Only show results in Virginia? Ok

Air & Climate Applications

  • Premium

    Cement

    MEGTEC's extensive scrubber experience applies to the cement manufacturing process for the effective control of SO2 and HCl by the injection of lime slurry. Our customers can achieve up to 90% reduction of SO2 and 98% reduction of HCl using microfine or standard lime. The TurboSorb Spray Dryer Absorber (SDA) can often retrofit into an existing gas conditioning tower, or downcomer duct, to avoid the high cost of new capital equipment.

    By Babcock & Wilcox MEGTEC LLC based in De Pere, WISCONSIN (USA).

  • Premium

    Automotive and Industrial Painting

    Reliability. Uptime. Uninterrupted Production - all are essential requirements in painting and finishing applications. Just-in-time manufacturing demands uninterrupted production and smooth pressure control that eliminates pressure fluctuations in the painting and finishing process. MEGTEC has supplied many systems to Tier 1 and Tier 2 automotive plants where high volume, low concentration exhaust streams are treated economically and effectively, yet adaptable to changing finishing formulations.

    By Babcock & Wilcox MEGTEC LLC based in De Pere, WISCONSIN (USA).

  • Premium

    Ethanol and Biofuels

    Controlling the VOCs and CO emissions produced in the feed dryers (wet and dry milling), coupled with the particulate matter being introduced and the need for the reduction of NOx are just the start of having a successful abatement solution. The challenges of smooth pressure control that reduces dryer fluctuations and plug resistant media that lessen the frequency of bake-outs are also part of a successful abatement system and we have the solutions. Our engineered oxidation systems provide reliable performance with minimal maintenance requirements. Externally accessible valve bearings and other critical components are kept out of the corrosive moisture-laden streams extending the life of the equipment and facilitate maintenance intervals. Our simple oxidizer designs control your emissions with minimal facility intervention and allow us to provide you with reliable and dependable equipment.

    By Babcock & Wilcox MEGTEC LLC based in De Pere, WISCONSIN (USA).

  • Premium

    Iron and Steel

    SoniCool™ Evaporative Gas Cooling & Conditioning uses a finely atomized water spray to cool EAF, BOF off-gases from over 2,400°F (1,315°C) to as low as 240°F (115°C), protecting ductwork and downstream air pollution control equipment from high temperature and sparks, while providing rapid cooling for dioxin and furan control. By optimizing humidity levels, SoniCool™ helps electrostatic precipitators. The water spray completely evaporates while cooling gases. There is no free water and no troublesome deposits in ducts, towers or hoppers. Turbotak rugged nozzles are made to the exact requirement, and ideally suited to the harsh conditions in the steel manufacturing process while still producing ultra-fine sprays, with precise control of dropsize and spray coverage.

    By Babcock & Wilcox MEGTEC LLC based in De Pere, WISCONSIN (USA).

  • Premium

    Petrochemical

    Durable regenerative thermal oxidizer (RTO) technology is at the core of our systems. MEGTEC designs and engineers system solutions to meet your special requirements, ranging from energy-efficient treatment of dilute volatile organic compound (VOC) flows, such as tank ventilation, to demanding applications utilizing VOC energy for secondary heat recovery; for example, in the form of process streams. This can include pre- and tail gas treatment systems, and could handle hazardous components such as sulphurous or chlorinated hydrocarbons. For special requirements, we can offer FTO (flameless thermal oxidation) and we can design systems operating safely on oxygen contents below 5%.

    By Babcock & Wilcox MEGTEC LLC based in De Pere, WISCONSIN (USA).

  • Premium

    Noise modeling for noise consulting

    Noise planning that supports many governments and engineering associations worldwide. 

    By SoundPLAN International LLC based in Shelton, WASHINGTON (USA).

  • Premium

    Water & wastewater treatment solutions for food & beverage industry solutions

    Our best-in-class solutions serve the needs of a wide range of food and beverage manufacturers across the globe. Fluence has more than 30 years of experience in delivering water, wastewater, and waste-to-energy projects to the food and beverage industry across the globe. Our unique technologies provide best-in-class treatment for incoming ingredient water, reduce operating costs by turning waste into a resource, and help our customers enhance their products.

    By Fluence Corporation based in White Plains, NEW YORK (USA).

  • Premium

    Odor control for wastewater treatment processes

    Natural odor control for wastewater treatment processes. Industrial and municipal wastewater treatment generates odors that can be strong, persistent, and a nuisance to employees, residents, businesses, and industries located near the wastewater treatment plant.

    By OMI Industries (OMI) based in Long Grove, ILLINOIS (USA).

  • Premium

    Odor control for metal casting

    Use Ecosorb products to remove foundry smells naturally. Ecosorb odor control products by OMI Industries are extremely effective at breaking down and eliminating the many odorous gases produced by the metalcasting process. They chemically convert foul and potentially harmful gases into non-odorous byproducts. Within the metalcasting industry, Ecosorb products are effective on amines, sulfur dioxide, phenols, formaldehyde, ammonia, partially burnt hydrocarbons solvent odors and more.

    By OMI Industries (OMI) based in Long Grove, ILLINOIS (USA).

