Air & Climate Applications in Australasia

  • Premium

    Decentralized Wastewater Treatment for Worker Encampments

    With Aspiralâ„¢ Smart Packaged plants, installations can meet even the strictest effluent regulations and foster good relations with neighboring communities The oil and natural gas extraction industry is booming, and where there's a boom, there's a workforce that needs shelter. Typically, impromptu housing springs up to meet the need, but often, these so-called "man camps" overstress the sanitary infrastructure of nearby towns or go without wastewater treatment entirely, endangering human health and the environment....

    By Fluence Corporation Office in Carlton, AUSTRALIA.

  • Premium

    VOCs Fugitive emissions detection

    An oil refinery or petroleum refinery is an industrial process plant where crude oil is processed and refined into more useful petroleum products, such as naphtha, gasoline, diesel fuel, asphalt base, heating oil, kerosene, etc,. Oil refineries are typically large, sprawling industrial complexes with extensive piping running throughout, carrying streams of fluids between large chemical processing units. The refining process releases a number of different chemicals into the atmosphere mostly Hydrocarbons which...

    By EyeCGas -OGI by OPGAL Distributor in Hope Island, AUSTRALIA.

  • Premium

    Drill Cuttings Plants For Oil and Gas Industry

    Common drilling procedures for oil and gas, used widely around the world, produce a consistently increasing amount drill cuttings containing oil. In some cases, drill cuttings even contain other hazardous components such as mercury or NORM (Natural occurring Radioactive Material), requiring special attention. Treatment of drill cuttings is therefore beneficial from both an environmental and an economic standpoint, allowing valuable drilling oil to be recovered, and ensuring environmentally sound disposal of the...

    By econ industries services GmbH Office in West Essendon, AUSTRALIA.

  • Premium

    Methane gas leak detection

    Methane emissions from oil and natural gas systems is primarily the result of normal operations or system disruptions. These hazardous emissions can be cost-effectively reduced by upgrading technologies or equipment, and by improving operations. However, in order to do so, one must be able to detect and identify the existence of a fugitive gas leak. Opgal`s EyeCGas Optical Gas Imaging camera, for gas leak detection, is one of the most advanced cameras used to detect leaks. Thus, it becomes a required tool in...

    By EyeCGas -OGI by OPGAL Distributor in Hope Island, AUSTRALIA.

  • Premium

    Mercury Waste Plants for Oil & Gas Industry

    Mercury-contaminated wastes are a major challenge for many industries including the chlorine industry, oil & gas drilling, oil & gas refineries (catalysts) and fluorescent lamps recycling. Due to strict legal restrictions and HSE requirements, mercury-contaminated waste is required to be handled with special care. We at econ industries have the best solution for each specific mercury waste stream, with plants that are recognised as being state of the art from approval authorities worldwide.

    By econ industries services GmbH Office in West Essendon, AUSTRALIA.

  • Premium

    Hazardous waste treatment solutions for oil and gas industry

    There are a wide amount of applications for our VacuDry® process within the oil and gas industry. A large variety of wastes and by-products that are generated in the oil & gas production chain can be treated effectively and sustainably. In past decades, numerous thermal desorption processes have been implemented worldwide, using a variety of heating chamber designs to separate hydrocarbons from the mineral solids. Such standard TDUs work under atmospheric pressure which can lead to safety risks, high...

    By econ industries services GmbH Office in West Essendon, AUSTRALIA.

  • Premium

    Gas Detection and Analysis Equipment for Oil and Gas Industry

    The Oil & Gas segment is the biggest market for gas detection and analysis equipment. It is common to describe this industry based on the product flow, from “Upstream” exploration and extraction location toward a “Downstream” flow, which end up at the end user home or business. Throughout the Oil and Gas industry, leaks are a real concern.

    By EyeCGas -OGI by OPGAL Distributor in Hope Island, AUSTRALIA.

  • Premium

    Analytical instruments for oil and gas industry

    When it comes to ensuring product quality and optimizing processes, identifying elementary impurities is absolutely essential for quality control laboratories in refineries and in the production of secondary fuels. We can provide you with a variety of detection solutions developed for industrial routine applications with very high sample volumes as well as for experimental laboratories with frequently alternating areas of focus in their chemical analysis. Analytik Jena’s diverse range of solutions keeps you...

    By Analytik Jena - an Endress+Hauser Company Distributor in Lane Cove, AUSTRALIA.

