Calibration Gas Equipment For Air And Climate
-
ShowcaseManufactured by EMC Hycal Limitedbased in UNITED KINGDOM
Probe longevity: 100 measurements typical, 20 hours continuous immersion. Response time: 5 minutes to stable result, response time less than 2 seconds. Footprint: approx. 1/2 volume, approx. 1/2 weight. Operating expense: 3x lower running cost, reduced degassing ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The Sonimix 7100 is a gas mixer mainly used to calibrate and linearize gas monitors and to generate specific gas mixtures. The Sonimix 7100 is based on the principle of gas flow through MFC (Mass Flow Controllers) and is built according the ISO 6145/7 standards. This instrument provides a very high flexibility allowing to combine multigas mixtures (up to 5 gases + a balance gas) and multi-range ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
Powerful: wide dynamic range and continuous calibration. Cost-effective: high sample throughput and fast analysis times. Versatile: also for direct solid ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The Sonimix 2106 is a gas mixer mainly used to calibrate and linearize gas monitors and to generate specific gas mixtures. The Sonimix 2106 is based on the principle of gas flow through sonic nozzles and is built according the ISO 6145/6 standard. The sonic nozzle principle makes it the most accurate and stable device on the market. It generates binary mixtures from 0 to 100% in fixed steps in a ...
-
ShowcaseManufactured by Quantek Instruments, Inc.based in USA
The Quantek Model 902D is a benchtop oxygen and CO2 headspace analyzer, primarily used for gas flushed food packages. Achieve accurate oxygen and carbon dioxide measurements in 20-25 seconds. This headspace analyzer contains an internal pump to draw in sample from your package and display O2 and CO2 concentration results in 30 seconds. The expected oxygen sensor life is typically 5 years, unlike ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
Infrared Gas Detector - 1 or 2 Points of Detection from a Single Head. The iTrans2 infrared gas detector employs an intelligent electronics platform to provide one or two points of detection from a single head for maximum flexibility, superior performance and lower installation costs. With the optional HART Communication Protocol, the iTrans2 offers remote diagnostics, set-up or calibration by ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
microVOC is a compact VOC analyzer which allows continuous and realtime qualification and quantification of benzene, toluene, ethylbenzene, xylene and other VOC on demand. User friendly. Compact size and low weight. Deployment in less than 5 minutes. Powered by mains or battery. Low consumption of carrier gas. Rapid calibration with gaseous BTEX mixture or only Toluene. Compatibilty with ...
-
PremiumManufactured by Zeltex LLCbased in USA
X-NIR hand held analyzer for forages and grains that measures the percentage of Moisture (Dry Matter), Starch, Crude Protein, ADF, NDF, Ash and Crude Fat of different feeding materials in seconds. Patented (EP 2 377 392 / US 8 651 ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
The dynamic calibrator is based on the microprocessor technology and the multi-channel gas calibration equipment developed specifically for precise gas analyzer. Adopting the high precision quality flow controller and standard gas, the calibration standard gas is provided for the zero and span test of multiple gas parameters, which can provide four air sources simultaneously. The dynamic ...
-
PremiumManufactured by Infitek Co., Ltd.based in CHINA
Coagulation analyzer is a routine testing medical device that measures the content of various components in human blood, quantifies the results of biochemical analysis, and provides reliable digital basis for clinical diagnosis of various diseases of ...
-
PremiumManufactured by Environics, Inc.based in USA
The Environics® Series 6103 automatically performs zero, precision, span and multi-point calibrations using NO, NO2, SO2, CO, O3, hydrocarbons and other gases of interest. The system consists of a single chassis supporting up to three (3) thermal mass flow controllers, an ozone generation module, photometer, glass output manifold, mixing chamber, a reaction chamber for gas phase titration and ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
U.S. EPA allows critical orifices to be used as calibration standards. This mether calibration set is used for calibrating dry gas meters in order to perform post-test calibration audits. The orifice calibration set contains five of our critical orifices with 1/2″ quick connects and software. Re-calibration recommended annually. Calibration Orifice Set, 6 Calibrated Critical Orifices. and ...
-
PremiumManufactured by Synspec BVbased in NETHERLANDS
Monitoring of benzene, toluene, ethylbenzene, xylenes (BTEX) and other hydrocarbons in the ambient air. Synspec GC955 601 gas chromatograph (GC) is built specifically for the measurement of BTEX in ambient air. It can be utilised to simultaneously detect and measure up to 40 different components. The settings of the system can be also customised to include specific components that the client ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
Chromatotec® Group distributes Process Quadrupole Mass Spectrometers from InProcess Instruments in France, Italy, Benelux, Saudi Arabia and Taiwan. Learn more about this partnership following this link. With this product line, we can now offer flexible and customer-specific solutions ideal for very fast, precise and continuous multi-component gas analysis. These complete systems include ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
An advanced carbon monoxide detector designed to provide early warning of spontaneous combustion in pulverisers for coal and biomass. Specifically designed for early detection of potential fire risk in pulverizing mills in coal or biomass processes, Millwatch monitors and quickly responds to sudden carbon monoxide (CO) build-up, allowing preventative action to be taken before a hazardous ...
-
PremiumManufactured by Cerex Monitoring Solutions, LLC.based in USA
Recommended for ambient air monitoring applications, waste anesthetic monitoring, anesthetic leak detection, and hospital workplace exposure ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran Series 3300Xi Mercury CEM is in place at over 130 sources in the U.S. For every installation, we have met and exceeded all performance requirements for our customer’s state and federal regulations. Tekran® is the most experienced mercury monitoring resource in the world and continues to lead in mercury compliance monitoring, abatement system control and mobile testing ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The Sonimix 7050 is a simplified gas mixer based on the principle of gas stream through mass flow controllers (MFC) and mainly used to calibrate and linearize Gas Monitors. Built according to the ISO 6145/7 normalization, the Sonimix 7050 is totally compatible with the US EPA methods and can be easily linked with National Standards (NIST, METAS, UKAS…). The Sonimix 7050 Multi range gas ...
-
PremiumManufactured by CO2Meter, Inc.based in USA
The Remote Carbon Dioxide (CO2) Storage Safety Alarm is designed to protect customers and workers near stored carbon dioxide (CO2). The safety monitor measures carbon dioxide levels and detects leaks protecting facilities from over exposure to hazardous ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
airmo HCHO is designed for the measurement of formaldehyde in air or pure gases. The airmo HCHO is an autoGC using FID detector dedicated to Formaldehyde monitoring at low concentration. This instrument uses a valve with a single sorbent trap, a metallic column and a ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you