mills. The Shredder Light Fraction (SLF) is removed from the stream by suction, the intensity of which determines the amount and composition of the SLF. SLF consists essentially of plastics/rubber (~60%), Glass/sand i.e. mineral substances (~15%), Textiles/leather/wood (~10%), Paint dust/rust (~10%) and Residual metals (~5%). Other names for SLF are ASR (Automobile Shredder Residue)...

    By Eldan Recycling A/S based in Faaborg, DENMARK.

  • Premium

    Air pollution control solution for incineration sector

    Waste incineration, such as sewage sludge, municipal solid waste and hazardous waste incineration are areas under particular scrutiny by regulators because of their multiple toxic pollutants. The Clean Air Group, LLC has been selected by several hazardous waste facilities to design and build integrated multiple pollutant air pollution control systems to replace existing scrubber systems to meet the new Maximum Achievable Control Technology (MACT) standards. In several instances, only a scrubber was required, in...

    By CR Clean Air Group, LLC based in Parsippany, NEW JERSEY (USA).

  • Premium

    Waste incineration line continuous monitoring solutions

    In accordance with "Standard for pollution control on the municipal solid waste incineration" (draft), all existing and new the municipal solid waste incinerators need automatic continuous on-line monitoring of main ingredients in incineration flue gas. Monitoring projects should include at least HCl, SO2, NOx, soot, etc., but also need to detect CO and HF in some higher environmental requirements situations.

    By Hangzhou Zetian Technology Co., Ltd. based in Hangzhou, CHINA.

  • Premium

    Shredding technology for rubber tire recycling sector

    As we known, the black pollution- tires cover all over the world and it is growing at one billion waste tire every year. It does damage to the environment. The traditional disposal method of waste tire is to burn or pile up outdoor for a long time, but whether burning or piling up, waste tire would take up a lot of land and cause new pollution during waste tires. So we need to recycle waste tires. Rubber tire recycling machine can crush waste rubber into chip. The finial rubber granules can be made into rubber...

    By Harden Machinery Ltd. based in Zhongshan City, CHINA.

  • Premium

    Gas analyzers and monitoring systems for waste incineration sector

    Waste-to-energy (WtE) or energy-from-waste (EfW) through incineration of waste is on the one hand an effective way of producing electricity and heat, while on the other hand it is disposing of possibly hazardous or unrecyclable waste. Its purpose is not to compete with waste recycling, reuse and prevention, but to complement them. After all, incineration not only reduces the amount of hazardous waste, but may also generate energy through the gases released in the process. Read about our solutions for waste-to-energ...

    By Gasmet Technologies Oy based in Vantaa, FINLAND.

  • Premium

    Ice blasting technology for cleaning contractors

    Currently have a cleaning company, or looking to start your own? Position your business with the power of using wet or dry ice to meet any tough challenge that comes your way. As many companies offer ‘just’ dry ice blasting. Make your company’s services stand apart by offering wet ice blasting as well. With the cost and performance advantages regular ice can offer; your business will have an edge in the marketplace.

    By Coulson Ice Blast based in Port Alberni, BRITISH COLUMBIA (CANADA).

  • Premium

    Special plants for recycling of electronic waste (WEEE)

    Proper disposal of electronic waste (WEEE) and of waste in the R4 category, i.e. waste such as electrical and electronic equipment, allows the recovery of a large number of precious metals and components.

    By Forrec srl based in Santa Giustina in Colle, ITALY.

  • Premium

    Air pollution, emission and process monitoring systems for incineration

    ENVEA’s long association with the Incineration Industry includes supporting Process Operators to meet environmental obligations and the requirement for high performance instrumentation with quality assurance features for compliance reporting. In addition to the importance of regulatory compliance, the control and treatment of emissions from Incineration processes represents a significant proportion of overall costs, therefore, quality data from emissions and process monitoring provides valuable feedback on...

    By ENVEA based in Poissy, FRANCE.

  • Premium

    Machine condition monitoring for marine

    Overview Machine condition monitoring based on oil analysis has become an important, if not mandatory, maintenance practice by the marine industry. An effective oil analysis program will keep important assets such as engines, gearboxes, hydraulic systems, turbines, compressors, generators and any other oil-wetted machinery in operation by reducing unexpected failures and costly unscheduled down time.

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Premium

    Special plants for recycling of refrigerators

    FORREC produces systems for the correct treatment of WEEE in the R1 category: refrigerators and electronic cooling appliances in general. WEEE waste in the R1 category may prove to be hazardous if it is not treated with due care. The danger of such appliances is due to the presence of refrigerants that are harmful to the atmosphere (CFC, R21, R22 and R600).