  • Premium

    Water & wastewater treatment solutions for oil & gas upstream industry

    Sustainable Technologies for Treating Produced Water for Reuse or Deep Well Injection. Oil and gas exploration and production are highly complex and capital-intensive processes. Producers face many challenges, including the constraints of climate, environment, and geography. As companies extract oil and gas in areas that at one time were considered unpromising, water plays an ever more essential role.

    By Fluence Corporation Office in Carlton, AUSTRALIA.

  • Premium

    Oily Waste Plants for Oil and Gas Industry

    Wherever oil is produced, processed, transported or stored, our clients face large amounts of oily waste in many different forms. Our VacuDry technology allows efficient and environmentally friendly treatment of all oily waste streams within a single plant. Due to the conditions under which the waste is treated (low temperature, vacuum and nitrogen blanketing), the recovered oil can then be reused after treatment.

    By econ industries services GmbH Office in West Essendon, AUSTRALIA.

  • Premium

    Emission control solutions for oil & gas industry

    In Fluid Catalytic Cracking (FCC)processes, widely used in oil refineries, the separation and recovery of powder catalysts is a major concern. Particularly, the concentration of catalyst after the FCC regenerator is usually over 150 mg/Nm3. Since these levels of emissions didn`t represent any environmental harm in the past, they were not controlled by any separator or filter. Plant managers main concern was to clean a fraction of the gas to produce energy in a Turbo Expander, or similar, while concentrating the...

    By Advanced Cyclone Systems, S. A. Distributor in Wellington, NEW ZEALAND.

  • Premium

    VOC abatement equipments for oil, gas & petroleum

    The need to remove and separate liquids as well as contaminants is fundamental to the oil and gas industry; from exploration through production, transportation, refining right up to point of sale.

    By Munters Office in Northmead, AUSTRALIA.

  • Premium

    Measurement of C1-C5 with carbon dioxide for oil & gas exploration.

    The PetroAlert Model 8900 combines the selectivity of gas chromatography with the sensitivity, broad dynamic range, and hydrocarbon selectivity of a flame ionization detector (FID) providing fast analysis of C1-C5 hydrocarbons and Carbon Dioxide required in Mud Logging for Oil & Gas exploration. The PetroAlert Model 8900 uses a dual column configuration with timed backflush to vent which is used to strip off moisture and C6+ hydrocarbons. A pre-cut column is used in series with the analytical column. At...

    By AMETEK MOCON - Baseline Distributor in AUSTRALIA.

  • Premium

    Industrial filtration solutions for the oil & gas industry

    Industrial filtration solutions for the oil & gas industry.

    By Hilliard Corporation Distributor in Welshpool, AUSTRALIA.

  • Premium

    Measurement of C1-C5 hydrocarbons for oil & gas exploration.

    The PetroAlert Model 8900 combines the selectivity of gas chromatography with the sensitivity, broad dynamic range, and hydrocarbon selectivity of a flame ionization detector (FID) providing fast analysis of C1-C5 hydrocarbons required in Mud Logging for Oil & Gas exploration. The PetroAlert Model 8900 uses a dual column configuration with timed backflush to vent which is used to strip off moisture and C6+ hydrocarbons. A pre-cut column is used in series with the analytical column. At sample injection a fixed...

    By AMETEK MOCON - Baseline Distributor in AUSTRALIA.

  • Premium

    Water treatment solutions for oil and gas industry

    "Made in Germany" for the global oil and gas industry. ProMinent`s tailored products are made in Germany. Designed as complete solutions and manufactured in-house, they are quickly ready for use (up-, mid- and downstream).

    By ProMinent GmbH Office in Belrose, AUSTRALIA.

  • Premium

    Static pipe mixers, open channel mixers and enclosed duct mixers for oil, gas & petrochemical applications

    Applications in the oil, gas and petrochemical industries range from low viscosity turbulent flow static mixing to high viscosity laminar flow static mixing of miscible liquids, immiscible liquids and gases, along with applications for custody transfer and fiscal measurement. Fabrication requirements are particularly demanding with regard to QA/QC, exotic materials of construction and high pressure applications.

    By Statiflo International Ltd. Distributor in Hallam, AUSTRALIA.

  • Premium

    Leak detection solutions for oil & gas industry

    PermAlert builds world-class leak detection system technology for pipelines and critical infrastructure with heightened monitoring, alerts, and safety to protect oil and gas assets.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you