Atmospheric Particulate Equipment For Air And Climate Available In Latin America
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
DPF/SCR &ASC/DOC System Stationary Source ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
Inhalable particle content is one of the most important indexes for measuring air quality. Combining years of experience in developing environment and safety monitoring instruments as well as the latest demand at home and abroad, our company has launched a new generation DPM-6000 pm 2.5 measurement device with high accuracy, reliability, stability and economy. Our PM monitor can measure PM10, ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
Glass fiber filter media is made from 100% micro-fine borosilicate glass fibers. Glass fiber filters are used where high flow rate and micron/sub-micron filtration is required. The filter media can be used for both liquid and air filtration. In the highest purity form, HI-Q offers a binderless “AE” grade glass filter media. With its’ excellent purity, using the FPAE-XX series ...
-
PremiumManufactured by Innovation nilu ASbased in NORWAY
The NILU Particulate Fallout Collector and the NILU Precipitation Collector have been developed to collect representative samples of dry and wetatmospheric particulate fallout for subsequent analysis. The NILU Particulate Fallout Collector and the NILU Precipitation Collector have been developed to collect representative samples of dry and wet atmospheric particulate fallout for subsequent ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The HPD III Aerosol Monitoring Accessory is compatible with non-toxic, non-flammable gases such as Clean Dry Air (CDA), Argon, Nitrogen and Carbon dioxide. Sampling gases at pressures greater than sea level, such as 25 – 100 psi, is challenging for particle counters. Connecting pressurized air or gas to a particle counter can defeat its flowmetering system and possibly damage the ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
According to US EPA IO - 3.3 standard method of heavy metals, PMMS – 5000 uses XRF nondestructive testing technology and atmospheric automatic enrichment technology to realize the accurate measurementof atmosphere heavy metals such as lead, mercury, cadmium, chromium, arsenic, etc. It is widely used in environmental air quality monitoring place such as industrial pollution area, residential ...
-
PremiumManufactured by Innovation nilu ASbased in NORWAY
The Atmospheric Microplastic Collector has been developed to collect microplastics in deposition, minimizing contamination risks. Innovation nilu’s Atmospheric Microplastic Collector collects representative samples of dry and wet atmospheric particulate fallout for subsequent analysis. The collector is made from stainless steel to avoid contamination from the ...
-
Manufactured by Radiometer Physics GmbH (RPG)based in GERMANY
In 2016 Radiometer Physics GmbH has delivered the first RPG-FMCW-94 radar. This radar was developed for atmospheric research. It operates at 3.2 millimeter wavelength which allows for reaching high sensitivity with small sizes of the instrument. The radar provides range profiles of parameters that contain information about scatterers in the atmosphere such as cloud particles, raindrops, ...
-
based in GERMANY
The GRIMM 5520 aDBD aerosol neutralizer is based on an annular dielectric barrier discharge that produces a bipolar ionic atmosphere. Irregularly charged particles (from ambient or lab generated) are brought into a defined stationary-state charge distribution, regardless of their initial charging state. The aDBD was developed as alternative to established aerosol chargers / neutralizers since it ...
-
Manufactured by Comde-Derenda GmbHbased in GERMANY
The PNS T-DM combines a low / medium volume sampler (LVS or MVS) and a filter changer in a stainless steel cabinet. It collects fine particulate matter on sampling filters according to EN 12341:2014 (PM10 and PM2.5). For this purpose, a vacuum pump draws in ambient air, and the system fractionates the airborne particles in a sampling inlet. The air containing the desired fine particulate fraction ...
-
based in INDIA
WorldView-3 is the latest satellite sensor from DigitalGlobe. With the addition of this sensor to its satellite constellation (in addition to QuickBird, WorldView-1, GeoEye-1, Ikonos and WorldView-2), DigitalGlobe is capable of collecting ~1 billion square km of Earth imagery per year. DigitalGlobe has added a SWIR (Shortwave Infrared) sensing 8-band instrument to WorldView-3 satellite that will ...
-
Manufactured by TSI Incorporatedbased in USA
Making ultrafine particle measurements in compliance with the CEN standards requires the right tools. TSI offers a full solution that includes sampling, drying, and diluting the aerosol, as well as measurement of relative humidity and temperature, particle number concentration, and particle size ...
-
Manufactured by TEHAG GmbHbased in GERMANY
For use in areas with an explosive atmosphere. Spark arrestors trap particles using centrifugal force. Securely fitted blades on the inside of the system force the gas entering the system to rotate. The heavier particles (sparks) are thrown against the outside walls of the system and then collected in a trap.All TEHAG spark arrestors comply with the strictest ...
-
Manufactured by Cytivabased in USA
Cytiva’s Whatman EPM 2000 air filters are used in high-volume PM-10 sampling equipment. Manufactured from 100% pure borosilicate glass, they enable detailed chemical analysis of trace pollutants with minimal ...
-
Manufactured by Nanjing Shinkai Filter Co., Ltd.based in CHINA
There are two types of blowback cleaning methods for hot gas filters – the pressurized blowback, and the online venturi pulse blowback. With the pressurized blowback, it is necessary to isolate the filter from filtration process. With the venturi pulse blowback, the filter can remain on forward flow with no interruption of service. In industrial production, fuel gas shall be purified before ...
-
Manufactured by Surgically Clean Air Inc.based in CANADA
Ideal for heavy particulate atmospheres such as dental labs, medical labs, animal services, and light industrial ...
-
Manufactured by Rodrigue Metal Lteebased in CANADA
The Cyclofilter can operate under both positive and negative pressure. The particle-laden air enters the dust filter through a tangent inlet; the particles are centrifuged down to the cone section where they are continuously collected by a pneumatic or mechanical system. The finer dust is captured upward in the filtering section using filter bags. The clean air is returned to the plant or to the ...
-
Manufactured by SEIBOLD Wasser - Analysatorenfabrik GmbHbased in AUSTRIA
Natural sources. The element nickel is found at low levels 0.0099% in the earth’s crust and exists mainly in the form of sulfide, oxide and silicate minerals. Industry. Nickel is used in alloys (stainless steel), electroplating, foundries, catalysts, welding rods and coinage, and can be found in electronic equipment, construction materials, aerospace equipment and consumer goods such as ...
-
Manufactured by TCR-Tecorabased in ITALY
ECHO PM is a "stand alone" instrument projected also for outdoor operation in harsh climatic conditions. The wide regulation range and the accurate electronic flow sampling control at either actual or standard conditions, makes ECHO PM in accordance with the reference methods EN 12341 for PM 10 with head LVS PM10 2.3 m3/h, and US EPA 40 CFR part 50 for PM10 and PM2.5 at 1m3/h. Developed and ...
-
Manufactured by CleanTech Waterbased in INDIA
Side stream filters is very essential system for smooth operation and performance of cooling tower and heat exchangers. Side stream filter remove atmospheric impurities like dust, particles, suspended solids and reduce fouling and biological growth help to control the issue like corrosion & scaling and enhance the performance of cooling tower & heat exchanger. Our simple but well ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you