Atmospheric Monitoring Equipment For Air And Climate In South Africa
-
ShowcaseManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran 2537 performs continuous long-term, unattended analysis of gaseous elemental mercury with unmatched accuracy, sensitivity, and reliability. The Tekran 2537 is easy to setup, use, and maintain and has long been known for its stable performance in rugged conditions. Our instruments have been installed at both Polar Regions, on ocean research vessels and hundreds of locations in between. ...
-
PremiumManufactured by Aerzener Maschinenfabrik GmbHbased in GERMANY
Universally applicable gas-tight booster solution with magentic coupling for oilfree conveying. Low-maintenance sealing concept, the separation between oil and process side is achieved by a special piston ring seal Design pressure of 7.0 bar (g) acc. to AD2000 / DIN EN 13445. 16 ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Mobile measurement system for discharge measurement in watercourses, such as rivers, streams and canals. The NivuFlow Stick is a mobile measurement system for discharge measurement in watercourses, such as rivers, streams and ...
-
PremiumManufactured by General Oceanics Inc.based in USA
Kit, Atmospheric Air PCO2 Kit includes 250 feet (85m) 3/8 inch (9.5mm) composite tubing, a rain guard and ...
-
PremiumManufactured by Synspec BVbased in NETHERLANDS
Nitrous oxide (N2O) is a man-made green house and ozone depletion gas. Emissions from agriculture are the main source, followed by industry and energy plants. Although the concentration of N2O in the atmosphere is relatively high (330 ppbv), the day and night fluctuations are small and so are seasonal differences. Therefore, highly sensitive and stable instrumentation is needed to monitor N2O ...
-
PremiumManufactured by General Oceanics Inc.based in USA
Kit, Atmospheric Air PCO2 Kit includes 250 feet (85m) 3/8 inch (9.5mm) composite tubing, a rain guard and connectors. Kit, Atmospheric Air PCO2 Kit includes 250 feet (85m) 3/8 inch (9.5mm) composite tubing, a rain guard and ...
-
PremiumManufactured by Flottweg SEbased in GERMANY
From algae harvesting to beer clarification and protein extraction: If you want to separate or purify liquids or remove ultra-fine particles you need strong and robust separators. With their enormous centrifugal acceleration of up to over 12,000 g, Flottweg separators are real purification and clarification all-rounders - highest quality made in Germany. Where decanter centrifuges reach their ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
With atmospheric test chambers it is not necessary to evacuate air before the test process. Test chambers of this construction type can be manufactured at significantly lower cost with a significantly larger volume than vacuum chambers. We build these chambers with a chamber volume of up to 50 m³ as standard. This allows for reliable testing of even larger units and ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
The APOA-370 continuously monitors atmospheric ozone concentrations using a cross flow modulated ultraviolet absorption method. The APOA-370 employs an independent, internal dry-method sampling device to achieve the highest levels of sensitivity and accuracy. The dry method, due to its minimal maintenance requirements and capability of continuously monitoring and instantaneously analyzing gases ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The FW1 is a Type E thermocouple with a 0.001 in. diameter. It measures atmospheric temperature gradients or fluctuations with research-grade accuracy. The FW1 is compatible with most Campbell Scientific data loggers, and it is often used in eddy-covariance ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The SkyVUE™8M Tactical LIDAR Ceilometer is ideal for quick tactical deployment (for permanent or temporary installation) for military or civilian applications in all climates. The ceilometer's robust construction requires minimal maintenance and enables continuous use and multiple deployments in the harshest of environments. Designed to be easily portable, the SkyVUE™8M has unique quick-deploy ...
-
Manufactured by Air Products and Chemicals, Inc.based in USA
PRISM membrane separators use asymmetric hollow fiber membrane technology to separate oxygen and nitrogen from compressed air. Atmospheric air contains 78% nitrogen, 21% oxygen, and 1% other gases. Through selective permeation, the oxygen molecules transport at a faster rate across the membrane than the slower nitrogen molecules. The oxygen-enriched product stream exits the membrane separator at ...
-
Manufactured by Eltra GmbH - part of Verder Scientificbased in GERMANY
The ELEMENTRAC ON-p determines oxygen and nitrogen in inorganic samples by inert gas fusion in an impulse furnace with temperatures in excess of 3,000 °C. The ELEMENTRAC ON-p guarantees precise and fast sample analysis. The analyzer covers a wide range of applications such as metal, ceramics and other inorganic materials. The ELEMENTRAC ON-p can be supplied with up to two infrared cells with ...
-
Manufactured by Krohne Messtechnik GmbHbased in GERMANY
The OPTIWAVE 6500 is a 2-wire 80 GHz radar (FMCW) level transmitter for demanding applications with powders in very dusty atmospheres. With its small beam angle, this radar is particularly suited for continuous, non-contact level measurement in high and narrow silos, hoppers or buffer storage containers up to 100 m / 328 ft. Due to specific algorithms and the high signal dynamics of the FMCW ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The FW05 is a Type E thermocouple with a 0.0005 in. diameter. It measures atmospheric temperature gradients or fluctuations with research-grade accuracy. The FW05 is compatible with most Campbell Scientific data loggers, and it is often used in eddy-covariance ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
HORIBA has been selling the XGT-WR series of EDXRF analyzers for many years, to providing screening measurements of samples containing hazardous elements such as Pb, Cd, Hg, Cr, Br, Sb, As for RoHS, ELV, and Cl for halogen free applications. XGT systems are used daily throughout the world. HORIBA has now developed the new MESA-50 EDXRF analyzer, based on its long experience with customer ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
The APHA-370 continuously monitors atmospheric THC, NMHC, and CH4 concentrations using a cross-flow modulated selective combustion type method combined with a hydrogen ion detection method. The APHA-370 employs an independent, internal dry-method sampling device to achieve the highest levels of sensitivity and ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The FW3 is a Type E thermocouple with a 0.003 in. diameter. It measures atmospheric temperature gradients or fluctuations with research-grade accuracy. The FW3 is compatible with most Campbell Scientific data loggers, and it is often used in eddy-covariance ...
-
Manufactured by Eltra GmbH - part of Verder Scientificbased in GERMANY
The ELEMENTRAC ONH-p determines oxygen, nitrogen and hydrogen in inorganic samples by inert gas fusion in an impulse furnace with temperatures in excess of 3.000 °C. The ELEMENTRAC ONH-p guarantees precise and fast sample analysis. The analyzer covers a wide range of applications such as metal, ceramics and other inorganic materials. The ELEMENTRAC ONH-p can be supplied with up to two ...
-
Manufactured by Windlab Systems Pty Ltd.based in USA
Wind resource modelling has its origins in the 1970’s. Since then much has changed in terms of the models used and the methods for wind data collection. However, one thing that has not changed significantly is the overall methodology used to create a high resolution wind map across a wind farm for the purpose of optimising turbine locations. Windlab has been working to develop a much more ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you