Bilge Alarm Equipment
-
Distributed by Hermont Marine Inc. & Hermont Techbased in CANADA
DECKMA is a global leader in bilge effluent monitoring. DECKMA was one of the first manufacturers to receive IMO resolution MEPC.107(49) approval for their OMD-2005 Bilge Alarm. Today DECKMA supplies to Bilge Separator manufacturers the newer version OMD-24, and for retrofitting of existing installations the OMD-24 and 2008. All ...
-
Manufactured by Deckma Hamburg GmbHbased in GERMANY
5 ppm + 15 ppm Bilge Alarm according to IMO Resolution MEPC.107 ...
-
Manufactured by KUS USA, INCbased in USA
OVG is used for detecting the water level at the bottom of your boat. When water comes up to alarm, the buzzer will sound. The housing, which can be conveniently disassembled and cleaned, prevents foreign particles from interfering with the float’s ...
-
Manufactured by Deckma Hamburg GmbHbased in GERMANY
The OMD-24 Bilge Alarm Unit has been designed specifically for use in conjunction with 15 ppm oil-water separator units and has a specification and performance which exceeds the requirements of the International Maritime Organization specifications for 15ppm Bilge Alarms contained in Resolution MEPC. 107 ...
-
Manufactured by HSN-Kikai Kogyo Co., Ltd.based in JAPAN
Measuring oil concentration in the treated water of engine room bilge with high precision. It monitors and controls the oil concentration when bilge (Note 1) is discharged from the engine room after being treated by a bilge separator to sea if the discharged bilge satisfies the specified limits by the International Convention for ...
-
Manufactured by UC Marine (China) Co., Ltdbased in CHINA
15 ppm Bilge Alarm Monitor serves to continuously measure the concentration of oil in the bilge and other waste water produced on a ship, and produces an alarm signal when the oil concentration exceeds 15 ...
-
Manufactured by Shanghai Mutao Environmental Technology Co.,Ltdbased in CHINA
This device can be used to treat oily bilge water in order to make it reach the requirements of IMO.MEPC.107 (49) resolution, which is also called 15ppm bilge separator. It contains type approved 15ppm bilge water separator,15ppm bilge alarm and automatic shut down ...
-
Manufactured by Deckma Hamburg GmbHbased in GERMANY
Bilge Alarm has to be provided with a representative sample, i.e. the operator of the instrument is responsible to maintain a proper sample flow through the instrument. The recommended sample flow rate for Deckma instruments is approx. 2 Liters per Minute. At this flow rate, with a common setup of separator and 15ppm Bilge ...
-
Manufactured by Deckma Hamburg GmbHbased in GERMANY
The TMD-90 Turbidity Monitoring Device has been designed specifically for measurement of turbidity (NTU) in water. The TMD-90 has been constructed using technology of the DECKMA HAMBURG OMD series industrial instruments and 15ppm Bilge Alarm Monitors, that have a specification and performance which exceeds the requirements of the ...
-
Manufactured by Deckma Hamburg GmbHbased in GERMANY
The OMD-32 Oil-in-Water Monitor has been designed specifically for use in conjunction with oil-water separator units. The OMD-32 has been constructed using technology of the DECKMA HAMBURG OMD series industrial instruments and 15ppm Bilge Alarm Monitors, that have a specification and performance which exceeds the requirements of the ...
-
Manufactured by NAG Marinebased in USA
The TD-107 Fluorescence Oil Content Monitor (OCM) is a 15 ppm bilge alarm for oily water separators based on fluorescence detection technology. Fluorescence makes the TD-107 resistant to interferences by turbidity or particles and sediments in the bilge which impact competing 'light scatter' oil content monitors. Because silt, algae, iron ...
-
Manufactured by Rivertrace Ltdbased in UNITED KINGDOM
factory calibration to PSC Surveyors. The Smart Cell Bilge Alarm is readily available as a 5ppm version if required. It can also be tailor made for Hazardous Environments (Zone 1 & 2) as an Exd system with Auto Clean, all enclosed in an explosion proof ...
-
Distributed by Hermont Marine Inc. & Hermont Techbased in CANADA
The SKIT/S-DEB Bilge separator complies with IMO Resolution MEPC.107(49). The Skit/S-DEB combines the efficient open porous coalescer with a second stage emulsion breaking oil and hydrocarbon polisher to achieve consistent and reliable performance. Periodic back flushing assures coalescer efficacy for long lasting, maintenance free ...
-
by Jowa ABbased in SWEDEN
Jowa Oily Water Separator is available in five different capacities; 0.5 m3/h, 1.0 m3/h, 2.5 m3/h, 5.0 m3/h and 10.0 m3/h. The skid is optimised so that the footprint of the 3SEP OWS is as small as possible. The 1m3/h model pictured has a footprint of only 950 x ...
-
Manufactured by NAG Marinebased in USA
The TD-107 5.0 is the world's first and only DNV Clean Design Certified 5ppm Bilge Oil Content Monitor. The TD-107 5.0 is an extension of the highly successful TD-107 Oil Content Monitor for oily water separators, except with an added level of testing and certification for 5ppm applications by Det Norske Veritas' Clean Design ...
-
Manufactured by Rivertrace Ltdbased in UNITED KINGDOM
By utilising the “Smart Cell” Detector Array Technology, developed by Rivertrace, the monitor accurately analyses the quality of the sample stream and outputs the turbidity value in nephelometer turbidity units (NTU) Turbidity is the cloudiness or haziness of a fluid caused by large numbers of individual particles. A manual cell cleaning device is included as standard to easily enable ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you