Air & Climate Applications in Canada

  • Premium

    Noise modeling for noise consulting

    Noise planning that supports many governments and engineering associations worldwide. 

    By SoundPLAN International LLC Distributor in CANADA.

  • Premium

    Odor control for remediation

    Helping others clean up the earth by clearing up brownfield remediation odors. Helping others clean up the earth by clearing up brownfield remediation odors. Brownfield remediation consists of removing large amounts of soil that have been saturated with tar, oil or other contaminating substances. Not only dangerous to handle, the disturbed soil is often infused with very unpleasant and in some cases potentially nauseous odors.

    By OMI Industries (OMI) Distributor in Anselme, QUEBEC (CANADA).

  • Premium

    Environmental solutions for the iron and steel industry

    The evaporative gas cooling and conditioning system uses a finely atomized water spray to cool EAF, BOF off-gases from over 2,400°F (1,315°C) to as low as 240°F (115°C), protecting ductwork and downstream air pollution control equipment from high temperature and sparks, while providing rapid cooling for dioxin and furan control. By optimizing humidity levels, it helps electrostatic precipitators because the water spray completely evaporates while cooling the gases. There is no free water and no...

    By Dürr Megtec LLC Office in Waterloo, ONTARIO (CANADA).

  • Premium

    Environmental solutions for the refining and petrochemical industry

    Refining and Petrochemical Safety, Reliability and Environmental Sustainability.

    By Dürr Megtec LLC Office in Waterloo, ONTARIO (CANADA).

  • Premium

    Environmental solutions for the composites & carbon fiber industry

    Dürr MEGTEC provides roll-to-roll drying, curing and thermal air handling systems for coating and laminating applications. Whether you need a small, value-priced roll support dryer, a custom-configured air flotation dryer or a complete coating line for a specialized application, Dürr MEGTEC has the products and services to meet your requirements. Our technical application and design engineers work with your process specialists or OEM suppliers to design systems that will provide reliable, high...

    By Dürr Megtec LLC Office in Waterloo, ONTARIO (CANADA).

  • Premium

    Odors control for solid waste

    A solid solution for solid waste odors. All areas of solid waste handling are, by nature, odorous affairs. Municipal sludge, municipal solid waste, landfills, composting and co-composting facilities all generate odors that can be offensive to workers and the community at large. The process is a complex one, with multiple drops, collections, transfers and sortings of recyclable and non-recyclable material. Combustible materials are then incinerated for energy production.

    By OMI Industries (OMI) Distributor in Anselme, QUEBEC (CANADA).

  • Premium

    Odor control for liquid waste

    Vaporize Odors Associated With Liquid Waste Processing: Liquid waste, such as fats, oils and grease (F.O.G.) can emit unpleasant odors, which become even more pronounced in various stages of processing. Malodorous F.O.G. from restaurants are often transported by truck to F.O.G. filtering facilities and then to plants where they are processed into useable byproducts.

    By OMI Industries (OMI) Distributor in Anselme, QUEBEC (CANADA).

  • Premium

    Odor control for wastewater treatment processes

    Natural odor control for wastewater treatment processes. Industrial and municipal wastewater treatment generates odors that can be strong, persistent, and a nuisance to employees, residents, businesses, and industries located near the wastewater treatment plant.

    By OMI Industries (OMI) Distributor in Anselme, QUEBEC (CANADA).

  • Premium

    odor control for asphalt

    Control Asphalt Odors Naturally: The production of hot mix paving asphalt generates odors that can be strong, persistent, and a nuisance to employees and neighbors alike. Controlling and abating these odors can be a challenge.

    By OMI Industries (OMI) Distributor in Anselme, QUEBEC (CANADA).

  • Premium

    Water & wastewater treatment solutions for food & beverage industry solutions

    Our best-in-class solutions serve the needs of a wide range of food and beverage manufacturers across the globe. Fluence has more than 30 years of experience in delivering water, wastewater, and waste-to-energy projects to the food and beverage industry across the globe. Our unique technologies provide best-in-class treatment for incoming ingredient water, reduce operating costs by turning waste into a resource, and help our customers enhance their products.

    By Fluence Corporation Office in Bogotá, BRITISH COLUMBIA (CANADA).

  • Premium

    Odor control for metal casting

    Use Ecosorb products to remove foundry smells naturally. Ecosorb odor control products by OMI Industries are extremely effective at breaking down and eliminating the many odorous gases produced by the metalcasting process. They chemically convert foul and potentially harmful gases into non-odorous byproducts. Within the metalcasting industry, Ecosorb products are effective on amines, sulfur dioxide, phenols, formaldehyde, ammonia, partially burnt hydrocarbons solvent odors and more.

