Atmospheric Monitoring Equipment For Air And Climate Available In Hawaii
-
ShowcaseManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran 2537 performs continuous long-term, unattended analysis of gaseous elemental mercury with unmatched accuracy, sensitivity, and reliability. The Tekran 2537 is easy to setup, use, and maintain and has long been known for its stable performance in rugged conditions. Our instruments have been installed at both Polar Regions, on ocean research vessels and hundreds of locations in between. ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
AM-5100 is a portable SO2 analyzer adopts ultraviolet fluorescence technique and combines advanced micro processing technology, which could provide accurate and reliable SO2 detection at low level ppb~ppm.This SO2 gas analyzer can be applied to atmospheric monitoring and dilution-based CEMS monitoring ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The HPD II reduces the pressure of dry, inert, non-toxic, non-flammable gases, such as Clean Dry Air (CDA), nitrogen, carbon dioxide and argon to a level acceptable for the Lasair II 110 and Lasair III 110 aerosol particle counters, which are designed to operate at atmospheric ...
-
PremiumManufactured by Sauereisen Inc.based in USA
The Sauereisen Fast-Trak™ Lining Series is a fiber-reinforced lining system specifically designed to protect concrete, steel or masonry surfaces in the pulp & paper industry. Fast-Trak™ has the chemical resistance to withstand the bleaches, liquors and other corrosive substances that attack unprotected trenches, sumps and chests in paper mills. Depending on the chemical and ...
-
PremiumManufactured by Sauereisen Inc.based in USA
ConoGlaze - General Purpose 201 is a chemically-resistant, 100% solids, epoxy coating system. It is used as a topcoat for Sauereisen ConoCrete or FibreCrete systems or as a coating to protect concrete and steel from chemical attack. ConoGlaze may be used in many kinds of manufacturing, processing, storage, and shipping areas. It is formulated as a general purpose sealer to resist most acids and ...
-
PremiumManufactured by Qingdao Leice Transient Technology Co., Ltd.based in CHINA
The WindMast350-MP system is designed for offshore wind measurement, with mature technology and flexible installation methods. It can be installed on existing platforms or to-be-built platforms. The whole system includes wind measurement lidar, customized power supply system, protection system, GPS/Beidou satellite communication system etc., which can ensure accurate measurement and stable work ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
A non-disruptive pyrometer system designed specifically to measure the temperature of liquid metals in the foundry, during the process of pouring into moulds and ...
-
PremiumManufactured by Qingdao Leice Transient Technology Co., Ltd.based in CHINA
Based on the principle of optical pulse coherent Doppler shift detection, WindMast PBL can meet the high-precision and refined detection requirements of atmospheric three-dimensional wind field in the atmospheric boundary layer. Real-time output of wind profile, turbulence intensity, vertical airflow, boundary layer (cloud bottom) height, SNR (signal-to-noise ratio), backscattering intensity, ...
-
PremiumManufactured by Oizom Instruments Pvt. Ltd.based in INDIA
The AQBot VOC is a robust VOC Gas Monitor that can measure Volatile Organic Compounds in the air. This VOC gas detector uses photoionization detection (PID) technology to measure total volatile organic compounds in the air. This sensor module is enclosed in the IP65 rugged composite enclosure to protect from harsh ...
-
PremiumManufactured by Oizom Instruments Pvt. Ltd.based in INDIA
The AQBot Cl2 is a robust Cl2 Gas Monitor that can measure Chlorine gas in the air. The Chlorine sensor module can accurately measure low concentrations of Cl2 at ppb level in the ambient air. The sensor module design is capable to monitor the Chlorine emissions from point sources on a real-time basis. This sensor module is enclosed in the IP65 rugged composite enclosure to protect from harsh ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
Ensuring worker safety from toxic levels of air mercury requires accurate and precise hand-held mercury monitors. The Tekran® JITRbug Instrument is designed as a rapid performance assessment tool for hand-held mercury industrial hygiene monitors. The system uses a built-in saturated mercury source to produce mercury test atmospheres of known concentrations. This is used to audit external ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
AM-5 air quality continuous online automatic monitoring system can real-time monitor concentration changes of SO2, NOx, O3, CO, particulate matter(PM2.5,PM10) and other conventional pollution factor. It can be integrated with serosols, VOCs, NH3, and halide(HF/HCL) according to customer's needs. Combined with the five-parameter analyzer(temperature, humidity,wind direction, wind speed and air ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran Model 1135 Particulate Mercury Module connects seamlessly to the top of the Model 1130 to continuously monitor ambient air particulate bound mercury (HgP), gaseous oxidized mercury (GOM) and gaseous elemental mercury (GEM). The complete Tekran 2537-1130-1135 Atmospheric Mercury Speciation System provides fully automated, unattended operation to determine all three mercury species ...
-
PremiumManufactured by Simple Solutions Distributing LLCbased in USA
The patented* 30LB Mega "T", is a T-style vent filter that comes standard with 30LBs (1.2 Cubic feet) of Darco H2S carbon. The 30LB Mega "T" utilizes our patented unique perforated disc carbon containment system with flow-through "moisture wicking" design for longer carbon bed life. This vent filter looks as good as it functions. The 30LB Mega "T" is available for 4", 6", 8,and 10" ...
-
PremiumDistributed by Interstate Products Inc. / Interstate Productsbased in USA
Non-flammable, penetrating spray that cuts through rust and corrosion to loosen frozen nuts and bolts. Leaves a never-dry residual film that lubricates and prevents further rust. Regular use helps assure free and easy movement of mechanical parts. Helps cut time on any maintenance or repair job. Includes extension tubes for easier application to remote ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
Glass fiber filter media is made from 100% micro-fine borosilicate glass fibers. Glass fiber filters are used where high flow rate and micron/sub-micron filtration is required. The filter media can be used for both liquid and air filtration. In the highest purity form, HI-Q offers a binderless “AE” grade glass filter media. With its’ excellent purity, using the FPAE-XX series ...
-
PremiumManufactured by Labconco Corporationbased in USA
Protector Controlled Atmosphere Glove Boxes provide a leak-tight environment to perform work with contamination-sensitive materials under vacuum or in an inert environment. Fiberglass-lined models are performance tested to maintain oxygen levels a low as 0.4 ppm and moisture levels as low as 2 ppm. Stainless steel-lined models are performance tested to maintain oxygen levels as low as 0.2 ppm and ...
-
PremiumManufactured by Synspec BVbased in NETHERLANDS
Nitrous oxide (N2O) is a man-made green house and ozone depletion gas. Emissions from agriculture are the main source, followed by industry and energy plants. Although the concentration of N2O in the atmosphere is relatively high (330 ppbv), the day and night fluctuations are small and so are seasonal differences. Therefore, highly sensitive and stable instrumentation is needed to monitor N2O ...
-
PremiumManufactured by ENVEAbased in FRANCE
Hybrid monitor utilizing ISO 10473 SRM Method & optical technology for Automatic & Real-Time measurement of PM10, PM2.5 and PM1 fine dust. The standard Beta gauge measurement Method ISO 10473 of the MP101M analyzer allows, when used with the patented optical technology of the OPM module, the continuous and simultaneous measurement of fine dust. Combination of both technologies provide a ...
-
PremiumManufactured by For.Tec. Forniture Tecnologiche S.r.l.based in ITALY
Crematory ovens mod. FT have been designed with an innovative technique which allows to maximize the cremation process, thanks to finest refractory materials and systems for heat recovery and reutilization which otherwise would be lost in the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you