  • Premium

    odor control for asphalt

    Control Asphalt Odors Naturally: The production of hot mix paving asphalt generates odors that can be strong, persistent, and a nuisance to employees and neighbors alike. Controlling and abating these odors can be a challenge.

    By OMI Industries (OMI) based in Long Grove, ILLINOIS (USA).

  • Premium

    Odors control for solid waste

    A solid solution for solid waste odors. All areas of solid waste handling are, by nature, odorous affairs. Municipal sludge, municipal solid waste, landfills, composting and co-composting facilities all generate odors that can be offensive to workers and the community at large. The process is a complex one, with multiple drops, collections, transfers and sortings of recyclable and non-recyclable material. Combustible materials are then incinerated for energy production.

    By OMI Industries (OMI) based in Long Grove, ILLINOIS (USA).

  • Premium

    Odor control for remediation

    Helping others clean up the earth by clearing up brownfield remediation odors. Helping others clean up the earth by clearing up brownfield remediation odors. Brownfield remediation consists of removing large amounts of soil that have been saturated with tar, oil or other contaminating substances. Not only dangerous to handle, the disturbed soil is often infused with very unpleasant and in some cases potentially nauseous odors.

    By OMI Industries (OMI) based in Long Grove, ILLINOIS (USA).

  • Premium

    Odor control for liquid waste

    Vaporize Odors Associated With Liquid Waste Processing: Liquid waste, such as fats, oils and grease (F.O.G.) can emit unpleasant odors, which become even more pronounced in various stages of processing. Malodorous F.O.G. from restaurants are often transported by truck to F.O.G. filtering facilities and then to plants where they are processed into useable byproducts.

    By OMI Industries (OMI) based in Long Grove, ILLINOIS (USA).

  • Premium

    Hazardous waste treatment solutions for chlorine industry

    The mercury cell process is a formerly widely-used production technique for the production of chlorine and caustic soda. The liquid metal, mercury, acts as cathode (negative pole) in this process. In the past, the loss of mercury during the process (to air, soil and water) led to serious health and environmental problems. Therefore, most European chlorine producers have decided to phase out the mercury cell process by 2020. Nevertheless, even today, almost 6000 tons of mercury is used per year for chlorine production in Europe alone. As a result of this, yearly waste outputs contain around 1200 tons of mercury, which are stored on-site or sent off for disposal.

    By econ industries GmbH based in Starnberg, GERMANY.

  • Premium

    Soil Remediation Plants for Soil and Groundwater Industry

    Contaminated soil and building-rubble can be efficiently treated with VacuDry technology, including a diverse range of toxic and hazardous substances. VacuDry units also have low emissions and low power consumption, making on-site treatment with our mobile units both economically and environmentally sound.

    By econ industries GmbH based in Starnberg, GERMANY.

  • Premium

    Reduce biofilm formation

    In many industrial or professional applications where water is being stored, biofilm may grow. The growth of biofilm can damage the installations and reduce efficiency of the circuit. A biofilm can grow certain substrates which can be found in water. When temperatures are high, for example in cooling towers, a matrix of different micro- organisms such as bacteria, fungi, algae can grow very rapidly causing the formation of a biofilm on certain surfaces submerge in water. During the formation of this biofilm, certain micro organisms starts producing extra cellular polymeric substances (EPS) which reinforce the biofilm structure.

    By LG Sonic based in Zoetermeer, NETHERLANDS.

  • Premium

    Cooling Tower, algae and biofilm control

    “Efficiently lowers algae, biofilm formation, bacterial counts and chemical consumption.” When temperatures are high, for example in cooling towers, a matrix of different microorganisms such as bacteria, fungi, EPS and algae can grow very rapidly. The disadvantages of biofilm formation in cooling towers can be enormous. Therefore water used in cooling towers needs frequent treatment and chemical shocks to keep levels of micro-organisms to a minimum.

    By LG Sonic based in Zoetermeer, NETHERLANDS.

  • Premium

    Air pollution control for ventilation air methane industry

    Ventilation Air Methane (VAM) is a Greenhouse Gas (GHG) released by coal or mineral mining operations, it is also commonly known as Coal Mine Methane (CMM).  The air pollutants from this process have a global warming potential 21 times greater than carbon dioxide, which is another well known GHG.  As alternative energy technologies have developed, methane is increasingly used to generate electricity and heat.  Landfills and mines represent two of the most abundant sources, however reports indicate that more than 50% of all VAM is exhausted from mine ventilation systems and remains unutilized.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Air pollution control for the rubber curing industry

    One-time, on-site final destruction of particulates. This is the key benefit gained from an Anguil solution to the emissions generated by the rubber curing process. Other advantages of an Anguil solution include the elimination of visible blue haze, guaranteed destruction efficiency compliance, and the elimination of costly mechanical filtration media and the lingering liability issue associated with filter disposal.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Air pollution control for the printing, laminating & converting industry

    Achieving cost effective local regulatory compliance in the printing and converting industry requires a complete understanding of both regulatory standards and the printing process. Through experience, Anguil has developed unparalleled expertise in meeting your unique requirements. We understand the effects of water versus solvent-based inks on the line, elimination of odors and toxic fumes from dryers and oven tunnel exhausts, and the capture of fugitive emissions. Over 300 successful printing installations worldwide, in plants just like yours, have shown Anguil to be a Proven Solutions Provider.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you