    By OMI Industries (OMI) Distributor in Anselme, QUEBEC (CANADA).

  • Premium

    Water Testing for Environmental Applications

    Keeping the water in our lakes, rivers, and streams clean requires monitoring of water quality at many points as it gradually makes its way from its source to our oceans. Over the years ever increasing environmental concerns and regulations have heightened the need for increased diligence and tighter restrictions on wastewater quality. Control of water pollution was once concerned mainly with treating wastewater before it was discharged from a manufacturing facility into the nation`s waterways. Today, in many...

    By Myron L Company Distributor in CANADA.

  • Premium

    Water Testing for Horticulture

    Modern growing practices include scientific evaluations of soil, water, fertilizers, diseases, etc. While some tests are best performed by a laboratory, others can be easily conducted on location, saving time and money. Three tests in particular, EC, pH, and ALKALINITY, can reveal valuable information about water quality, soil salinity, and fertilizer concentration. MyronL Company’s portable AGRI-METERS provide you with a simple, fast, and accurate means of testing these parameters.

    By Myron L Company Distributor in CANADA.

  • Premium

    AutoChem - Process Development and Scale-Up

    Process Development in the chemical industry requires a profound and comprehensive knowledge of the processes involved and is governed by a triangular relationship between `Economy - Safety - Environment`.

    By Mettler - Toledo Int. Inc Distributor in QUEBEC (CANADA).

  • Premium

    Odor control for composite

    A Single Solution To Manage Composite Odors: Many resins used in the composite industry emit styrene vapors which are considered hazardous in high concentrations and whose odor is an unpleasant nuisance. This gas is categorized as a volatile organic compound (VOC) and listed by the United States Environmental Protection Agency (US EPA) as a Hazardous Air Pollutant (HAP). Styrene is considered highly reactive in the atmosphere and may contribute to smog formation and the production of secondary air pollutants.

    By OMI Industries (OMI) Distributor in Anselme, QUEBEC (CANADA).

  • Premium

    Boiler Water Testing / Cooling Tower Water Testing

    Boilers and cooling towers share two major water related problems: deposits and corrosion. As steam is generated by a boiler or water evaporating from a cooling tower, dissolved minerals are left behind, increasing the concentration of these minerals. Additional minerals are introduced via the water added to makeup the water lost to steam/evaporation. Eventually, the minerals reach a level (or cycle) of concentration that will cause either loss of efficiency due to scale or damage from corrosion. This level...

    By Myron L Company Distributor in CANADA.

  • Premium

    Environmental solutions for the automotive and industrial painting industry

    Automotive, industrial painting and other finishing applications. Reliability and uptime are essential. Uninterrupted production—all are essential requirements in painting and finishing applications. Just-in-time manufacturing demands uninterrupted production and smooth pressure control that eliminates pressure fluctuations in the painting and finishing process. Dürr MEGTEC has supplied many systems to tier 1 and tier 2 automotive plants where high volume, low concentration exhaust streams are...

    By Dürr Megtec LLC Office in Waterloo, ONTARIO (CANADA).

  • Premium

    Environmental solutions for the cement manufacturing industry

    Evaporative gas cooling and conditioning systems use specially engineered atomizing nozzles that introduce a controlled amount of finely atomized water into the hot gas stream to reduce and/or maintain gas temperature. The water evaporates completely while absorbing heat from the gases, which results in free-flowing dust, zero liquid discharge, and minimal or no problems with scale buildup on the walls.

    By Dürr Megtec LLC Office in Waterloo, ONTARIO (CANADA).

  • Premium

    Laboratory Weighing - Filter Weighing

    Traffic means mobility and air emissions. Thanks to economical advantages, diesel engine becomes more and more popular, but particle emission is strictly restricted by regulations. Determining the weight of particulate matter (PM) is a key task in the automotive industry and one which is likely to become even more important as emissions standards become stricter. To allow fast and easy measurement of particulate matter at any time, METTLER TOLEDO has developed new filter weighing solutions.

    By Mettler - Toledo Int. Inc Distributor in QUEBEC (CANADA).

  • Premium

    Laboratory Weighing - Differential Weighing

    Perfecting a classical method. Determining the difference between the initial and residual weights of samples in percent and grams is one of the most frequent routine applications in a laboratory. METTLER TOLEDO offers a complete solution in this area. It consists of a balance, a printer, and application software for the specific balance being used. There is a choice between an integrated balance application, or an optional software cassette which simply plugs into the balance.

    By Mettler - Toledo Int. Inc Distributor in QUEBEC (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you