Air & Climate Applications in Australasia

  • Premium

    Mercury analysis for researching institutions

    By Analytik Jena AG Distributor in Lane Cove, AUSTRALIA.

  • Premium

    Mercury analysis for the paper industry

    By Analytik Jena AG Distributor in Lane Cove, AUSTRALIA.

  • Premium

    Air pollution control for the coating industry

    Whether you are flow coating miniblinds, magnetic tape, aluminum cans, coils, wire or paper, Anguil`s 35 years of pollution control experience has provided unique insight into the wide variety of applications in the coating industry. Anguil`s experience leads directly to savings for our customers. Determining your solution begins by quantifying the problem with a thorough assessment of your emissions. Utilizing proven principles of design engineering, your system will evolve to incorporate air volume reduction...

    By Anguil Environmental Systems, Inc. Distributor in Unanderra, AUSTRALIA.

  • Premium

    Environmental solutions for the environmental/emissions sector

    Environmental control technologies for the environmental/emissions sector.

    By Dürr MEGTEC, LLC Office in Glen Waverley, AUSTRALIA.

  • Premium

    Air pollution control for the metal decorating industry

    Environmental regulations for air pollution cotrol at metal decorating and packaging facilities usually address can makers, base coil coaters, or metal parts and packaging manufacturers. Metal Decorating can be classified as any process where metal is formed painted, or coated. Metal Packaging is generally considered processes involved in the production of aluminum cans, light metal containers, closures and components.

    By Anguil Environmental Systems, Inc. Distributor in Unanderra, AUSTRALIA.

  • Premium

    Air pollution control for the remediation industry

    The remediation division of Anguil Environmental Systems (formerly known as Global Technologies) is focused on treating emissions and water contaminants extracted from below the earths` surface. Formed shortly after the 1990 Clean Air Act targeted emissions associated with the extraction of polluted compounds from contaminated sites, Global subsurface remediation equipment has been successfully applied on contaminated sites in North and South America, Europe, Asia and Australia.

    By Anguil Environmental Systems, Inc. Distributor in Unanderra, AUSTRALIA.

  • Premium

    Odor control for pulp and paper

    Pulp and paper production with none of the odor. Pulp and paper manufacturing is a notorious source of nuisance odors, often stemming from hydrogen sulfide, mercaptans and sulfur dioxide. Fortunately, Ecosorb products offer a natural and effective solution to neutralize these odors and all others associated with the paper and pulp industry. Ecosorb odor eliminators have been used repeatedly by large paper and pulp manufacturers to control odors around on-site black liquor lagoons, primary clarification ponds and...

    By OMI Industries (OMI) Distributor in Abbotsford, AUSTRALIA.

  • Premium

    Environmental solutions for the cement manufacturing industry

    Evaporative gas cooling and conditioning systems use specially engineered atomizing nozzles that introduce a controlled amount of finely atomized water into the hot gas stream to reduce and/or maintain gas temperature. The water evaporates completely while absorbing heat from the gases, which results in free-flowing dust, zero liquid discharge, and minimal or no problems with scale buildup on the walls.

    By Dürr MEGTEC, LLC Office in Glen Waverley, AUSTRALIA.

  • Premium

    Oxidation Reduction Potential (ORP)/Redox

    Oxidation Reduction Potential or Redox is the activity or strength of oxidizers and reducers in relation to their concentration. Oxidizers accept electrons, reducers lose electrons. Examples of oxidizers are: chlorine, hydrogen peroxide, bromine, ozone, and chlorine dioxide. Examples of reducers are sodium sulfite, sodium bisulfate and hydrogen sulfide. Like acidity and alkalinity, the increase of one is at the expense of the other.

    By Myron L Company Distributor in NEW ZEALAND.

  • Premium

    Air pollution control for the ethanol/biodesel industry

    Renewable energy plants are expanding and developing at a significant rate in North America and throughout the world. In the United States, the Clean Air Act for reformulated gasoline (RFG) mandates a 2wt.% oxygen requirement, driving the demand for more production. Ethanol is the most viable additive because it is a clean-burning fuel produced from renewable, domestic biomass sources. However, the production of these fuels can result in unacceptable levels of volatile organic compounds (VOCs), carbon monoxide...

    By Anguil Environmental Systems, Inc. Distributor in Unanderra, AUSTRALIA.

  • Premium

    Air pollution control for the automotive industry

    Anguil`s engineering expertise has led to numerous successful air pollution control and emission control installations in the automotive manufacturing industry. From painting vehicles to engine test stations and tire manufacturing, we have supplied oxidizers and heat recovery systems to both tier 1 and tier 2 automotive plants.