    By Forrec srl based in Santa Giustina in Colle, ITALY.

  • Premium

    Special plants for recycling of toners

    Printer consumables and empty toner cartridges cannot be grouped with municipal solid waste but require special treatment for recycling. FORREC has designed an exclusive plant that provides specific processing for this type of waste. The system developed and produced by Forrec consists in a treatment with a four-shaft shredder that provides a reduction to less than 40mm allowing the subsequent separation of iron, plastic and non-ferrous materials. A dust suction system is combined with a shredding system.

    By Forrec srl based in Santa Giustina in Colle, ITALY.

  • Waste Treatments Plants for Stabilising

    This method is used to process and stabilise the organic fraction of municipal waste, thus reducing greenhouse gas emissions and leachate drain. Not only does this relieve pressure on the environment, the stabilised waste is also easier to landfill.

    By Biodegma GmbH based in Ludwigsburg, GERMANY.

  • Intelligent Monitoring of Recyclables

    Whether you’re a private collector of glass and paper, or a local authority or municipality, you are challenged to ensure that your bins and containers are collected at the right time. Not too early so that resources are wasted but also not too late when unsightly over-filling can occur. You have an obligation to your clients and citizens to provide the best recycling collection service possible. And without a complete overview of operations, this is a near impossible and expensive task. SmartBin’s...

    By SmartBin based in Swords, IRELAND.

  • Carbonisation for Upcycling

    Biomass contains much more than just the energy of the future. Selected biogenic residues (SRC wood, silage waste, extract residues, paper fibre sludge…) can be refined into new, valuable products such as biochar, charcoal feed or activated carbon by carbonisation (charring). But even if the material can no longer be refined, you benefit from the carbonisation in the PYREG process.

    By Pyreg GmbH based in Dörth, GERMANY.

  • Communal trucks, truck maintenance units, multifuncional machines, minivans, pickup trucks & utility vehicles for high pressure washing & intensifiers applications

    Since electricity in many cases is rather unavailable or does not supply sufficient power to allow efficient use of the various pressure water techniques, combustion engine driven pressure washers require quite some space, are heavy, difficult to handle in one man operation and additional machinery need additional space, you can use the HWB model. It is sufficient to install a small hydraulic system or a power pack in pick-up-trucks or trucks and the cars become a proper complete versatile tool.

    By Neron Pumps based in Ranica, ITALY.

  • Gas phase reduction technology solutions for vehicle tires conversion sector

    The Natural Energy Solution uses a proprietary, patented process called Gas Phase Reduction (”GPR”). This is a highly effective, non-incineration method that converts all organic waste within the tire. The GPR technology converts all aspects of the tires to either a methane product gas or the steel and carbon black components, which are 100% recovered for recycling. The technology operates within a closed system with no stack or chimney.

    By Natural Energy Systems Inc. (NES) based in Burlington, ONTARIO (CANADA).

  • Scrap recycling plants for fridge recycling

    URT develops, builds and sells plants for cooling equipment disposal. As the world leader in the field of cooling device recycling, we are engineering technically sophisticated plants corresponding to the new standard EN 50625. The CENELEC standard EN 50625, which is the new version of the EN 50574, is requiring high demands on the disposal of old refrigerators. This means, end-of-life appliances have to be treated and recycled separately according insulating materials. With the URT plants for cooling equipment...

    By URT Umwelt- und Recyclingtechnik GmbH based in Karlstadt, GERMANY.

  • Odor control for municipal and government

    Eliminating industrial odors naturally is our civic duty. To handle the odor control needs of municipal and government agencies, OMI Industries has created MUNI odor neutralizing product. Similar in many ways to its siblings in the Ecosorb products line, Muni odor control product uses Van Der Waals forces to chemically react with malodor molecules to eliminate odors combined with a natural formulation that makes it safe to work with. What’s more, the Muni product is surprisingly economical to use. It was...

    By OMI Industries (OMI) based in Long Grove, ILLINOIS (USA).

  • Scrap recycling plants for toner cartridges

    For the recycling of printers, scanners and copiers URT also provides technical solutions and is therefore focusing the toner cartridge recycling. During toner cartridge recycling, cartridges are shredded and separated in toner powder, metal and plastic components. Since the toner powder poses a high risk of explosion, we have developed a multi-stage safety concept to ensure the safe separation of the powder from the remaining fractions. This includes explosion suppression using an inert powder, as well as other...

    By URT Umwelt- und Recyclingtechnik GmbH based in Karlstadt, GERMANY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you