Air & Climate Applications in Austria
-
Premium
Gas Leak Detection for the Gas Industry
Sewerin gas detection instruments are used to identify and quantify gas leaks in natural gas distribution networks. Designed to be intuitive to use for many different tasks in the gas utility industry the infrared sensors ensure accuracy and sensitivity. Our equipment is used in many countries by all the world's major gas supply companies. ...
By Hermann Sewerin GmbH Distributor in Fischamend, AUSTRIA.
-
Premium
Ambient air quality monitoring solutions for fence-line monitoring
The OPSIS open-path monitoring system is an excellent tool for monitoring the air quality, fugitive emissions and gas leaks at industrial sites. By arranging monitoring paths strategically at locations outside the borderline of an industrial area, fugitive emissions and gas leaks will effectively be detected. By combining the measured gas data with meteorological parameters information such as where the pollution sources are located and the strength of the emissions can be calculated, using the EnviMan ...
By OPSIS AB Distributor in Raaba, AUSTRIA.
-
Premium
Gas monitoring instruments and systems for engine emissions measurements
The exhaust gas from combustion engines is a complex mixture of gases and particulate matter. The composition of the gas may change rapidly. Multicomponent analysis of exhaust gases can be performed with a Gasmet™ FTIR Gas Analyzer with a response time (T90) of one second. The winning combination is the result using of a small volume gas sample cell, a powerful sample pump and a fast detector with liquid nitrogen cooling. The analyzer, sampling system and computer can be assembled on a cart for use in a ...
By Gasmet Technologies - a Nederman company Distributor in Enns, AUSTRIA.
-
Premium
On-line gas, particulate analyzers, flow monitors, data acquisition for steel industry
Customized solutions – from development to customer service! The carbon dust required for the production of steel can be continuously measured directly in the conveyor lance by specially developed measuring systems of ENVEA - SWR. With this technique thermal imbalances in blast furnace can be avoided, and it can be directly reacted to production stops. ...
By ENVEA Distributor in Wiener Neudorf, AUSTRIA.
-
Premium
Air pollution, emission and process monitoring systems for power generation
ENVEA’s involvement with the Power generation industry over many years has led to the development of a unique range of process optimization solutions, as well as approved (TÜV and MCERTS) technologies for in-stack measurement of gas, particulate and flow concentration. They allow to optimize the whole-plant’s efficiency through measurement & control, facilitate legislative compliance, support ISO 14000 objectives and save operational costs by reducing plant’s maintenance requirements and ...
By ENVEA Distributor in Wiener Neudorf, AUSTRIA.
-
Premium
Analysis of VOC compounds in water by Purge & Trap or dynamic headspace
Context & Challenges Volatile organic compounds (VOC) can be dissolved in water. Sometimes water is polluted and to study contamination of VOC in finished drinking water, VOC must be measured. Chromatotec® Solutions Chromatotec® has developed a specific system for the measurement of VOC in water: a Purge & Trap system, the airmoPURGE. The analyzer is coupled with a degasing system allowing the extraction of dissolved gases. The complete system is based on: - 502.2 method from US EPA – ...
By Chromatotec Group Distributor in AUSTRIA.
-
Premium
Analytical Instruments for Water Analysis Applications
Efficient water analysis with leading technologies. Our solutions for higher water quality and purity: Discover applications and technologies for analyzing drinking, process as well as surface water, including salt water. Learn about analytical solutions for parameters such as TOC and TNb as well as analysis methods for mercury, trace and toxic elements. Benefit from culture-independent PCR methods for microbiological testing of condensates from evaporative cooling systems, for example, which allow results to be ...
By Analytik Jena - an EndressHauser Company Office in Pöttelsdorf, AUSTRIA.
-
Premium
Gas monitoring instruments and systems for stack testing
Several EU directives and national laws in European countries set requirements for continuous monitoring of flue gas emissions at power plants. Further requirements are set on the quality assurance of the installed measurement systems at the plants. The relevant standard in this regard is EN 14181:2004, the quality assurance of automated measuring systems. The standard dictates how to determine that the measurement systems installed for continuous emissions monitoring at a plant operate according to the directives ...
By Gasmet Technologies - a Nederman company Distributor in Enns, AUSTRIA.
-
Premium
Process air applications in food processing
Oil-free compressors with the highest possible security of supply and energy efficiency. Process air applications, such as pneumatic conveying systems in food processing, are under pressure to become cheaper and, at the same time, more reliable and productive. In addition, the highest demands are placed on the quality of the compressed air. Compliance with the increasingly strict hygiene regulations is essential to ensure the utmost safety in terms of food quality and thus reduce risks for the consumer. As a ...
By Aerzener Maschinenfabrik GmbH Office in Tresdorf, AUSTRIA.
