three-way catalyst Equipment available in Uganda

Available in Uganda| Near Uganda
20 Results found

We couldn't find any three-way catalyst equipment in Uganda

Here is a list of results available in Uganda

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Air & Climate ×

  • Subcategory: Catalysts ×

  • Keyword: three-way catalyst ×

  • Available in: Africa ×

  • Available in: Uganda ×

ADCAT - NSCR (three-way) Catalysts

by EmeraChem     based in Knoxville, TENNESSEE (USA)

NSCR (three-way) catalysts destroy nitrogen oxides (NOx), carbon monoxide (CO), and volatile organic compounds (VOC’s including formaldehyde) from the exhaust of rich-burn reciprocating engines used in gas compression and power generation.  Most rich-burn reciprocating engines are fueled by natural gas.  EmeraChem also offers ...

Three-Way Catalyst

by Caterpillar     based in Peoria, ILLINOIS (USA)

A flow through substrate coated with a high performance catalyst and housed within a stainless steel canister. Optional silencing available. Applicable to rich burn gas engines. A flow-through honeycomb substrate coated with a high performance catalyst and housed within a stainless steel canister. Optional silencing available. Applicable to rich ...

CRI - Vinyl Acetate Monomer (VAM) Catalysts

by CRI Catalyst Company (CRICC)     based in Houston, TEXAS (USA)

CRI’s VAM catalysts are designed to meet two important performance characteristics:  stability and activity. These catalysts have maintained commercial performance with life cycles greater than three years even at very high space time yields (STY’s) of 850 or greater. CRI has a VAM catalyst to achieve your high activity ...

Sulfur Recovery Catalyst

by Pingxiang Baisheng Chemical Packing Co., Ltd     based in Pingxiang, CHINA

PSR Sulfur Recovery Catalyst is used to treat with the acid gases containing H2S for the sake of recovery sulfur element and environmental protection in oil refinery, chemical factory, Iron & steel plant and natural gas treatment processes. The conversion of sulfur can reach to 65~75% in a ordinary bumer, for two stages Clause processes can ...

Nett - Model BlueCAT 200 - 3-Way Catalytic Converter

by Nett Technologies Inc     based in Mississauga, ONTARIO (CANADA)

The Nett BlueCAT™ 200 emission control system is verified by the California Air Resources Board for retrofit on propane fueled Large Spark Ignition (LSI) engines. These engines are typically used in forklifts, floor care machinery, aerial lifts, ground support equipment, and other industrial applications under the LSI-2 rule at 1.5 g/bhp-hr ...

MIRATECH - 3-Way Catalyst NSCR

by MIRATECH Corporation     based in Tulsa, OKLAHOMA (USA)

MIRATECH’s 3-Way Catalyst is the most advanced and cost-effective all-in-one Non-Selective Catalytic Reduction solution available. It is designed to provide a reliable, cost-effective total solution emissions control in rich-burn industrial engines.

Nett - Model T-Series - 3-Way Catalytic Converters

by Nett Technologies Inc     based in Mississauga, ONTARIO (CANADA)

Nett T-Series 3-Way catalytic converters and catalytic mufflers have been designed to control exhaust emissions and noise from industrial forklift trucks as well as other spark ignited rich-burn (stoichiometric) engines used in the material handling, construction or other industries. 3-Way catalytic converters/mufflers practically eliminate all of ...

Johnson Matthey - 3-Way (NSCR) Catalysts

by Johnson Matthey Emission Control Technologies     based in Royston, UNITED KINGDOM

Three-way catalysts (sometimes known as non-selective catalytic reduction, or NSCR, catalysts) are designed to simultaneously convert three pollutants to harmless emissions: Carbon Monoxide (CO) → Carbon Dioxide (CO2), Hydrocarbons (HC) → Water (H20), Oxides of Nitrogen (NOx) → Nitrogen (N2).

Johnson Matthey - 2-way (Oxidation) Catalysts

by Johnson Matthey Emission Control Technologies     based in Royston, UNITED KINGDOM

In most gas streams, carbon monoxide (CO) and hydrocarbons (HC) can be removed by combination with oxygen (O2) using an oxidation catalyst (also known as a 2-way catalyst): CO + ½ O2 → CO2, [HC] + O2 → CO2 + H2O. This reaction is suitable for oxygen-rich (“lean”) gas streams, typical of diesel exhaust and many ...

