Calibration Gas Equipment For Air And Climate Available In Congo
-
ShowcaseManufactured by EMC Hycal Limitedbased in UNITED KINGDOM
Probe longevity: 100 measurements typical, 20 hours continuous immersion. Response time: 5 minutes to stable result, response time less than 2 seconds. Footprint: approx. 1/2 volume, approx. 1/2 weight. Operating expense: 3x lower running cost, reduced degassing ...
-
ShowcaseManufactured by Quantek Instruments, Inc.based in USA
The Quantek Model 902D is a benchtop oxygen and CO2 headspace analyzer, primarily used for gas flushed food packages. Achieve accurate oxygen and carbon dioxide measurements in 20-25 seconds. This headspace analyzer contains an internal pump to draw in sample from your package and display O2 and CO2 concentration results in 30 seconds. The expected oxygen sensor life is typically 5 years, unlike ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The multigas calibrator with GPT, ozone and self re-generable zero air generator, Sonimix 3012/3022, is an instrument designed to calibrate manually or by remote control up to 6 monitors installed in an air pollution monitoring station, such as SO2, HC, BTX, CO, NOx and O3. ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
Zeeman AAS for flame, graphite furnace and hydride technique. The flexible tandem instrument with two sample compartments for flame, hydride and graphite furnace technology, upgradeable for direct solids ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
H2S analyzer adopts catalytic conversion method to convert sulfurous gas into SO2 and then employs sluorescence method to measure the concentration, which is reliable, accurate and convenient. The available range cobers from 0-500ppb to 0-20pm. The AM-5105 H2S analyzer designed and manufactured by ZETIAN, one of the best ambient air quality monitoring system manufacturers, can be used on many ...
-
PremiumManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
Gasmet portable calibrator is one of the most important tools in generating new applications for the Gasmet FTIR gas analyzer. The calibrator incorporates a syringe pump, a manual needle valve, a mass flow meter, and a stainless-steel injection chamber. The syringe pump injects precise amounts of liquid or gas into a hot nitrogen gas flow, thus producing a continuous flow of a known concentration ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
The TRSMEDOR is an automatic and isothermal gas chromatograph dedicated to sulfur compounds analysis (H2S, mercaptans and sulphides) in different matrices. Two versions exist : the TRSMEDOR ppm which measures at ppm levels and the TRSMEDOR ppb which measures at ppb ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
A highly flexible range of high-precision flue gas oxygen analysers developed specifically for combustion analysis and control applications. Using AMETEK’s industry-proven zirconium oxide sensor technology, the WDG-1200/1210 range provides the world’s first fully-integrated, standalone flue gas oxygen analysers. The user interface is mounted onto the probe, lowering installation ...
-
PremiumManufactured by Cerex Monitoring Solutions, LLC.based in USA
Real-time laboratory quality measurements within a portable package. A true multi-gas analyzer, the Shepherd FTIR standard gas detection libraries are built for common applications, including: air toxics monitoring, hospital and anesthetic gas monitoring , and refinery monitoring. The Shepherd FTIR is also capable of simultaneous monitoring of more than 350 compounds in Cerex’s FTIR ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
An all in one solution including dual combined autoGCs FID: airmoVOC C2C6 and airmoVOC C6C12. This solution is provided worldwide for ozone precursors monitoring in ambient air. The airmOzone utilizes the airmoVOC C2-C6 and an airmoVOC C6-C12 with FID to monitor ...
-
PremiumManufactured by Environics, Inc.based in USA
The Environics® Series 6113 is the ideal system for those looking for a standard for ozone monitoring and reporting programs who need the ability to measure external ozone sources. Units consists of a single chassis supporting a thermal mass flow controllers, an ozone generation module, photometer, static mixer and control electronics. Like the Series 6103, the Series 6113 may also be ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
Zeeman AAS for graphite furnace and hydride technique. Highly sensitive trace analyzer for recurring measurement tasks, upgradeable for direct solid ...
-
PremiumManufactured by CO2Meter, Inc.based in USA
The CM-7004: CO2 Multi Sensor Horn Strobe Add-On is designed to provide instant audible/visual strobe alarm that can be used in interior placements with the CO2 Multi Sensor Tablet, Sensors, and Reset Units. This CO2 Multi Sensor Horn Strobe works only with our CO2 Multi Sensor Tablet. ...
-
PremiumManufactured by Quantek Instruments, Inc.based in USA
The Q2 is a Portable Oxygen and CO2 analyzer, used for research or package testing. The Q2 is a portable headspace analyzer for measurement of O2 and CO2 levels in gas flushed MAP packages (such as coffee or meat products). Alternately, the Q2 can be used for portable O2 and CO2 measurements for research applications (such as cell culture incubators). It weighs only 2 lbs, and comes with ...
-
PremiumManufactured by Environics, Inc.based in USA
The Environics® Series 9100 Computerized Ambient Monitoring Calibration System consists of a single chassis supporting up to three (3) thermal mass flow controllers, an ozone generation module, a mixing zone, a reaction chamber for gas phase titration and control electronics. The Series 9100 is operated through a large, worksheet format screen or may be remotely operated using optional ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
microVOC is a compact VOC analyzer which allows continuous and realtime qualification and quantification of benzene, toluene, ethylbenzene, xylene and other VOC on demand. User friendly. Compact size and low weight. Deployment in less than 5 minutes. Powered by mains or battery. Low consumption of carrier gas. Rapid calibration with gaseous BTEX mixture or only Toluene. Compatibilty with ...
-
PremiumManufactured by ENVEAbased in FRANCE
Ideal for mid-high to high concentrations, also for sampling locations in hazardous areas ...
-
PremiumManufactured by Environics, Inc.based in USA
The Series 4000 consists of a single chassis now supporting up to eight mass flow controllers. The mass flow controllers are factory calibrated using a primary flow standard traceable to the United States National Institute of Standards and Technology (NIST). Each flow controller utilizes an 11 point calibration table with linear interpolation, to increase accuracy and reduce flow controller ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
The dynamic calibrator is based on the microprocessor technology and the multi-channel gas calibration equipment developed specifically for precise gas analyzer. Adopting the high precision quality flow controller and standard gas, the calibration standard gas is provided for the zero and span test of multiple gas parameters, which can provide four air sources simultaneously. The dynamic ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The Model VE 222 is an efficient, all heated and low pressure drop 2-stream sample sequencer, filter and interface for removing solids from two gaseous sample streams. The Model VE 222 utilizes two independent permanently installed all stainless steel mesh sample filters and two independent all stainless steel sample valves in a thermostatic controlled oven to prevent the loss of high molecular ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you