particulate oxidation catalyst Articles

  • Recuperative oxidizer - Boat engine manufacturer

    Epcon has extensive experience in designing and building Thermal Oxidizers for Engine Cell Testing. The Problem A major Boat Engine manufacturer needed to lower emissions from engine cell testing. All motors, whether automobile or boat, are Pre-Tested for several hours prior to shipping. The emissions from these Engine Cells are mostly Carbon Monoxide and unburned fuel, with ...


    By Epcon Industrial Systems, LP

  • Selected Literature from Johnson Matthey`s Environmental Catalysts and Technologies Division

    SSEC Literature: High Temperature SCR Zeolite Catalyst for NOx Control / SCR Catalyst for NOx Control Stationary Lean Burn Engines / SCR Systems for NOx Control Stationary Lean Burn Engines / Gas Turbine Oxidation Catalyst for the control of CO and VOCs / Oxidation Catalysts for the Control of CO, VOC, HC / BanditoTM - Modular Catalytic Converter for the Control of NOx, CO and THC / Band-ItTM - ...

  • CPI Installs Catalytic Oxidizer at Pharmaceutical Mfg Company

    Catalytic Products International (CPI) recently completed the installation of a new VECTOR Series Catalytic Oxidizer (CatOx) at a Western USA manufacturer of pharmaceutical products for the abatement of Volatile Organic Compounds (VOCs).  ...

  • Case study - Engine cell exhaust: Catalytic oxidizer

    Overview Endurance testing of outboard motors for boats has typically been done in lakes and sometimes on barges. This testing was time consuming, presented logistic problems and removed the testing from the R & D department and the factory. When a company in Oklahoma decided to build their own endurance test cell area, the Environmental Protection Agency required them to control the ...

  • Case study: Regenerative thermal oxidizers for coffee roasting

    Epcon has extensive experience in designing and building Regenerative Thermal Oxidizers (RTO's) for the Coffee Roasting Industry. The Problem A leader in the Coffee Industry needed equipment to control odor and eliminate VOC's from Coffee Roasting. The company went out seeking the technical solutions and went to several manufacturers to locate the best possible technology. ...


    By Epcon Industrial Systems, LP

  • CPI Installs Catalytic Oxidizer at East Coast Bakery

    Catalytic Products International (CPI) installed a VECTOR Series Catalytic Oxidizer at an East Coast Bakery for the abatement of Volatile Organic Compounds (VOCs).  CPI worked closely with the end user customer along with their Engineering, Procurement, and Construction (EPC) firm to define, select, and engineer the equipment best ...

  • Case study - How to properly maintain and service your oxidizer

    Your air pollution control system represents a significant investment in not only initial capital but also ongoing maintenance and operation. Routine inspections performed by your staff combined with thorough maintenance plans provided by Anguil Environmental Service Technicians will ensure you get the most from your investment over the entire life of the system. Anguil has almost three decades ...

  • Innovative Solar-Panel Manufacturer Selects Recuperative Catalytic Oxidizer for New Product Line

    Operating Issue A solar-panel manufacturer in California was ready to commercially produce a groundbreaking product that had taken many years to develop. Pollution Systems (PSSI) was initially contacted as a consultant to determine what air pollution control technology was most appropriate for the new product line used in their solar-panel production. PSSI worked closely with the company ...


    By Pollution Systems

  • Reaching Euro VI emissions limits

    The requirements of low and lowest detectable exhaust analysis has prompted Eco Physics to launch a broad range of analyzers for NO/NOx detection. Emissions tuning is one of the targets of the EURO VI regulations as well as US EPA 2010, which are: Reduction of Particulate Matter (PM) and reduction of Nitrogen Oxides (NOx). In the past 15 years – since the first European regulation for exhaust ...


    By Eco Physics Inc.

  • Case study - Bakery ethanol

    Overview A bread and bun bakery was faced with installing air pollution control equipment to control the volatile organic compounds (VOCs) emitted during their baking process. The local regulatory agency requires bakeries that generate over 25 tons of ethanol per year to reduce emissions by 95% by installing control devices on their ovens. The airstream that needed to be treated included ...

  • A Modelling Approach to the Design Optimization of Catalytic Converters of IC Engines

    ABSTRACT In this paper, a modelling approach to the design optimization of catalytic converters is presented. The first step of the optimization is the model-assisted sizing of catalysts. For ...


    By DCL International Inc.

  • What`s the Best Air Pollution Control Technology for My Process?

    Air pollution control equipment is not something that business owners address by saying, “Let’s do the right thing for the environment and install an oxidizer!” In fact, the scenario is more likely to be “We need to increase productivity (always a good thing!), but that will put us over our annual emissions limits. Do we know what we will need? Where do we start? Who can ...

  • Understanding Air Pollution Control System Design Specifications

    As the full effect of the Federal Clean Air Act (CAA) Amendments continue to impact today’s industry, many different companies will be required to install new or additional air pollution control equipment.  With well over twenty-five years of proven success in a variety of industries, thermal and catalytic oxidation has become a popular method for controlling volatile organic compound (VOC) ...


    By The CMM Group, LLC

  • Automotive parts coater exceeds local air quality requirements - Case Study

    Today many companies are faced with unique air pollution control problems arising from their coating operations. Not only are vented emissions required to be controlled, but now a more pressing issue is how to treat fugitive emissions. Fugitive emissions are the VOC and HAP releases that occur at the coating process or in a mixing area. Fugitive emissions are sometimes difficult to capture when ...

  • Identifying Your Ideal Air Pollution Control Technology, Scenario 3

    In our recent blog, "What's the Best Air Pollution Control Technology for My Process?",  we examined the many factors that can impact a facility's choice of air pollution control equipment. When they are ...

  • Air Pollution Control Specs

    As the full effect of the federal Clean Air Act (CAA) Amendments continue to impact today’s industry, many companies will be required to install new or additional air pollution control equipment.  With more than 25 years of proven success in a variety of industries, catalytic and thermal oxidation has become a popular method for controlling volatile organic compound (VOC) and hazardous air ...


    By The CMM Group, LLC

  • Small project PSD cautions

    Following U.S. EPA’s promulgation of the PSD and Title V GHG Tailoring Rule, electric utilities, facilities with large industrial boilers, and other heavy industry manufacturing operations should be aware that the Prevention of Significant Deterioration (PSD) significance threshold for greenhouse gases (GHGs) may be the most stringent PSD triggering threshold for certain projects. Even ...


    By Trinity Consultants

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you