Calibration Gas Equipment For Air And Climate Available In Dominica
-
ShowcaseManufactured by EMC Hycal Limitedbased in UNITED KINGDOM
Probe longevity: 100 measurements typical, 20 hours continuous immersion. Response time: 5 minutes to stable result, response time less than 2 seconds. Footprint: approx. 1/2 volume, approx. 1/2 weight. Operating expense: 3x lower running cost, reduced degassing ...
-
ShowcaseManufactured by Quantek Instruments, Inc.based in USA
The Quantek Model 902D is a benchtop oxygen and CO2 headspace analyzer, primarily used for gas flushed food packages. Achieve accurate oxygen and carbon dioxide measurements in 20-25 seconds. This headspace analyzer contains an internal pump to draw in sample from your package and display O2 and CO2 concentration results in 30 seconds. The expected oxygen sensor life is typically 5 years, unlike ...
-
PremiumManufactured by Umwelttechnik MCZ GmbHbased in GERMANY
The catalytic gas purifier also removes hydrocarbons and CO from the treated zero gas. This gas free of HC and CO is suitable as process and carrier gas for gas chromatographs and to produce calibration gas for CO/HC ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The multigas calibrator with GPT, ozone and self re-generable zero air generator, Sonimix 3012/3022, is an instrument designed to calibrate manually or by remote control up to 6 monitors installed in an air pollution monitoring station, such as SO2, HC, BTX, CO, NOx and O3. ...
-
PremiumManufactured by Synspec BVbased in NETHERLANDS
Synspec supplies the NITROSTATION50RC product line of Ultra High Purity Nitrogen Generator with integrated Air compressor, to fit almost any type of application which needs independent supply of pure Nitrogen close to the consumer in an elegant 19” casing with full color display and touchpad. Compressed Air is first filtered from particulates down to 5µm and dried by a static dryer. ...
-
PremiumManufactured by Environics, Inc.based in USA
The Environics® Series 9100 Computerized Ambient Monitoring Calibration System consists of a single chassis supporting up to three (3) thermal mass flow controllers, an ozone generation module, a mixing zone, a reaction chamber for gas phase titration and control electronics. The Series 9100 is operated through a large, worksheet format screen or may be remotely operated using optional ...
-
PremiumManufactured by Umwelttechnik MCZ GmbHbased in GERMANY
Compact system for PC-controlled multipoint multi-component span gas generation for up to 25 l of span gas / hour. Up to 8 gases can be mixed into one span gas. An ozone generator can be integrated to generate ozone span gas or for gas phase titration with ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The VE 112WP is the wall or panel mount version of our time proven VE112 heated sample filter and interface. Can be mounted in a separate NEMA 4 type housing or the system with all analyzers and sample cooler. With our unique sample back purge system, typically no sample filter at the stack probe is needed. During back purge not only the internal sample filter is cleaned, but also the heated ...
-
PremiumManufactured by Quantek Instruments, Inc.based in USA
The Quantek Model ZR1000 is a trace oxygen analyzer used for the measurement of trace oxygen in all types of inert environments. The ultra-fast zirconia sensor will respond from 1000 to 10 ppm in about 23 seconds, as opposed to other instruments which may take minutes to reach 10ppm. This unit is powered by an AC to 12Vdc power supply/adapter, or an optional Ni-MH rechargeable battery pack, with ...
-
PremiumManufactured by Environics, Inc.based in USA
The Environics® Series 7000 Zero Air Generator is an ultra high purity air generator system that is capable of continuous delivery of up to 20 standard liters per minute (SLPM), 30 pounds per square inch (PSI) of dry, contaminant-free air. The ZAG is a powerful stand-alone unit, so there is no need for you to worry about an external compressed air supply or dangerous and expensive gas ...
-
PremiumManufactured by Synspec BVbased in NETHERLANDS
Monitoring of benzene, toluene, ethylbenzene, xylenes (BTEX) and other hydrocarbons in the ambient air. Synspec GC955 601 gas chromatograph (GC) is built specifically for the measurement of BTEX in ambient air. It can be utilised to simultaneously detect and measure up to 40 different components. The settings of the system can be also customised to include specific components that the client ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran Model 1304 Air Filtration System is an inexpensive, convenient conditioning unit for plant compressed air. The Series 3300 Mercury CEM requires two types of air in order to operate. Motive air is required to drive the inertial filter sample flow via an eductor. Zero Air is used for dilution and for the generation of calibration gas. Both types of air should be dry, oil free and ...
-
PremiumManufactured by Oizom Instruments Pvt. Ltd.based in INDIA
Oizom has years of experience in stimulating innovation by creating groundbreaking technology for environmental monitoring. With IoT-based development approach, Oizom has been able to successfully unlock multiple solutions, catering to various industries. Our sensing technology works on proven working principles like NDIR, Electrochemical Analysis, Semiconductor, Optical Measurement, and ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
Powerful high-end AAS devices for highly efficient and sensitive multielement analysis for research and everyday lab use. Easy to use – simple multielement analysis with no need for lamp changes. Powerful – wide dynamic range and continuous calibration. Cost-efficient – high productivity and operating costs that remain ...
-
PremiumManufactured by Cerex Monitoring Solutions, LLC.based in USA
UV 3000 Series: UV 3000, UV 3000P, UV3000C-RM. UV-DOAS based Continuous Emissions Monitoring. Cross stack, In-Situ probe and Parallel cell models available. Combustion gases, BTEX, SVOC’s, chlorine, ammonia, and more. Application specific ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The Sonimix 7050 is a simplified gas mixer based on the principle of gas stream through mass flow controllers (MFC) and mainly used to calibrate and linearize Gas Monitors. Built according to the ISO 6145/7 normalization, the Sonimix 7050 is totally compatible with the US EPA methods and can be easily linked with National Standards (NIST, METAS, UKAS…). The Sonimix 7050 Multi range gas ...
-
PremiumManufactured by CO2Meter, Inc.based in USA
This CO2 Multi Sensor Add-On is designed to provide easily addressable sensing (up to 12 per device) dependent upon your specific environment and ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
The vigi e-nose is an analyzer able to track VOCs, Sulfur compounds and other molecules as ammonia for example. It allows to provide a rich global fingerprint to correlate with human sensory evaluation as dynamic olfactometry as example. It is possible to train the vigi e-nose with human sensory samples to study correlation with ASTM 679-E04 or EN ...
-
PremiumManufactured by Environics, Inc.based in USA
The Environics Continuous Emissions Monitoring Calibration Systems (CEMCS) have been used in CEM vans and laboratories for over twenty-five years. They meet or exceed the performance requirements of the United States EPA 40 CFR Part 51 Method 205 Appendix M. The accuracy and repeatability make them the unit of choice for source testers around the world. ...
-
PremiumManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
Analyzer for Oxygen Measurements: Gasmet oxygen analyzer is designed for continuous oxygen measurement of wet or dry flue gas. This extractive analyzer is suitable for various industrial applications where reliable and accurate oxygen measurement is ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you