Building Ventilation Equipment For Air And Climate Available In New Jersey
-
PremiumManufactured by Daliform Group Srlbased in ITALY
Disposable, horizontally adjustable formworks for creating ventilated cavities. Iglù® Smart is the innovative disposable formwork which is both vertically and horizontally adjustable in plan, to facilitate the creation of ventilated cavities that offer even greater flexibility than normal formworks. Iglù® Smart‘s unique, innovative configuration and special interlocking system with ...
-
PremiumManufactured by Daliform Group Srlbased in ITALY
Disposable formworks for the simultaneous casting of foundation beams and the slab. Cassaforma Muro (Wall formwork) was designed as an alternative to traditional wood shuttering, which permits casting walls at a height, reversed beams and foundation bases, drastically reducing the time for creating the foundation. This disposable formwork consists of a combination of pipes, panels, collars and ...
-
PremiumManufactured by Daliform Group Srlbased in ITALY
Disposable formwork to effectively handle the movements of clayey soils and protect floors from shrinkage/swelling. With foundation problems in clayey soils, conditions which facilitate a “proactive” approach with regard the soil rarely occur within the scope of the project. In most cases, the structure is designed and its behaviour is then anticipated as a function of the mechanical ...
-
PremiumManufactured by Daliform Group Srlbased in ITALY
U-Bahn Beton is a modular formworks in recycled polypropylene that was specifically designed to create one way slabs that are cast on site or semi-prefabricated. The various modules, which overlap on the edges, make it possible to create beams of any length. Thanks to its conic elevator feet, immersing the U-Bahn® Beton formworks in the concrete casting will obtain thick, parallel beams that ...
-
PremiumManufactured by Testo, Inc.based in USA
The testo 510i Smart Probe is a wireless differential pressure probe used for accurate low-pressure measurements. The testo 510i is great for measuring pressure in manifolds, static pressure, and pressure drops in buildings or ventilation systems. Use it to measure the pressure drop across coils and filters, or in ducts and ...
-
PremiumManufactured by Daliform Group Srlbased in ITALY
Atlantis Tank is the patented system to create tanks cast on site for the collection or the dispersion of large volumes of water in a small space. The reinforced concrete structure achievable through the Atlantis Tank system consists of a slab, perimeter walls, and a slab supported by small pillars; the structure thus formed, guarantees high resistance to overload, both permanent and ...
-
PremiumManufactured by Daliform Group Srlbased in ITALY
Iglù® is a market leading product that was created and patented for the realisation of sanitary spaces, ventilated cavities, under-floor cavities, ventilated floors and roofs during the construction and restructuring of civil and industrial buildings. This result of an ingenious idea dating back to 1993 considerably improved building methods. The innovative capacity of ...
-
PremiumManufactured by Daliform Group Srlbased in ITALY
Sistema Atlantis (Atlantis System) is an advanced system for creating cavities in general, under-floor cavities and ventilated floors in newly constructed or restructured civil and industrial buildings, accumulation tanks, dispersion tanks, honeycomb rafts, low temperature cold ...
-
Manufactured by Bahnson Environmental Specialties, LLC. (BES)based in USA
Designed for the cold and warm extremes typically found in today’s bio-pharmaceutical operations, our HEPA-filtered FAS Series can maintain temperatures from -20C to +40C. The chambers offer close tolerance temperature and humidity uniformity, as well as an assurance of a certified cleanroom environment with minimum airborne particulates and microorganisms. The result is consistently ...
-
Manufactured by Salare, Inc.based in USA
The Maelstrom™ range of fume hood scrubbers has been specifically designed to reside inside laboratory fume hoods and is therefore kept as simple and compact as possible. The patented technology employed by Maelstrom™ Scrubbers is the same as the technology used on the larger range of industrial scrubbing systems that are commonly supplied to the chemical and pharmaceutical ...
-
Manufactured by Wastech Controls & Engineering, Inc.based in USA
Chemicals are commonly used in manufacturing and various processes, and the handling and storage of all types of chemicals is a concern for operators as well as facility managers. If you are looking for a safe and efficient low-cost solution to collect and store these non-flammable or other hazardous liquids, Wastech has the solution for ...
-
Manufactured by Kappa Filter Systems GmbHbased in AUSTRIA
The Kappa Wavebionix is a new and innovative nano-filter element for ventilation units. It can be easily installed in ventilation units as an alternative to conventional pocket filters without any modifications. The Kappa Wavebionix is highly effective in separating pathogens and pathogenic substances such as viruses, bacteria, fine and ultra-fine dust, aerosols, soot particles, brake dust, ...
-
Manufactured by Teracom Ltd.based in BULGARIA
TST100 is a 1-Wire temperature sensor with -40 to +85°C working range and IP65 protection. TST100 is a 1-Wire temperature sensor. The sensors can be used outdoor because of its IP protection. The temperature sensor integrates a band-gap temperature sensor element as well as signals processing for a fully calibrated digital output. Used digital signal processing allows accuracy as low as ...
-
Manufactured by ABC Industries Incbased in USA
Conventional Weft-Insertion Knitted Scrim: Excellent for brattice and flexible ducting applications. Laminated PVC film substrate which results in a strong low-maintenance, fire resistant ...
-
Manufactured by GD Waldner India Pvt. Ltd.based in INDIA
GD Waldner offers Secuflow fume cupboards, a new laboratory fume hood range that pushes the boundaries of energy efficiency and safety. With availability for rear wall installation, new design widths, and a larger internal workspace, every element of the Secuflow range of fume chambers has been designed considering lab users. These cutting-edge fume chambers are manufactured in and imported from ...
-
Manufactured by XPESbased in CHINA
Surface disinfection usually refers either to the disinfection of building and ventilation system internal surfaces or (and in our view more commonly) the disinfection of equipment and material surfaces such as dental and medical ...
-
Manufactured by Plasma Clean Air Ltd.based in UNITED KINGDOM
The TechniKlean UVGI disinfects your building ventilation system and improves your indoor air quality. Designed for continuous operation, this retrofit solution can be installed in new and existing ductwork. Maintenance is only required on an annual basis keeping ongoing costs to a ...
-
Manufactured by Muntersbased in USA
DF 2100 is a ready-to-install droplet separator for use in many application areas. It is available in various material combinations and configurations to fit a wide range of operating conditions. DF 2100 droplet separator provides high efficiency droplet separation and low pressure drop, even at high face velocity, for energy saving operation. The droplet separator can be configured to most ...
-
Manufactured by JIANGXI HITO SILICONE MATERIALS CO.,LTDbased in CHINA
A-312 Has good permeability, waterproof, etc., can penetrate the substrate to form a three-dimensional long hydrophobic silicone resin network structure without forming layer on the base surface, the surface does not change the color of the building, does not affect the building's ventilation sex. Chemical resistance, aging resistance and abrasion resistance, excellent protection long life. ...
-
Manufactured by Air Impurities Removal Systems, Inc.based in USA
The build-up of heat, dust, smoke, oil mist, and dirt can be harmful to electrical and electronic devices. Overheating and dirt accumulation can decrease the life expectancy of costly electrical and electronic ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you