Carbon Adsorption Equipment For Air And Climate Near New Brunswick
-
Manufactured by United Rentals Europe, formerly known as BakerCorpbased in NETHERLANDS
Activated Carbon: Granular, pelletized and powdered media to remove organic contaminants from vapor and liquid ...
-
Manufactured by Industrial Maid LLCbased in USA
2000 CFM , 14 Ga. Frame, 3/16″ Black Matte Polyethylene Panels, 3/4 HP 115-1-60 2 Speed Motor, Direct Drive Blower, On/Off Switch, 12′ ...
-
Manufactured by CSM Worldwide, Inc.based in USA
Depending on the specific requirements of an air pollution control application, CSM may recommend additional front-end or back-end attachments to ensure that your solution is complete as well as ...
-
Manufactured by Branch Environmental Corporationsbased in USA
Direct Thermal Oxidation involves simply applying heat to the contaminated air until the temperature is raised enough for combustion to occur. Organic compounds have a temperature at which they will begin to oxidize even if no direct flame were present. For example, if a organic compound has an auto ignition temperature of 932°F / 500°C, it would begin to convert to carbon dioxide and ...
-
Manufactured by PEAK Scientific Instruments Ltdbased in UNITED KINGDOM
The Precision Nitrogen 600 has been developed to provide a constant and consistent source of nitrogen for detector make-up gas at standard/typical detection levels for GC applications, as well as headspace vial pressurization, purge and trap, tube conditioning for thermal desorption and sample preparation. These generators are capable of delivering high purity nitrogen, removing oxygen and ...
-
Manufactured by PEAK Scientific Instruments Ltdbased in UNITED KINGDOM
The NG5000 delivers ultra high purity nitrogen at trace detection limits through Pressure Swing Adsorption technology at flows of up to 5 L/min for GC, DSC and DMA applications as well as other laboratory applications requiring up to 5L/min of ultra high purity nitrogen. This generator requires a high quality source of in-house air to supply the unit. For labs without this air supply the ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The HFID Model 603 is a competitively priced, digitally controlled self extracting, heated total hydrocarbon analyzer for high accuracy, sensitivity and long term stability. It can be used in a 19' rack or as a table top ...
-
Manufactured by PEAK Scientific Instruments Ltdbased in UNITED KINGDOM
Precision Nitrogen 1000 has been developed to provide a constant and consistent source of nitrogen for detector make-up gas for GC applications, as well as headspace vial pressurization, purge and trap, tube conditioning for thermal desorption and sample preparation. These generators are capable of delivering high purity nitrogen, removing oxygen and moisture via Pressure Swing Adsorption and ...
-
Manufactured by PEAK Scientific Instruments Ltdbased in UNITED KINGDOM
The Precision Nitrogen 600 has been developed to provide a constant and consistent source of nitrogen for detector make-up gas at standard/typical detection levels for GC applications, as well as headspace vial pressurization, purge and trap, tube conditioning for thermal desorption and sample preparation. These generators are capable of delivering high purity nitrogen, removing oxygen and ...
-
Manufactured by PEAK Scientific Instruments Ltdbased in UNITED KINGDOM
The NG5000(A) delivers ultra high purity nitrogen at trace detection limits through Pressure Swing Adsorption technology at flows of up to 5 L/min for GC, DSC, DMA and other applications requiring ultra high purity nitrogen at up to 5L/min. The NG5000(A) comes with an internal compressor for laboratories without an external source of gas. To reach their ultra high purity nitrogen output these ...
-
Manufactured by VIG Industriesbased in USA
This system was designed to control a carbon adsorption ...
-
Manufactured by PEAK Scientific Instruments Ltdbased in UNITED KINGDOM
The NG3000A delivers ultra high purity nitrogen at trace detection limits through Pressure Swing Adsorption technology at flows of 3 L/min for GC, DSC, DMA and other applications requiring ultra high purity nitrogen at up to 3L/min. The NG3000A comes with an internal compressor for laboratories without an external source of gas. To reach their ultra high purity nitrogen output these generators ...
-
Manufactured by PEAK Scientific Instruments Ltdbased in UNITED KINGDOM
For applications requiring heating and cooling nitrogen, the Genius 1052 PSA nitrogen generator contains highly effective Pressure Swing Adsorption and Carbon Molecular Sieve technologies to deliver a clean nitrogen gas supply. Developed for GCxGC modulators, this model can be used for a wide variety of applications requiring similar nitrogen outputs ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The J.U.M. Engineering HFID Model 5-100 is a compact 19" rack mount or table top heated total hydrocarbon analyzer for high accuracy, sensitivity and stability for pressurized samples with conventional sample back pressure ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The HFID Model VE572 is a reliable and rugged Dual Channel Sequencing heated total hydrocarbon analyzer for low drift, high accuracy, sensitivity and stability. It uses our time proven hydrogen flame ionization detector (FID) in a heated oven to prevent the loss of high molecular weight hydrocarbons and to provide reliable performance in the analysis of high concentrations down to trace levels of ...
-
Manufactured by CR Clean Air Group, LLCbased in USA
H2S: Hydrogen Sulfide is most often found in the off-gases from Waste Water Treatment plants and certain Pulp and Paper processes (here along with other TRS-total reduced sulfur- compounds), Hydrogen Sulfide reacts readily with aqueous NaOH but often aqueous NaOH alone is not the preferred choice for ...
-
Manufactured by Carbtrol Corporationbased in USA
FEATURES: Low pressure drop. Epoxy lined mild steel construction. High activity carbon. Fork lift fittings for easy handling. Slotted inlet distributor. Acceptable for transport of hazardous spent ...
-
Manufactured by Carbtrol Corporationbased in USA
The CARBTROL "G" Canisters handles flows up to 500 ...
-
Manufactured by Carbtrol Corporationbased in USA
FEATURES: Low pressure drop. Epoxy lined, mild steel construction. Fork lift fittings for easy handling. Acceptable for transport of hazardous spent carbon. High activity ...
-
Manufactured by Carbtrol Corporationbased in USA
CARBTROL offers a complete line of proven, high quality equipment equipment wash water recycling and treatment systems for commercial, industrial, and military use. Our equipment wash water recycle systems are ideal for public works garages and highway equipment wash operations. Equipment wash water is reclaimed, treated and recycled, which conserves water and reduces or eliminates contaminant ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you