Only show results in Virginia? Ok

Bilge Monitoring Equipment

  • DECKMA - Bilge Alarm

    DECKMA is a global leader in bilge effluent monitoring. DECKMA was one of the first manufacturers to receive IMO resolution MEPC.107(49) approval for their OMD-2005 Bilge Alarm. Today DECKMA supplies to Bilge Separator manufacturers the newer version OMD-24, and for retrofitting of existing installations the OMD-24 and 2008. All systems are ...

    By Hermont Marine Inc. & Hermont Tech based in St Laurent, QUEBEC (CANADA). from Pollution Abatement Product line

  • JOWA - Model SeaGuard - 15ppm Bilge Alarm

    The JOWA SEAGUARD 15ppm Bilge alarm is designed to monitor the effluent from a bilge water separator. The alarm is approved to IMO MEPC 107(49).

    By JOWA based in Kållered, SWEDEN. from Monitoring and Control Systems Product line

  • Model TD-107 5.0 - 5 PPM Bilge Oil Content Monitor

    The TD-107 5.0 is the world's first and only DNV Clean Design Certified 5ppm Bilge Oil Content Monitor. The TD-107 5.0 is an extension of the highly successful TD-107 Oil Content Monitor for oily water separators, except with an added level of testing and certification for 5ppm applications by Det Norske Veritas' Clean Design program.

    By NAG Marine based in Norfolk, VIRGINIA (USA). from Oil Content Monitors Product line

  • Model TD-107 - 15 PPM Bilge Oil Content Monitor

    The TD-107 Fluorescence Oil Content Monitor (OCM) is a 15 ppm bilge alarm for oily water separators based on fluorescence detection technology. Fluorescence makes the TD-107 resistant to interferences by turbidity or particles and sediments in the bilge which impact competing 'light scatter' oil content monitors. Because silt, algae, iron oxide ...

    By NAG Marine based in Norfolk, VIRGINIA (USA). from Oil Content Monitors Product line

  • Deckma OMD-21 - Oil Water Monitor - 15ppm Bilge Alarm

    The OMD-21 Bilge Alarm Monitor was designed by Deckma Hamburg GmbH for use in conjunction with 15 ppm Oily Water Separator Systems. The performance and specifications of the OMD-21 comply with the International Maritime Organization (IMO) requirements described in Resolution MEPC.60 (33).

    By Mackay Communications, Inc. based in Raleigh, NORTH CAROLINA (USA).

  • Model OMD- 24 Series - Bilge Alarm System

    5ppm + 15 ppm Bilge Alarm according to IMO Resolution MEPC.107 (49)

    By Deckma Hamburg GmbH based in Hamburg, GERMANY. from Marine Product line

  • Model 15 ppm - Bilge Alarm Type BilgMon 488TM

    Petrik Naval has engineers to carry out the annual and 5th annual calibration, certification and verification, also troubleshooting and repair of Oily Water  Separator 15ppm Bilge Alarm Monitors. According to the new MEPC 107(49) compliant monitors, and the old MEPC 60(33) compliant monitors. Bilge Alarms for  the marine market, are ...

    By Petrik Naval based in PI Palmones, SPAIN.

  • JOWA - Condensation Water Monitor

    The JOWA SEAGUARD 15ppm Bilge alarm is designed to monitor the effluent from a bilge water separator. The alarm is approved to IMO MEPC 107(49).

    By JOWA based in Kållered, SWEDEN. from Monitoring and Control Systems Product line

  • Model MEPC 107 (49) - Smart Cell Bilge Alarm - Simultaneously Monitor

    IMO Resolution MEPC 107 (49) came into effect on 1st January 2005 and applies to all new installations of oil content monitors within engine room spaces. This applies to existing ships and ships whose keel was laid on or after 1st January 2005. The Rivertrace Smart-Cell Bilge Alarm meets the requirements of MEPC 107 (49) for the monitoring of ...

    By Rivertrace Engineering Ltd based in Redhill, UNITED KINGDOM. from Marine Applications Product line

  • Magnetic Drive Bilge Pumps

    These innovative pumps are specifically designed for exceptional durability and reliability. A magnetic drive, automatic bilge pump that clears airlocks, can run dry and won't burn-up if it gets clogged. If the impeller locks up, the magnets simply break free, protecting the motor from burnout. Solid-state controlled automatic float switch ...

