Catalysts Applications

31 Results found
Only show results available in Virginia?
OK
  • Category: Air & Climate ×

  • Subcategory: Catalysts ×

Power Generation

by EmeraChem     based in Knoxville, TENNESSEE (USA)

Combustion turbines A gas turbine, also called a combustion turbine, is a type of internal combustion engine. It has an upstream rotating compressor coupled to a downstream turbine, and a combustion chamber in-between. The basic operation of the gas turbine is similar to that of the steam power plant except that air is used instead of water. The turbine shaft energy is used to drive the compressor and other devices such as an electric generator that may be coupled to the shaft. The energy that is not used for shaft work comes out in the exhaust gases, so these have either a high temperature or a high velocity. A catalyst is often used to treat these exhaust gases to comply with emissions regulations. EmeraChem has installed OEM and after-market catalyst in over 240 applications

Wastewater treatment solutions for fat, oil & grease

by QM Environmental Services Ltd.     based in The Hague, NETHERLANDS

Proper waste treatment and free-flowing plumbing lines are critically tied to one another. Of the many products marketed which claim to aid plumbing problems, MICROCAT® products are unique. They offer a combination of micro organisms, enzymes (biochemical catalysts) and other ingredients which act together naturally to soften, loosen, remove and break down greases, fats and oils in plumbing lines, sewer systems, pump stations and treatment plants, thus keeping them clean and odour free. Developed through the years, MICROCAT® products, whether dry or liquid are capable of safely and effectively loosening and digesting the troublesome substances, which clog drainage systems and cause odours. When used on a regular basis, MICROCAT® products can result in savings on operational and maintenance costs.

Air Pollution Control Solution for the Hydrogen Sulfide (H2S)

by Macrotek Inc.     based in Markham, ONTARIO (CANADA)

Hydrogen Sulfide is lethal if released. Macrotek is a leader in developing advanced technologies for optimum removal and treatment. Our experience includes many installations using caustic, oxidizing reagents, catalytic and forced oxidation combination, and biofilters. Each application is unique and requires custom solutions.

Agitation and mixing solutions for ethanol / bio diesel

by National Oilwell Varco     based in Dayton, OHIO (USA)

Ethanol can be produced from a variety of raw materials such as corn, sugar cane, soy beans, switchgrass, corn stover, and cellulosic materials.   Corn can be processed in a dry or wet mill to produce ethanol.  Advances and research in ethanol continues to find new and more energy efficient ways to produce ethanol and biofuels and new raw materials for production.

Waste recovery for metal refining

by Tetronics (International) Limited     based in Swindon, UNITED KINGDOM

Metal refining is increasingly seen as an essential part of natural resource conservation As sources of primary metals become scarcer or harder to excavate, the only viable solution is to extract and recycle secondary source of material already in circulation in a number of mass produced consumer products across the globe. The challenge is finding a technology that can efficiently recover these valuable metals from their less valuable materials. Tetronics can assist with a range of metal refining challenges, including:

Recycling equipments for non-ferrous scrap metal shredding & recycling

by Granutech-Saturn Systems     based in Grand Prairie, TEXAS (USA)

Non-Ferrous Metal Recycling is a large industry focusing on the recovery of metals such as aluminum, brass, copper, and even precious metals from electronic scrap. The applications and needs of non ferrous metal recyclers vary greatly. These can include a large corporate recycler buying UBC bales for shredding to be converted back into beverage cans or a small recycler who is recovering precious metals from circuit boards or catalytic converters.

Applications and Air Pollutants Removed in the Petroleum/Petrochemical Industry

by Bionomic Industries Inc.     based in Mahwah, NEW JERSEY (USA)

Scrubbing of Hydrogen sulfide, mercaptans and other organosulfur compounds from sour gas and other sources. Proprietary regenerative scrubbing chemistries for hydrogen sulfide removal with sulfur production. By-product production systems for producing sodium hydrosulfide (Nash) from hydrogen sulfide. Sulfur dioxide scrubbing. Recover catalyst dust from FCC units. HCL storage tank vent scrubbing. Removal of HCL and particulate from thermal oxidizers burning chlorinated plastics. Marine drilling platforms sulfur dioxide thermal oxidizer emissions.  Asphalt plant scrubbers and hydrogen sulfide emissions from holding tanks. Pilot plant scrubber systems for hydrogen sulfide. Removal of halogenated and sulfur bearing gaseous compounds from high temperature thermal oxidizers and drilling platforms waste. Well drilling hydrochloric acid storage tanks.

