Bilge Monitor Equipment
-
Manufactured by UC Marine (China) Co., Ltdbased in CHINA
15 ppm Bilge Alarm Monitor serves to continuously measure the concentration of oil in the bilge and other waste water produced on a ship, and produces an alarm signal when the oil concentration exceeds 15 ...
-
Manufactured by RWO GmbH Marine Water Technologybased in GERMANY
The Clean Bilge Monitoring system CBM+ is designed to monitor and control liquid discharges overboard your vessel in respect of its oil content. The system prevents the discharge of non-compliant oily water mixtures by automatically recirculating the liquid to the bilge water tank if the oil content is above a predetermined ...
-
Manufactured by NAG Marinebased in USA
The TD-107 5.0 is the world's first and only DNV Clean Design Certified 5ppm Bilge Oil Content Monitor. The TD-107 5.0 is an extension of the highly successful TD-107 Oil Content Monitor for oily water separators, except with an added level of testing and certification for 5ppm applications by Det Norske Veritas' Clean Design ...
-
Manufactured by Rivertrace Ltdbased in UNITED KINGDOM
as a leading cause of monitor malfunction or incorrect reading. By simple operation of the manual cleaning device, the “Smart Cell” remains in optimum operating condition. Replacement calibrated measuring cells can be purchased for easy change over on board the vessel and calibration check kits enable the crew to demonstrate the monitor is ...
-
Manufactured by NAG Marinebased in USA
The TD-107 Fluorescence Oil Content Monitor (OCM) is a 15 ppm bilge alarm for oily water separators based on fluorescence detection technology. Fluorescence makes the TD-107 resistant to interferences by turbidity or particles and sediments in the bilge which impact competing 'light scatter' oil content monitors. Because silt, ...
-
Manufactured by HSN-Kikai Kogyo Co., Ltd.based in JAPAN
Measuring oil concentration in the treated water of engine room bilge with high precision. It monitors and controls the oil concentration when bilge (Note 1) is discharged from the engine room after being treated by a bilge separator to sea if the discharged bilge satisfies the specified limits by the ...
-
PremiumManufactured by VEGA Americas, Inc.based in USA
Application area: It detects the limit level reliably and with millimetre accuracy directly at the mounting position. Small level switch version with stainless steel housing. The VEGASWING 51 is a universal level switch with small dimensions for use in liquids. Independent of the mounting position, it detects reliably with millimetre accuracy the limit level. The instrument can be used as empty ...
-
Distributed by Hermont Marine Inc. & Hermont Techbased in CANADA
DECKMA is a global leader in bilge effluent monitoring. DECKMA was one of the first manufacturers to receive IMO resolution MEPC.107(49) approval for their OMD-2005 Bilge Alarm. Today DECKMA supplies to Bilge Separator manufacturers the newer version OMD-24, and for retrofitting of existing installations the OMD-24 and 2008. All ...
-
Manufactured by Deckma Hamburg GmbHbased in GERMANY
The TMD-90 Turbidity Monitoring Device has been designed specifically for measurement of turbidity (NTU) in water. The TMD-90 has been constructed using technology of the DECKMA HAMBURG OMD series industrial instruments and 15ppm Bilge Alarm Monitors, that have a specification and performance which exceeds the requirements of the ...
-
Manufactured by Deckma Hamburg GmbHbased in GERMANY
The OMD-32 Oil-in-Water Monitor has been designed specifically for use in conjunction with oil-water separator units. The OMD-32 has been constructed using technology of the DECKMA HAMBURG OMD series industrial instruments and 15ppm Bilge Alarm Monitors, that have a specification and performance which exceeds the requirements of the ...
-
Manufactured by SkimOil, LLCbased in USA
The OCD CM is the result of market research and development of new technologies to produce a monitor that exceeds the existing standards and meets the requirements requested by customers and operators worldwide. The OCD CM has been specifically designed to eliminate the effects that cause false instrument alarms where the water contains ...
-
Manufactured by Advanced Sensors Ltd. - part of PAC L.P.based in UNITED KINGDOM
. The SA is ideally suited for marine, industrial and waste water oil in water monitoring. In addition to the SA-100 features, the SA-1000 model offers spectral ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you