-
Premium
Gas monitoring instruments and systems for process NOx measurement
Nitric acid HNO3 is an important intermediate reagent for production of several important end products, such as fertilizers, explosives, dyestuffs/pigments, pesticides, pharmaceuticals, photographic materials, plastics, and synthetic fibers. At nitric acid manufacturing plants, the Gasmet™ FTIR Gas Analyzer can be used to measure several gaseous components from the process stream for purposes of process control. A single system can be used to measure the high levels of nitrogen monoxide NO and nitrogen ...
By Gasmet Technologies - a Nederman company Distributor in Enns, AUSTRIA.
-
Premium
Monitors, gas analyzers solutions for ISO 22716 solutions for cosmetics & personal care
Providing you with a complete spectrum of contamination monitoring solutions. The Cosmetics and Personal Care manufacturing industry is required to meet ISO 22716:2007 and worldwide GMP Standards for hygienic production and contamination control. This includes monitoring viable and non viable contamination that could impact the safety and quality of your products. Particle Measuring Systems brings in-depth knowledge of manufacturing processes and regulatory codes, such as ISO 22716, to Cosmetics and Personal Care ...
By Particle Measuring Systems (PMS) Office in Vienna, AUSTRIA.
-
Premium
Gas monitoring instruments and systems for DeNOx process control
In most combustion process atmospheric nitrogen reacts with oxygen in high temperature conditions to produce nitrogen oxides (NOx). Total NOx production is the sum of nitrogen monoxide NO and nitrogen dioxide NO2. The emissions of these gases are controlled through setting of emission limit values (ELVs) for power ...
By Gasmet Technologies - a Nederman company Distributor in Enns, AUSTRIA.
-
Premium
Emissions Monitoring for Cement Plants
Opsis provides state-of-the-art monitoring equipment, fully meeting the high standards of monitoring performance and reliability that the cement industry requires. The Opsis in situ systems are designed to withstand environments with high particulate levels and high ...
By OPSIS AB Distributor in Raaba, AUSTRIA.
-
Premium
Fully-automated gas chromatographs solutions for soil sanitation sector
Clean up of soil pollutants often involves the air extraction of the contaminated ground. By measuring the concentration of VOCs in the air, the progress of the cleaning process can be monitored and optimised. The robust Synspec analysers monitor the recovery process of the ...
By Synspec BV Distributor in , AUSTRIA.
-
Premium
Blowers, compressors and gas meters for maritime industry
Screw compressors, positive displacement blowers and rotary lobe compressors are essential for ships of all sizes with a variety of applications and processes. As specialist for the compression of process air and process gases we understand exactly what you require. Thanks to 150 years of experiences in development and manufacture of blowers and compressors, AERZEN always provides you with the product solution you ...
By Aerzener Maschinenfabrik GmbH Office in Tresdorf, AUSTRIA.
-
Premium
Emissions Monitoring for Chemical Plants
The Opsis gas monitoring system is designed for monitoring in stacks and gas ducts in chemical industries, both in order to increase plant efficiency and to monitor emissions. The Opsis systems have been internationally approved by e.g. the German TÜV and the U.S. ...
By OPSIS AB Distributor in Raaba, AUSTRIA.
-
Premium
Measurement of water for the oil industry
By Analytik Jena - an EndressHauser Company Office in Pöttelsdorf, AUSTRIA.
-
Premium
Chromatography laboratory instrumentation for chemical industry
Effective, safe and sustainable processes play a key role in the chemical industry. To meet these needs, BUCHI offers a variety of reliable and modern solutions for R&D, scale-up, production and quality ...
By BUCHI Office in Purkersdorf, AUSTRIA.
-
Premium
Gas analyzers for the food and beverage industry
Detecting CO2 impurities: Ammonia, Acetaldehyde, Benzene, Total Sulfur Content, Total Hydrocarbons, SO2, COS. Carbon dioxide (CO2) is a commonly used additive in food and beverage industry (e.g. for soft drink, brewery, and champagne carbonation). Its fabrication process can lead to the presence of impurities such as aromatics, BTEX, ammonia, acetaldehyde, Total Hydrocarbons and sulfur compounds (Total Sulfur Content, SO2, COS, ...
By Chromatotec Group Distributor in AUSTRIA.
-
Premium
Marine monitoring solutions for the SO2/CO2/NOx monitoring
Process control of a SO2 scrubber on a ship is a challenge due to wet and corrosive gases. In such environment, extractive gas sampling systems require high levels of maintenance in order to operate correctly. OPSIS monitoring system solves this by using an optical, non-contact, cross-duct technique. A light beam is sent across the duct or stack to be measured, and the captured light is sent through an optical fibre cable to an analyser. The analyser measures SO2, CO2 and NOx concentrations using UV and IR ...
By OPSIS AB Distributor in Raaba, AUSTRIA.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you