    By Anguil Environmental Systems, Inc. Distributor in Unanderra, AUSTRALIA.

  • Premium

    VOC and HAP Abatement

    As is the case for many industrial manufacturing processes, emissions are best destroyed through the use of thermal and catalytic oxidation technologies. Volatile Organic Compounds (VOCs) and Hazardous Air Pollutants (HAPs) are destroyed through the use of high temperature combustion with direct heat recovery. The harmful air pollutants are converted to heat, water vapor and carbon dioxide, creating a destruction efficiency greater than 99%.

    By Anguil Environmental Systems, Inc. Distributor in Unanderra, AUSTRALIA.

  • Premium

    Environmental solutions for the automotive - industrial painting and other finishing applications

    Reliability and uptime are essential. Uninterrupted production - all are essential requirements in painting and finishing applications. Just-in-time manufacturing demands uninterrupted production and smooth pressure control that eliminates pressure fluctuations in the painting and finishing process. Dürr Megtec has supplied many systems to tier 1 and tier 2 automotive plants where high volume, low concentration exhaust streams are treated economically and effectively, yet adaptable to changing finishing...

    By Dürr MEGTEC, LLC Office in Glen Waverley, AUSTRALIA.

  • Premium

    Odor control for composite

    A Single Solution To Manage Composite Odors: Many resins used in the composite industry emit styrene vapors which are considered hazardous in high concentrations and whose odor is an unpleasant nuisance. This gas is categorized as a volatile organic compound (VOC) and listed by the United States Environmental Protection Agency (US EPA) as a Hazardous Air Pollutant (HAP). Styrene is considered highly reactive in the atmosphere and may contribute to smog formation and the production of secondary air pollutants.

    By OMI Industries (OMI) Distributor in Abbotsford, AUSTRALIA.

  • Premium

    Boiler Water Testing / Cooling Tower Water Testing

    Boilers and cooling towers share two major water related problems: deposits and corrosion. As steam is generated by a boiler or water evaporating from a cooling tower, dissolved minerals are left behind, increasing the concentration of these minerals. Additional minerals are introduced via the water added to makeup the water lost to steam/evaporation. Eventually, the minerals reach a level (or cycle) of concentration that will cause either loss of efficiency due to scale or damage from corrosion. This level can...

    By Myron L Company Distributor in NEW ZEALAND.

  • Premium

    Environmental solutions for the chemical processing industry

    Applying the right emission control equipment for the chemical and pharmaceutical industry requires a thorough knowledge and understanding of the process and system requirements, combined with the ability to provide custom solutions.

    By Dürr MEGTEC, LLC Office in Glen Waverley, AUSTRALIA.

  • Premium

    Deionized Water Testing

    Years ago, high purity water was used only in limited applications. Today, deionized (Dl) water has become an essential ingredient in hundreds of applications including: medical, laboratory, pharmaceutical, cosmetics, electronics manufacturing, food processing, plating, countless industrial processes, and even the final rinse at the local car wash.

    By Myron L Company Distributor in NEW ZEALAND.

  • Premium

    Environmental solutions for the waste incineration industry

    Multi-pollutant abatement systems. Different Categories of Waste Incineration: From a regulatory standpoint, the industry is divided into a number of categories: commercial/industrial solid waste incinerators (CISWI), municipal waste combustors (MWC), hospital/medical/infectious waste incinerators (HMIWI), hazardous waste combustors (HWC), sewage sludge incinerators (SSI), and other solid waste incinerators (OSWI). While each sub-category is subject to differing environmental regulations, all can benefit from...

    By Dürr MEGTEC, LLC Office in Glen Waverley, AUSTRALIA.

  • Premium

    Air pollution control for the natural gas processing industry

    The natural gas industry has seen a significant increase in activity with the discovery of new shales located throughout the world. The development of advance drilling technologies allow for extraction of gases deeper in the earth, revolutionizing the industry while creating a new demand for air and water pollution control technologies.

    By Anguil Environmental Systems, Inc. Distributor in Unanderra, AUSTRALIA.

  • Premium

    Metal Sludge Plants for Oil and Metal Industry

    Grinding-swarf from the metal processing industry may contain metal alloys, stainless-steel and high-alloyed steel, all of which are ideal input-materials VacuDry unit. The absence of oxygen in the VacuDry process prevents any changes in the chemical structure of the oil, emulsions or metals during the treatment. The output material can later be sold at high prices.

    By econ industries services GmbH Office in West Essendon, AUSTRALIA.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you