Calibration Gas Equipment For Air And Climate Available In Bhutan
-
ShowcaseManufactured by EMC Hycal Limitedbased in UNITED KINGDOM
Probe longevity: 100 measurements typical, 20 hours continuous immersion. Response time: 5 minutes to stable result, response time less than 2 seconds. Footprint: approx. 1/2 volume, approx. 1/2 weight. Operating expense: 3x lower running cost, reduced degassing ...
-
ShowcaseManufactured by Quantek Instruments, Inc.based in USA
The Quantek Model 902D is a benchtop oxygen and CO2 headspace analyzer, primarily used for gas flushed food packages. Achieve accurate oxygen and carbon dioxide measurements in 20-25 seconds. This headspace analyzer contains an internal pump to draw in sample from your package and display O2 and CO2 concentration results in 30 seconds. The expected oxygen sensor life is typically 5 years, unlike ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The multipoint multigas calibrator SONIMIX 6000C1 is an instrument designed to calibrate manually or by remote control up to 5 gas monitors installed in an Air pollution monitoring station, such as SO2, HC or BTX, CO, NOx and O3. With the optional Ozone generator and GPT circuitry it is possible to verify the coherence of NO, NO2 and O3 analysers, and to determine the converter’s efficiency ...
-
PremiumManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
Analyzer for Oxygen Measurements: Gasmet oxygen analyzer is designed for continuous oxygen measurement of wet or dry flue gas. This extractive analyzer is suitable for various industrial applications where reliable and accurate oxygen measurement is ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
microVOC is a compact VOC analyzer which allows continuous and realtime qualification and quantification of benzene, toluene, ethylbenzene, xylene and other VOC on demand. User friendly. Compact size and low weight. Deployment in less than 5 minutes. Powered by mains or battery. Low consumption of carrier gas. Rapid calibration with gaseous BTEX mixture or only Toluene. Compatibilty with ...
-
PremiumManufactured by Umwelttechnik MCZ GmbHbased in GERMANY
The calibration system serves the mandatory zero and end point verification of gas analyzers, especially those in automated measuring networks. The zero and end points are verified with a signal from the measuring network computer; the calibration can also be activated with the keyboard at the front of the ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
An all in one solution including dual combined autoGCs FID: airmoVOC C2C6 and airmoVOC C6C12. This solution is provided worldwide for ozone precursors monitoring in ambient air. The airmOzone utilizes the airmoVOC C2-C6 and an airmoVOC C6-C12 with FID to monitor ...
-
PremiumManufactured by Umwelttechnik MCZ GmbHbased in GERMANY
Mix your gases now. The intuitive touch display guides you through the settings. Place up to 10 different recipes and call them with a "touch". You do not need any previous knowledge or external PC software. Incorrect operation? Impossible! Another plus: as a mobile variant, the EasyCal is no bigger than a make-up ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
The ATP-300B is a compact, lightweight and integrated high performance infrared spectrometer based on Fourier transform technology. The product consists of a light source, interferometer and detector. The spectrometer adopts a double hollow corner reflector with double pendulum design,which has the advantages of permanent alignment, good anti-vibration and anti-thermal effect; The detector is an ...
-
PremiumManufactured by ECO Physics AGbased in SWITZERLAND
The nCLD 844 Mhr analyzer is the next generation in two-channel high precision nitrogen oxide measurement. Unique in speed and reliability, the nCLD 844 Mhr is modular designed and capable of simultaneously measuring NO, NO2 and NOX from hot and humid gas sources without additional cooler. The new and intuitive graphical user interface “GUI“ also individually displays and connects to ...
-
PremiumManufactured by Synspec BVbased in NETHERLANDS
Synspec supplies the HYDRO50R product line of High Purity Hydrogen Generator modules for FID and CARRIER GAS for GC, to fit almost any type of application which needs H2 production close to the consumer. Based on the field proven Solid Polymer Electrolyte (PEM) cell technology, pure Hydrogen is produced at low pressure from electricity and high quality distilled water (ZEROWATER). This process ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The Model VE 222 is an efficient, all heated and low pressure drop 2-stream sample sequencer, filter and interface for removing solids from two gaseous sample streams. The Model VE 222 utilizes two independent permanently installed all stainless steel mesh sample filters and two independent all stainless steel sample valves in a thermostatic controlled oven to prevent the loss of high molecular ...
-
PremiumManufactured by Environics, Inc.based in USA
The Environics® Series 4040 is a computerized gas dilution system that automatically generates precise gas standards for rapid multi-point calibration of analyzers. The gas mixes can be used in generating precise gas calibration standards, creating gaseous atmospheres or producing gas mixes for analytical research or production purposes. The Series 4040 can produce gas concentrations from ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The multigas calibrator with GPT, ozone and self re-generable zero air generator, Sonimix 3012/3022, is an instrument designed to calibrate manually or by remote control up to 6 monitors installed in an air pollution monitoring station, such as SO2, HC, BTX, CO, NOx and O3. ...
-
PremiumManufactured by ENVEAbased in FRANCE
The MGC101 system automatically performs zero, precision, span and multi-point calibrations using NO, NO2, SO2, CO, 03, hydrocarbons and other gases. The MGC101 system automatically performs zero, precision, span and multi-point calibrations using NO, NO2, SO2, CO, 03, hydrocarbons and other gases of interest. It meets all U.S. environmental protection agency ...
-
PremiumManufactured by Cerex Monitoring Solutions, LLC.based in USA
Real-time laboratory quality measurements within a portable package. A true multi-gas analyzer, the Micro FTIR standard gas detection libraries are built for common applications, including: air toxics monitoring, hospital and anesthetic gas monitoring , and refinery monitoring. The Micro FTIR is also capable of simultaneous monitoring of more than 350 compounds in Cerex’s FTIR library. ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The multigas Sonimix 6000 C2 calibrator is designed to calibrate manually or by remote control up to 6 monitors installed in an air pollution monitoring station, for parameters such as SO2, HC, BTX, CO, NOx and O3. The Sonimix 6000 C2 includes Mass Flow Controllers, GPT, ozone and self re-generable zero air generator and is equipped with – an inlet for high concentration mixtures of diluted ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
The TRSMEDOR is an automatic and isothermal gas chromatograph dedicated to sulfur compounds analysis (H2S, mercaptans and sulphides) in different matrices. Two versions exist : the TRSMEDOR ppm which measures at ppm levels and the TRSMEDOR ppb which measures at ppb ...
-
PremiumManufactured by Quantek Instruments, Inc.based in USA
The Q3 is a portable CO2 analyzer, used for incubator measurement and other scientific applications. It weighs only 2 lbs, and comes with rechargeable batteries, sample probe, charger, and accessories to begin sampling. There is also a TSA approved hard carry case for easy portability and protection ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The J.U.M OVF-3000 Portable Heated Total Hydrocarbon Analyzer is a light weight, over the shoulder portable heated FID analyzer to continuously measure the total concentration of hydrocarbons within a gaseous sample. This can be ambient air, exhaust gases from a combustion process e.g. stack emissions, from any type of an industrial vent, from an internal combustion engine, or from any other ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you