Carbon Dioxide (CO2) Monitoring Equipment For Air And Climate
-
Manufactured by Orthodyne S.A.based in BELGIUM
The TCD Gas Chromatograph is not as sensitive as other detectors but it is non-specific and non-destructive. A TCD detector consists of an electrically-heated wire or thermistor (tungstenrhenium wire). The temperature of the sensing element depends on the thermal conductivity of the gas flowing around it. as Oxygen, Air, Carbon Dioxide, Nitrogen, Argon, Helium and ...
-
Manufactured by QED Environmental Systems, Incbased in USA
The G110 has been developed to incorporate the latest technology and specification requirements, that provide the user with a fast and simple to use ...
-
Manufactured by LogiCO2 International ABbased in SWEDEN
A Fail-Safe shut-off valve made for bulk CO2 containers. When you reach the Short-Term Exposure Limit – The valve shuts off the CO2 flow, thus minimizing the risk of over exposure as well as saving the cost of losing ...
-
Manufactured by Respirometry Plus, LLCbased in USA
The Fully Automated Arthur Phase V Respirometer with updated electronics, single or double units, and with the same unique features that have always set it apart from all other wastewater ...
-
Manufactured by Rel-Tek Corporationbased in USA
This self contained unit houses an optical infrared source and solid state absorption analyzer, the electronics generate 4-20mA and 0-1VDC analog outputs plus a 110VAC power supply, two SPDT individually settable trip relays, a meter and a pump… all packaged in a 10x8x4 painted steel enclosure or a 10x7x7” (254x178x178mm) dust/water proof fiberglass enclosure. Weight is about 6 ...
-
Manufactured by AGC Instruments Ltd.based in IRELAND
To measure % Carbon Dioxide (CO ) in Welding Gas Applications. Lightweight and portable handheld analyser that gives a fast and accurate Carbon Dioxide (CO ) sample measurement in your welding gas mix (e.g. CO ). The levels of Carbon Dioxide gas are measured using a specially customised nondispersive infrared sensor (NDIR) and are displayed in seconds on a large LCD display with a backlight. The ...
-
Distributed by Diamond Scientific - Authorized Distributorbased in USA
New CO2 analyzer specifically designed to monitor CO2 for the verification of incubators in research and pharmaceutical markets. This unit has been developed to incorporate the latest technology and specifications requirements, that provide the user with a fast, simple to use and accurate piece of laboratory ...
-
Manufactured by General Biomass Companybased in USA
General Biomass Company develops advanced enzymes to make bioplastics and renewable chemicals from nonfood biomass and municipal solid waste. Our engineered cellulase and hemicellulase enzymes make biosugars - glucose and xylose - from cheap nonfood biomass. Glucose and xylose are universal substrates for all industrial fermentations, allowing production of a wide variety of renewable chemicals ...
-
Manufactured by ETG Risorse e Tecnologia S.r.l.based in ITALY
For NH3 - HCl - XH4 - CO2 - H2O monitoring This avant-grade monitoring system has the ability to detect even quicker molecules at the most accurate range. ETG 6900 TDL continous status monitoring, automatic calibration and remote controlling option (by ethernet & USB) allows the user to exploit the maximum capacity of the instrument at the minimum effort and mantenance. ETG 6900 TDL is ...
-
Manufactured by LED Microsensor NTbased in RUSSIA
CDK is an evaluation kit for CO2 detection, which includes all the needed components for quick and simple start. The possibility to change the parts within the kit easily makes the kit a flexible and utility ...
-
Manufactured by BioSpherix, Ltd.based in USA
The OxyCycler C42 is a unique dual channel/dual gas controller for incubators and C-Chambers. Oxygen and carbon dioxide control is managed via independently programmable channels for optimum control. No other instrument has such a fine simulation of dynamic exposure. Applications of the OxyCycler C42 incubator controller include intermittent hypoxia, graded hypoxia, and timed ...
-
based in SOUTH KOREA
Our CO2 gas sensors get a small deviation unlike NDIR Single type. So they keep long term ...
-
Manufactured by SST Sensing - a brand by Process Sensing Technologies (PST)based in UNITED KINGDOM
The CozIR®-A Ambient Air CO2 Sensor is designed to monitor CO2 in “breathable” air up to 10,000ppm, ideally suited for Indoor Air Quality (IAQ) applications in the Food & Beverage, Aerospace and Safety markets. The CozIR®-A Ambient Air CO2 sensor comes either cased or uncased – depending on the customers requirements. It has a variety of configurable options ...
-
Manufactured by Pyro Green-Gas (formerly known as AirScience Technologies Inc.)based in CANADA
This process is used at high pressure for the drying of gas from the discharge of carbon dioxide removal system, to very low dew point prior to the liquefaction of natural gas. The duty of the PSA in this application is to remove all humidity from a gas saturated with humidity as it exits the amine scrubbing system (CO2 removal ...
-
Distributed by Diamond Scientific - Authorized Distributorbased in USA
New CO2 analyzer designed to monitor CO2 for all indoor air quality applications. This unit has been developed to incorporate the latest technology and specification requirements, that provide the user with a fast, simple to use and accurate piece of environmental field ...
-
Manufactured by Nova Biomatique (2011) Inc.based in CANADA
The iGS-221 integrated controller is the simplest and most complete solution for integrated climate management and CO2 enrichment or venting. Simultaneously controls the temperature, humidity and CO2 concentration. The iGS-221 prioritizes actions according to a logical sequence, avoiding contradictory actions. Intelligently manages simultaneously 6 actions: CO2 enrichment, venting, humidifying, ...
-
by HypOxygenbased in USA
HypOxystation is the only hypoxic chamber purpose built for physiological cell culture research. Specifically designed to create normoxic, hypoxic and anoxic conditions within a controlled and sustained workstation environment; this hypoxic incubator is ideal for research requiring the ability to accurately control oxygen, carbon dioxide, temperature and humidity. With such accurate control and ...
-
Manufactured by RKI Instruments, Inc.based in USA
The RI-215 series of IR CO2 montitors are widely used in the measurement and control of CO2 levels in a variety of applications where CO2 monitoring or detection is required. A highly accurate, RKI non-dispersive infrared absorption sensor is used to provide direct measurements through diffusion or sample draw monitors, and activate alarms or control ventilation systems based on preset CO2 ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
Using tunable diode laser absorption spectroscopy, the 5100P is a transportable, easy-to-use analyzer optimized to measure either water vapor (H2O) or carbon dioxide (CO2) in select gas streams. It offers the fast-response, high-accuracy benefits of TDLAS technology in a lightweight, durable and mobile platform that is certified for use in hazardous areas including Class I, Division 2, and both ...
-
Manufactured by Sertronicbased in FRANCE
Gaz treated Hydrogen. Impurities Removed O2, CO, CO2, H2O. Outlet impurities level 1 ppb. Principle Catalysis + adsorption, The feed gas passes through a special catalyst to convert O2 into H2O. CO, CO2 and H2O are removed by an adsorbant layer. Use Semi-conductor industry,welding gases, metallurgical industry, glass ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you