Only show results in Texas? Ok

Calibration Gas equipment for Air and Climate

  • Premium

    Envea - Model SM-4 - Continuous Mercury Emissions Analyzer

    Mercury Instruments (Environnement S.A Group) has developed the SM-4 analyzer specifically for total mercury emission monitoring applications in order to measure very low levels of mercury in flue gases as well as complex matrices (SO2, NOx, HCl, etc.) with high accuracy and reliability.

    By ENVEA based in Poissy, FRANCE. from Continuous Mercury Emissions Analyzer Product line

  • Premium

    Thermox - Model WDG-V - Combustion Analyzer

    The reliable identification of low combustion oxygen in a fired heater or boiler has always been critical to the effectiveness of the Burner Management System for proper control and safety. Low emission burners and aggressive firing control points to achieve increased efficiency and emission reductions have driven the industry to tighter control ...

    By Ametek Process Instruments - THERMOX based in Pittsburgh, PENNSYLVANIA (USA). from Combustion Analyzer Product line

  • Premium

    THERMOX - Model PreMix 2000 - Analyzer

    The THERMOX PreMix 2000 analyzer accurately and continuously measures the proportions of oxygen and fuel in pre-mix gases, operating in either excess fuel or excess air conditions.  The analyzer is fed a small sample of the air/fuel mixture burning it and them measuring the next oxygen or next excess fuel content of the mixture.

    By Ametek Process Instruments - THERMOX based in Pittsburgh, PENNSYLVANIA (USA). from Analyzer Product line

  • Premium

    IMR - Calibration Gas Kit

    Standard features of the kit include; Calibration hose. Carrying case with shoulder strap (58 liter size only). Regulator for disposable calibration gas cylinder, stainless steel, fixed flow rate 1.5 liter/min.

    By IMR Environmental Equipment, Inc. based in St. Petersburg, FLORIDA (USA). from Calibration Gas Kit Product line

  • Custom Built Flow Control Panels

    PACE will custom build a flow control panel to your exact specifications. The flow panel on the top right consist of one sample in and five out with a bypass. Also monitored are sample vacuum and sample pressure. The switches allow calibration selection, calibration point (bias or external), sample, calibrate, exhaust, and off.

    By PACE Environmental based in Whitehall, PENNSYLVANIA (USA). from Custom Built Flow Control Panels Product line

  • Model GC-IMS-ODOR - Fully Automated Standalone Instrument

    The GC-IMS-ODOR is a fully automated, standalone instrument developed for at-site, on-line sampling and delivers quantification and reporting of Gasodor-S-Free (methyl acrylate and ethyl acrylate) and THT concentrations in natural gas.

    By Imspex Diagnostics Ltd. based in Abercynon, UNITED KINGDOM.

  • Dynacalibrator - Model 150 - Calibration Gas Generators

    At only 6' wide x 15' deep x 7' high and 10.5 pounds, the Dynacalibrator 150 is a compact, full-featured calibrator capable of delivering the precise concentrations you require. A passivated glass-coated permeation chamber houses the permeation device(s), with measured inert carrier gas sweeping the calibration gas/vapor from the chamber. The ...

    By VICI Metronics, Inc. based in Poulsbo, WASHINGTON (USA). from Calibration Gas Generators Product line

  • Dynacalibrator - Model 230 - Calibration Gas Generators

    With a flexible flow metering system to maintain a constant carrier flow through the permeation chamber, the Model 230 allows the dilution flow to be varied over a wide range, generating the spectrum of concentrations required for checking analyzer linearity. Like all Dynacalibrators, its large permeation chamber is big enough to accomodate ...

    By VICI Metronics, Inc. based in Poulsbo, WASHINGTON (USA). from Calibration Gas Generators Product line

  • Dynacalibrator - Model 340 - Calibration Gas Generators

    switch to select among zero, span, or remote calibration modes. In the zero mode, scrubbed air is delivered to the stream outlet. In the remote mode, the Model 340 can be externally programmed to deliver a zero and a span reference on command.

    By VICI Metronics, Inc. based in Poulsbo, WASHINGTON (USA). from Calibration Gas Generators Product line

  • Model P1879 - Gas Calibration Kits

    CONSPEC’s Calibration Gas Kit was designed to keep everything you required to calibrate your gas monitor and detector in one easy to carry case. All gas monitors must be calibrated on a regular basis. These kits contain everything essential for the quick and accurate calibration of CONSPEC and other type of gas monitors and detectors. ...