    By SHURflo - Pentair based in Herentals, BELGIUM.

  • Fellow Kogyo - Focas-1800

    This advanced device FOCAS-1800 has been researched and developed by using the accumulated technology that was highly appraised as a result of sending out the oil concentration detector FOCAS 3 Series in the past. The FOCAS-1800 having unique high performance that was expected by users has been wining unstinted praise both in japan and in the ...

    By AMBIDETECTOR – Eng. & Instr. Ltd. based in Setúbal, PORTUGAL. from O.W.S 15 p.p.m Bilge Alarm Product line

  • Fellow Kogyo - FOCAS-2000

    This advanced device FOCAS-2000 has been researched and developed by using the accumulated technology that was highly appraised as a result of sending out the Oil Concentration Detector FOCAS 4 Series in the past.

    By AMBIDETECTOR – Eng. & Instr. Ltd. based in Setúbal, PORTUGAL. from O.W.S 15 p.p.m Bilge Alarm Product line

  • JOWA - Model DPS - Discharge Protection System

    JOWA Discharge Protection System, DPS, has the advantage to monitor and control the discharge of Bilge water to prevent any accidental oil discharge. All data is logged and stored for later printout or down load. This gives the operator full control over the discharge. The DPS is available as a add on option to the JOWA 3SEP 15ppm bilge water ...

    By JOWA based in Kållered, SWEDEN. from Monitoring and Control Systems Product line

  • Oil Content Monitor

    The OCD CM is the result of market research and development of new technologies to produce a monitor that exceeds the existing standards and meets the requirements requested by customers and operators worldwide. The OCD CM has been specifically designed to eliminate the effects that cause false instrument alarms where the water contains high ...

    By SkimOil Inc. based in Carrboro, NORTH CAROLINA (USA). from Marine Equipments Product line

  • Bilge - Model OVG-S - Alarm Switch

    Material: SUS 316 Stainless Steel. Length: Standard length is 4'. Use: This device is for detecting water level at the bottom of your boat. When water comes up to alarm leve, the buzzer wil sound. The housing, which can be conveniently disassembled and cleaned, can prevent foreign particles from obstructing the movement of the float.

    By Wema USA, Inc. based in Fort Lauderdale, FLORIDA (USA). from Switches Product line

  • Model RWO OWS-COM - Oily Water Separator

    More than 20,000 ships have already been equipped with RWO’s oily water separators since 1975. Like previous RWO Oily Water Separators, the OWS-COM uses a combination of a highly effective open porous coalescer with automatic backflushing, together with a second stage emulsion breaking oil and hydrocarbon polisher. The periodical ...

    By NAG Marine based in Norfolk, VIRGINIA (USA). from Oily Water Separators Product line

  • Bilge Alaram

    Bilge Alarms for the marine market, are designed to measure the oil content in contaminated bilge water, in accordance with the MARPOL regulations. The 15 ppm Bilge Alarm type BilgMon 488TM, is designed to meet and is certified in accordance with the new IMO resolution MEPC.107(49). The oil content is often measured by the use of scattered ...

    By OTS Group Ltd based in Sandefjord, NORWAY.

  • OOPS Filter Overboard Oil Protection System

    The simple flow thru OOPS filter works with any bilge pump and automatically removes oils from your bilge water. This OOPS filter system uses the same organoclay filter media that we use on the BRUTE/ B USCG/ABS/BV certified separators. We can rack up 3 or more OOPS filter cartridge housings and mount a 2005 USCG approved oil content monitor ...

    By SkimOil Inc. based in Carrboro, NORTH CAROLINA (USA). from Marine Equipments Product line

  • Brace & Leg Leak Detection System

    Our Brace & Leg Leak, Void Detection System System offers a continuous automatic monitoring of a vessel’s watertight integrity. High level redundancy along with SIL approved sensors combine to ensure a highly effective and reliable system. Leak Detection Sensors can be easily retro fitted into Braces, Bilge Pots or Void Spaces to monitor ...

    By Monitor Systems Scotland Limited based in Aberdeen, UNITED KINGDOM.

  • Ballast Control and Tank Gauging Systems

    Monitor System's Ballast Control and Tank Gauging System enables marine vessel operators to use reliable informative data to critically and safely manage the ballast and trim of a vessel according to operational needs, deck loading and sea conditions.

    By Monitor Systems Scotland Limited based in Aberdeen, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you