Atmospheric Modeling Equipment For Air And Climate Available In Bosnia & Herzegovina
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The HPD II reduces the pressure of dry, inert, non-toxic, non-flammable gases, such as Clean Dry Air (CDA), nitrogen, carbon dioxide and argon to a level acceptable for the Lasair II 110 and Lasair III 110 aerosol particle counters, which are designed to operate at atmospheric ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
The vigiODOR solution is based on Plumair web platform. This unique solution allows to forecast and monitor in real-time the dispersion of odour and gas plumes (H2, NH3 VOC, TBM, etc) around industrial sites. Connected to the network of vigi e-noses analyzers and to the weather station installed on-site, it provides real-time key information for optimised operation of facilities and efficient ...
-
PremiumManufactured by For.Tec. Forniture Tecnologiche S.r.l.based in ITALY
Crematory ovens mod. FT have been designed with an innovative technique which allows to maximize the cremation process, thanks to finest refractory materials and systems for heat recovery and reutilization which otherwise would be lost in the ...
-
Manufactured by Advanced Micro Instruments, Inc. (AMI)based in USA
The MODEL 2001RS and 2001RSP are advanced Trace Oxygen Analyzers loaded with a full suite of standard features. The Analyzers’ compact design includes AMI’s patented ELIMINATOR CELL BLOCK™ technology, incorporating a complete sample system, and combines it with our industry-leading trace O2 sensors. This combination delivers accurate, reliable and extremely fast response times ...
-
Manufactured by Super Systems India Pvt. Ltd.based in INDIA
The RPS reads the signal from two oxygen probes located in the same furnace, automatically switching the output from the 9120 using the oxygen probe with the highest millivolt output. Additionally a manual selection of the probe is ...
-
Manufactured by Griffin Filters LLCbased in USA
Griffin Filters offers numerous models within the Clean-A-Batch system capable of providing dust free operation for your batch plant. Whether your needs are for Transit Mix (dry), Central Mix (wet) or Combination; whether it is high or low production; a stationary or portable plant; we have the equipment to give you the assurance of meeting today's environmental standards. There are three steps ...
-
Manufactured by Bry-Air (Asia) Pvt. Ltd.based in INDIA
Bry-Air, the leaders in Dehumidification ... worldwide, is a global solution provider having over 50 years of experience in air treatment and dehumidification. It has strong presence in the Indian sub-continent and is the leading state-of-the-art manufacturer of Gas Phase Filtration (GPF) Systems in India since last 15 years and known for setting new benchmarks. The strong research & ...
-
Manufactured by Jiangyin Yimaisheng Hydraulic Machinery Co., Ltd.based in CHINA
During metal manufacturing, As a result of machining, a vast amount of aluminium scrap is formed. The metal residue from the process in many different industrial operations of diverse branches. Do you want to drive down production costs? The Hydraulic Metal Baler is also known as the Metal Baler, they are used to compress scrap metal and waste material to create dense bales. The Hydraulic metal ...
-
Manufactured by Airedale Internationalbased in UNITED KINGDOM
The TurboChill™ spray evaporator range has been designed with the future of refrigerants in mind. The range uses spray flooded evaporator technology, which allows the system charge to reduce by over 50% compared to a standard flooded heat exchanger. Savings of up to 70% refrigerant charge can be made in the evaporator alone. ...
-
Manufactured by FAI Instrumentsbased in ITALY
In order to understand the pollutants accumulation and, in general, the temporal evolution of all air pollution processes, it is necessary to know the low atmosphere layers dilution properties. To get information about the Planetary Boundary Layer dilution potential you need to monitor a chemically stable compound (Radon) with an emission flow that can be considered constant in the interested ...
-
Manufactured by VANECbased in USA
The VANEC Model 316 Intake Silencer is designed for use in suppressing the intake noise from high speed blowers, fans, engines and centrifugal air handling devices with an atmospheric suction. The Model 316 Intake Silencer, when properly applied, will reduce intake noise to a community acceptable level for dwellings located further than 1,600 ft. from the intake opening. Silencer performance will ...
-
Manufactured by Tyne USA, Inc.based in USA
Used by Active Waste Facilities , Research Establishments, Nuclear Facilities and Fusion Laboratories. Model: 7030-OXZR-001 (Catalytic Oxidizer) was designed for converting organics containing tritium, to water that contains the tritium. This conversion is necessary for tritium removal processes because it is easier to extract tritium for safe storage from water than from ...
-
Manufactured by Boreal Laser Inc.based in CANADA
Primary uses of the GasFinder3-OP are to: Continuously monitor gas concentrations over open area sources. Provide immediate and unambiguous detection of gas leaks. Can be combined with weather data and an atmospheric dispersion model to give a measured emission rate. ...
-
Manufactured by SK Environmental Ltdbased in UNITED KINGDOM
The SK flue gas oxygen monitor is designed to provide a reliable and accurate measurement of oxygen within the flue gases from industrial boilers; furnaces and incinerators. The monitoring of oxygen within the flue gas is the most reliable and repeatable means of assessing correct burner operation, combustion efficiency and thereby minimising emissions in the atmosphere. The Model 2016 is a solid ...
-
Manufactured by Solar Lightbased in USA
Model 540 MICROTOPS II Sunphotometer is a 5 channel hand-held sunphotometer for measuring aerosol optical thickness easily, accurately and dependably. Direct solar radiation at 5 discrete wavelengths is measured and stored. MICROTOPS II Sunphotometer features an accuracy comparable to much larger and more expensive instruments. Optional GPS receiver facilitates field ...
-
Manufactured by Windlab Systems Pty Ltd.based in USA
Wind resource modelling has its origins in the 1970’s. Since then much has changed in terms of the models used and the methods for wind data collection. However, one thing that has not changed significantly is the overall methodology used to create a high resolution wind map across a wind farm for the purpose of optimising turbine locations. Windlab has been working to develop a much more ...
-
Manufactured by Raille Limitedbased in UNITED KINGDOM
Manufactured with a stainless steel casing, Raille spark detectors are robust and reliable, even in harsh industrial environments. The detector lens is installed almost flush with the inside wall of the extraction duct or drop chute, so it does not interfere with material flow. ATEX approved for use in zone 20 explosive atmospheres. The FSK3 model spark detector (direct mount model) reacts to ...
-
Manufactured by Advanced Micro Instruments, Inc. (AMI)based in USA
The MODEL 111 is the ideal solution for spot-checking percent oxygen measurements in non-flammable gas samples. It utilizes a long-life zirconium oxide sensor that delivers stable readings – even in the presence of temperature or barometric pressure changes. The Analyzer can connect to the COMMAND CENTER software to access data logging functionality and is available in 3 configurations ...
-
Manufactured by Jiangyin Yimaisheng Hydraulic Machinery Co., Ltd.based in CHINA
The Metal Scrap Briquetting Machine increases the value of brass chips, loose turnings and swarf by compressing them into high-density briquettes for brass scrap recycling to send to the recycler or feed to the furnace. A Scrap Briquetting Press also could be used to squeezes out harmful coolants from brass chips. The cooling lubricants that adhere to the chips are efficiently recovered by our ...
-
Manufactured by Advanced Micro Instruments, Inc. (AMI)based in USA
The MODEL 201RS and 201RSP are advanced Percent Oxygen Analyzers loaded with a full suite of standard features. The Analyzers’ compact design includes AMI’s patented ELIMINATOR CELL BLOCK technology, incorporating a complete sample system, and combines it with our industry leading Percent O2 sensors. This combination delivers accurate, reliable and extremely fast response times in a ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you