    By Conspec Controls Limited based in Burlington, ONTARIO (CANADA). from Gas Calibration Kits Product line

  • ETG - Model Cal2000 - Calibrator

    The Cal 2000 provides unmatched versatility and accuracy in calibration gases. Field replaceable calibration gas sources (generating cells) provide a calibration standard for accurately testing Chlorine,Chlorine Dioxide, Hydrogen, Hydrogen Cyanide, and Hydrogen Sulfide gas detectors with a single instrument.

    By ETG Risorse e Tecnologia S.r.l. based in Montiglio, ITALY. from Calibrator Product line

  • Model PD-1B - Calibration Gas Generating Equipment

    The Permeater is a gas generator for calibration purposes that utilises permeation and diffusion tubes to generate the calibration gas. When the permeation and diffusion tubes are set at a constant temperature, the weight of both the permeating and the evaporating diffusion gas will be respectively set at constant levels. In this manner, ...

    By Gastec Corporation based in Kanagawa, JAPAN.

  • Calibration Gas

    These cost effective cylinders are filled with certified precision gas mixtures for calibration and response check “bump testing” of gas leak detectors or research instrumentation. “Home made” chlorine gas is uncontrollable as well as dangerous. The high concetration of chlorine in a 150 lb process cylinder is lethal to ...

    By Foxcroft Equipment & Service Co. Inc. based in Glenmoore, PENNSYLVANIA (USA). from Calibration Gas Product line

  • HORIBA - Model 510 Series - Gas Analyzers

    The 510 series of general-purpose gas analyzers provide continuous monitoring of concentrations of the specific sample gas. The analyzers can be operated from controls on the front panel or by commands from a remote computer. Measurement results are displayed on the front panel and are available to remote data logging systems through an ...

    By HORIBA Europe GmbH based in Leichlingen, GERMANY. from Gas Analyzers Product line

  • VapourCalibrator - Calibration Gas Generator

    The VapourCalibrator is used in R&D laboratories, where special gas atmospheres are necessary, usually consisting of a zero gas as nitrogen or air, additional gaseous components as carbon dioxide, carbon monoxide, oxygen or hydrogen and vapour components of either water ( humidity ) or organic liquids ( solvents ) as alcohols, ethers or ...

    By QCAL Messtechnik GmbH based in Oberostendorf, GERMANY.

  • Liquid Tech - Specialty Gases

    Liquid Tech Corp Specialty Gases & Equipment manufacturer, Specializes in manufacturing high accuracy specialty and calibration gas standards to OEM specifications that are traceable to NIST standards. Low Cost, fast turn-around, and great service. Based in Houston, TX and Apopka, FL. Specialty gases are manufactured using state of the art ...

    By Liquid Technology Corporation based in Apopka, FLORIDA (USA).

  • Model DSX - Docking Station

    The DSX Docking Station easily maintains the gas detectors that keep your people safe in hazardous environments.

    By Industrial Scientific Corporation based in Pittsburgh, PENNSYLVANIA (USA). from Docking Station Product line

  • Model 960AMF - Digital Calibration Gas Generator

    Laboratory: Stand alone.Process: fully integrated.A portable, fully automated, mutli-compound calibration gas generator that provides the user maximum flexibility and accuracy when creating calibration blends. This dynamic unit can also be fully integrated in your process analyzer at the time of your analyzer purchase, a feature many regard as ...

    By C.I. Analytics based in Chambly, QUEBEC (CANADA). from Digital Calibration Gas Generator Product line

  • Model GSE 401 - Gas Sensor for Detection of Oxygen O2

    The principle of the measurement cell used is based on the diffusion of oxygen. The O2 diffuses through the gas-permeable diaphragm onto the gold cathode, and is reduced on it. The current flowing between the electrodes is proportional to the concentration, and will then be amplified and be led to the evaluation device by the transmitter. The ...

    By Kimessa AG based in Zurich, SWITZERLAND. from Gas Sensor for Detection of Oxygen O2 Product line

  • Owlstone - Model V-OVG - Calibration Gas Generator

    The Vertical Owlstone Vapor Generator (V-OVG) builds on Owlstone's proven OVG technology. The V-OVG platform features an innovative new oven design. The larger, vertically mounted chamber allows the use of multiple, physically large or specialist permeation devices.

    By Owlstone Nanotech, Inc. based in Norwalk, CONNECTICUT (USA). from Calibration Gas Generator Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you