Cartridge Air Filtration Equipment For Air And Climate Available In Australasia
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
HI-Q’s CF-993B & CF-993B-4 are ideal for remote location air sampling where line power is not available. An internally mounted sealed 12 Volt battery and battery charger eliminate the need for the transportation of cumbersome battery cables and the awkward handling of heavy batteries. The timer has 10 programmable timing functions with a wide time range. The flow rate of the CF-993B ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
The CF-24B, FIXED SPEED, 12/24 VDC external battery operated field unit is ideal for remote site grab sampling. An elapsed, resettable timer (with independent 5 year battery) is incorporated into the unit housing to track exact sampling duration. The throughput flow rate is dependent upon the pressure drop across the filter media and the supplied voltage (12 or 24 volts DC). The CF-24B includes a ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
This low cost pump is ideal for indoor or outdoor sampling of Air Pollutants such as Radioactive Particulate. The standard TFIA unit comes complete with a rotometer scaled up to 70 CFM and a 4” diameter filter holder assembly which accepts the “CF” series 8” x 10” paper only ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
Due to the variable speed flow rate control, brushless maintenance free blower and portability, the CF-1512-VBRL is considered to be “The Ideal External Battery Operated Air Sampler”. The brushless blower used in the CF-1512-VBRL draws a maximum of 3.0 Amps at 6.5 CFM, permit-ting longer sampling times on a single battery charge. For higher maximum flow rates, with minimal Amp draw, ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
HI-Q has incorporated a high efficiency, variable speed circuit in its CF-995B, battery operated air sampler series which allows its users to preset flow rates by varying the blower motor speed. The CF-995B & CF-995B-4 are ideal for adjustable flow, remote location air sampling where AC line power is not available. An internally mounted battery and battery charger eliminate the need for the ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
The CF970T-Series Air Samplers provide sampling time ranges from 0.01 seconds to 9999 Hours. Time ranges and operating modes are selected by front panel programming. There are eleven programmable time ranges and six programmable operating modes (i.e.: delay, interval, single shot…). The programmable versatility makes the CF-970T ideal for grab and intermittent assay of particulate and ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
This Low-Cost/High-Performing Air Sampling System is ideal for radioiodine and particulate grab & continuous duty air sampling. The CF-900 Series air samplers are packaged in rugged aluminum enclosures weighing less than 10 pounds. Its' light weight yet durable frame allows a single operator to transport, set up, and take a sample quickly in almost any conditions. Order the unit which best ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
This Portable, Maintenance-Free, Variable Speed, High Volume Air Sampling System is ideal for continuous or intermittent sampling. The “CF-1000BRL” air sampler series have three flow ranges from which to choose. The standard CF-1001BRL unit includes a 1½” female straight-pipe fitting, which accepts all “CF” Series holders (excluding the CFPH-810), and is ...
-
Manufactured by Baoji Yinggao Metal Materials Co., Ltd.based in CHINA
High Porosity and Air Permeability High Dirt Holding Capacity Pressure Resistance and Low-Pressure Drop High-Temperature ...
-
Manufactured by Clean Air America Inc.based in USA
The Clean Air P1200HD Fume Collector features an ergonomic heavy-duty design utilizing strong casters on a portable, easy-to-move collector. The single-phase 110-120V plug-and-play setup is lightweight but ready to be your go-to mobile source capture for heavy duty maintenance ...
-
Manufactured by Wacker Neuson SEbased in GERMANY
The flexible WL 18 wheelloader from Wacker Neuson is extremely compact, maneuverable and can be easily transported from construction site to construction site. Whether outside in the open or indoor: It works hard even in small spces - reliably and with staying power. Its 3-cylinder Perkins engine is as powerful as it is economical to operate. Due to its robust design, the WL 18 is durable and ...
-
Manufactured by Flexicon Corporationbased in USA
This Sanitary Bag Dump Weigh Batch Station with integral mechanical conveyor collects dust created during manual dumping of bulk materials from bags, boxes, drums and other containers, and discharges bulk material by ...
-
Manufactured by Flexicon Corporationbased in USA
This Manual Dump to Rigid Bin Weigh Batching System eliminates dust during manual dumping from bags, boxes, drums and other containers, de-lumps the material, and feeds it gravimetrically from mezzanine level into rigid bins placed on a floor scale. The Manual Dumping Station features a high-velocity vacuum fan that draws airborne dust from the operator's atmosphere onto two cartridge filters. ...
-
Manufactured by Thrace Plastics Pack S.A.based in GREECE
Thrace Group Nonwovens for air filtration are spunlaid, continuous filament, thermally bonded fabrics made out of 100% polypropylene. They are non-toxic materials with a wide variety of characteristics that can be sewn or welded for filter bags ...
-
Manufactured by Disab Vacuum Technologybased in SWEDEN
This vacloader is equipped with a separate diesel engine which makes it possible for the vacloader to operate independently of the truck. It has suction and blow features and provides great flexibility for different applications with multiple add-ons available. Its round tank design makes it suitable for wet and dry applications and it’s often used in following industries: cement, steel, ...
-
Manufactured by Disab Vacuum Technologybased in SWEDEN
This vacloader is equipped with a separate diesel engine which makes it possible for the vacloader to operate independently of the truck. It has a suction only feature and provides great flexibility for different applications with multiple add-ons available. Its square tank design makes it suitable for dry applications and it’s often used in following industries: cement, steel, building, ...
-
Manufactured by Disab Vacuum Technologybased in SWEDEN
This is a semi-mobile vacloader mounted onto a roll-on/roll-off frame. It is equipped with a separate diesel engine which makes it possible for the vacloader to operate independently of a truck. It has a suction only feature and provides great flexibility for different applications with multiple add-ons available. Its square tank design makes it suitable for dry applications and it’s often ...
-
Manufactured by Airprocontrol Industrial Air Conditioning Trade Inc.based in TURKEY
High efficiency cartridge filters used in the air intake systems of gas turbine engines in power plants. Airborne dust, dirt, and other particles can enter the gas turbine, causing contamination, wear, or damage to turbine blades and other internal components. GASTEX GT cartridge filters play a critical role in preventing damage. These filters help optimize turbine performance, reduce maintenance ...
-
Manufactured by Changzhou Zonel Environmental Technology Co., Ltd.based in CHINA
Cement silo top dust collector also called silo dust collector, cement silo dust collector, silo top silo venting filters, etc, which is for dust collection during the silo filling works. The cement silo top dust collector was combined with filter tank, filter bag/filter cartridges, air bag, solenoid pulse jet valves, the hopper and fan are optional according to the operation ...
-
Manufactured by A.B.P Chemical Engineering and Ventilation Ltd.based in ISRAEL
The TM model industrial vacuum cleaners are designed for keeping the work environment clean. They are intended for industrial sectors where high-performance suction systems are required. They are suitable for vacuuming chippings, dust and other types of waste created by manufacturing ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you