VOC emission treatment for chemical industry

by Tecam Group     based in Llinars del Vallès, SPAIN

As for VOC emission treatment, each Industry has its own technical requirements. As a technology supplier, we at Tecam Group are familiar with the production processes and requirements of Chemical manufacturers, and have a deep understanding of the technology they require for exhaust air emission treatment, and specifically, for Volatile Organic Compounds VOC emission treatment.

VOC emission treatment for pharmaceutical industry

by Tecam Group     based in Llinars del Vallès, SPAIN

As for VOC emission treatment, each Industry has its own technical requirements. As a technology supplier, we at Tecam Group are familiar with the production processes and requirements of Pharmaceutical manufacturers, and have a deep understanding of the technology they require for exhaust air emission treatment, and specifically, for Volatile Organic Compounds VOC emission treatment.

Sustainable solutions for chemicals & petroleum industry

by thinkstep     based in Leinfelden-Echterdingen, GERMANY

The chemicals industry networks are complex. Including base, consumer, specialty and fine chemicals businesses, it is also part of the automotive, electronics and other industries’ supply chains.

Air pollution control for the chemical processing industry

by Anguil Environmental Systems, Inc.     based in Milwaukee, WISCONSIN (USA)

Anguil thermal and catalytic oxidizer systems are used on various applications throughout the chemical processing industry for emission abatement. Our experience includes applications on tank vents, amine tail gases, API separators, acid gases, inert streams and more. Regulatory Compliance Guaranteed, Seamless Process Integration, Efficient Destruction Technologies, Advanced System Controls.

VOC emission treatment for flexographic industry

by Tecam Group     based in Llinars del Vallès, SPAIN

As for VOC emission treatment, each Industry has its own technical requirements. As a technology supplier, we at Tecam Group are familiar with the production processes and requirements of Flexographic manufacturers, and have a deep understanding of the technology they require for exhaust air emission treatment, and specifically, for Volatile Organic Compounds VOC emission treatment.

Industrial water Nickel Laterite

by PuriTech Ltd     based in Herentals, BELGIUM

Lateritic nickel ore deposits are surficial, weathered rinds formed on ultramafic rocks. Nickel laterites are a very important type of nickel ore deposit, they comprise 73% of the continental world nickel resources. They are growing to become the most important source of nickel metal for world demand. Nickel is a hard, silver white metal that has industrial applications related to its strength, corrosion resistance, high ductility, good thermal and electrical conductivity and catalytic properties. Its primary use is in manufacture of stainless steel, steel alloys and superalloys. The Nickel purification process is very complex of which a few are based on ion exchange, each taking care of a part of the full process cycle.

Waste recovery for petrochemical wastes

by Tetronics (International) Limited     based in Swindon, UNITED KINGDOM

Traditionally, the Petrochemical Sector has operated with basic technological solutions, with ultimate reliance on High Temperature Incineration (HTI) and landfill in order to deal with their hazardous wastes. However, tightening regulation, increasing landfill costs and social responsibilities are driving companies to look at alternative methods of treatment of very challenging wastes, including the treatment of:

VOC emission treatment for automotive auxiliary industry

by Tecam Group     based in Llinars del Vallès, SPAIN

As for VOC emission treatment, each Industry has its own technical requirements. As a technology supplier, we at Tecam Group are familiar with the production processes and requirements of Automotive manufacturers, and have a deep understanding of the technology they require for exhaust air emission treatment, and specifically, for Volatile Organic Compounds VOC emission treatment.

VOC emission treatment for petrochemical industry

by Tecam Group     based in Llinars del Vallès, SPAIN

As for VOC emission treatment, each Industry has its own technical requirements. As a technology supplier, we at Tecam Group are familiar with the production processes and requirements of Petrochemical manufacturers, and have a deep understanding of the technology they require for exhaust air emission treatment, and specifically, for Volatile Organic Compounds VOC emission treatment.

Industrial air pollution control for the recycling and waste management

by Chemisch Thermische Prozesstechnik GmbH / CTP Air Pollution Control     based in Graz, AUSTRIA

Due to the continuous rise in the waste volumes worldwide it is essential constantly to seek alternatives to landfills and waste incineration: one suitable approach is bio-mechanical waste treatment. Apart from waste management, applications for air purification systems in this field range from soil remediation to sewage sludge drying in waste water treatment, as well as to the recycling of resources and their possible re-introduction.

Need help finding the right suppliers?

Let the XPRTs do the work for you