ADCAT - 3-Way NSCR & CO Oxidation Catalyst

by EAS, Inc.     based in Gladstone, MICHIGAN (USA)

Ensures maximum durability & extreme module mechanical integrity. Yields lowest possible pressure drop with high surface area. Resists plugging of inner-catalyst channels & substrate nesting which can cause exhaust bypass & poor catalyst performance. Contruction technique resists gaps & sags We manufacture all shapes & size ...

Catalyst Replacements & Spares

by EAS, Inc.     based in Gladstone, MICHIGAN (USA)

EAS Incorporated supplies new replacement ceramic corderite and honeycomb monolith metallic substrate VOC, CO, 3-Way NSCR, and bead type precious metal catalysts. We also offer manganese dioxide non precious metal catalysts. Our catalysts are available in a wide variety of cell densities ranging from 64-400 cpsi in ceramic corderite honeycomb ...

PSR Sulfur Recovery Catalyst

by pingxiang huihua ceramic packing(filling) co.,ltd     based in Pingxiang, CHINA

PSR Sulfur recovery Catalyst is used to treat with the acid gases containing H2S for the sake of recovery sulfur element and environmental protection in oil refinery, chemical factory, Iron & steel plant and natural gas treatment processes. The conversion of sulfur can reach to 65~75% in a ordinary bumer, 92~95% it react by two stages Clause ...

Diesel Oxidation Catalysts (DOC) ) Made of Mantel

by Standard Teco Limited     based in Guangxi Prov., CHINA

The motocycle catalytic converter is coated with rare earth element and noble metals of Pt,Pd,Rh.When the engine exhaust passing through the three-way catalytic converter the elements of CO would be oxidized into CO2,the HC is turned into H2O and CO2,while the NOX is deoxidized into nitrogen.The catalytic converter substrate is made of metal ...

GE - Selective Catalytic Reduction (SCR) for CHP Plants

by Clarke Energy     based in Liverpool, UNITED KINGDOM

Along with the supply of a GE Jenbacher cogeneration plant,  Clarke Energy can provide exhaust gas catalysts for the scrubbing of exhaust gases. Exhaust gas purification systems are able to reduce harmful exhaust gases by up to 95%. The exhaust gas purification system can consists of up to three consecutive stages, depending on the ...

Standard Motorcycle Exhaust System

by Standard Teco Limited     based in Guangxi Prov., CHINA

Passing through the strict test of endurance, our motorcycle catalytic converter has met European emission standard, and the economical loss of motorcycle's power could be less than 3%. We could customize the products according to clients' different requirement. Our catalyst is a compound catalyst with rare earth element and noble ...

Synergy - Automotive Aftermarket Catalytic Converter

by Synergy Catalyst     based in Dallas, TEXAS (USA)

High Performance: Superior Manufacturing. Synergy uses only high performance, ultra-low back pressure metallic substrates as supports for our state of the art aftermarket catalysts

Puremet

by Mantec Technical Ceramics     based in Longton, Stoke on Trent, UNITED KINGDOM

Puremet is a unique ceramic formed as a reticulated irregular, three dimensional, open cell structure with a high average surface area. It is ideal as a catalyst, bio-mass support medium, or metal pour filter for the casting industry.

The SCRT System

by Johnson Matthey Emission Control Technologies     based in Royston, UNITED KINGDOM

The SCRT system is more than simply a combination of a CRT system and an SCR system. In this integrated design, the CRT performs two functions: it gives excellent conversion of CO, HC and PM, and it enhances the NO2 content of the gasses that pass into the SCR system. By optimising the gas mix supplied to the SCR catalysts in this way, excellent ...

Vortex - Model DHS100 - Catalytic Converter Cutter

by Vortex De-Pollution     based in Denver, COLORADO (USA)

The hydraulic cutter is used to easily snip off the vehicles catalytic converter without destroying the valuable catalyst inside. The cutters work from a hydraulic power pack which is powered by either air, electric motor or petrol engine. This produces a 700bar (10,000lbs/psi) hydraulic output. This power turns into a 28.1 tonne cutting force, ...

Need help finding the right suppliers?

Let the XPRTs do the work for you