Catalytic Air Pollution Control Equipment For Air And Climate Available In Israel
-
ShowcaseManufactured by Anguil Environmental Systems, Inc.based in USA
The Anguil Emission Concentrator is an adsorption system designed to concentrate large volume, low concentration process exhaust into a much smaller, higher concentrated air stream. The greatly reduced flow with higher Volatile Organic Compound (VOC) concentration is sent to a thermal or catalytic oxidizer for VOC destruction. The destruction device can then be much smaller in size, significantly ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
The Anguil Catalytic Recuperative Oxidizer destroys Hazardous Air Pollutants (HAPs), Volatile Organic Compounds (VOCs) and odorous emissions at significantly lower temperatures than thermal oxidation technologies through the use of ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
Widely considered to be the most energy-efficient oxidizer, Anguil's Regenerative Thermal Oxidizer (RTO) uses ceramic media to recover upwards of 97% of the available energy. What makes our RTO so popular is its ability to repurpose the thermal energy generated during operation to reduce operating costs and energy consumption of the system itself. The regenerative component makes it capable of ...
-
PremiumManufactured by ECO Physics AGbased in SWITZERLAND
The nCLD 844 CMhr analyzer is the next generation in high precision nitrogen oxide measurement. Unique in speed and reliability, the nCLD 844 CMhr is modular designed and capable of simultaneously measuring NO, NO2, NOx, NH3 and NOx-amines from hot and humid gas sources without additional cooler. It features a dual inlet option for assessing two different sources at once. The new and intuitive ...
-
PremiumManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
Continuous Mercury Monitoring systems CMM AutoQAL and CMM systems are the perfect solutions for monitoring mercury continuously from hot, wet and corrosive gas streams. These future-proof systems have the lowest certified range in the world (0-5 µg/m3) and CMM AutoQAL has an automatic and integrated QAL3 validation ...
-
PremiumManufactured by Shanghai Metash Instruments Co.,Ltd.based in CHINA
Features: Imported NDIR detector, guaranteeing higher sensitivity and stability. 680? catalytic oxidation technology with Platinum catalyst, especially for seawater test. Optional 20-position autosampler saves 80% time and energy. Modular design, simplifying device operation and maintenance. Multi-functional PC software. High-performance processor,ensuring stable and reliable system running. PID ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The Model VE 222 is an efficient, all heated and low pressure drop 2-stream sample sequencer, filter and interface for removing solids from two gaseous sample streams. The Model VE 222 utilizes two independent permanently installed all stainless steel mesh sample filters and two independent all stainless steel sample valves in a thermostatic controlled oven to prevent the loss of high molecular ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
Anguil provides a broad line of technologically advanced, yet user-friendly air pollution control products for the abatement of industrial emissions like Volatile Organic Compounds (VOCs), Hazardous Air Pollutants (HAPs), Nitrogen Oxides (NOX) and process odors. Each thermal and catalytic oxidizer product represents a value-engineered system with emphasis on cost minimization for vapor combustion ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The J.U.M OVF-3000 Portable Heated Total Hydrocarbon Analyzer is a light weight, over the shoulder portable heated FID analyzer to continuously measure the total concentration of hydrocarbons within a gaseous sample. This can be ambient air, exhaust gases from a combustion process e.g. stack emissions, from any type of an industrial vent, from an internal combustion engine, or from any other ...
-
PremiumManufactured by Umwelttechnik MCZ GmbHbased in GERMANY
The catalytic gas purifier also removes hydrocarbons and CO from the treated zero gas. This gas free of HC and CO is suitable as process and carrier gas for gas chromatographs and to produce calibration gas for CO/HC ...
-
PremiumManufactured by Hangzhou Zetian Technologybased in CHINA
DPF/SCR &ASC/DOC System Stationary Source ...
-
PremiumManufactured by ENVEAbased in FRANCE
Heated Turnkey Gas Analysis System ideally suited for fast, continuous and simultaneous measurements of NH3 and NOx in DeNOx applications (SCR and SNCR). In DeNOx systems using urea injection with ammonia (NH3) as a reducing agent, the flow rate and control of NH3 must be continuously adjusted and controlled to prevent excess NH3 emissions (slip), to reduce environmental impact and cost of ...
-
PremiumManufactured by Maschinenfabrik Gustav Eirich GmbH & Co KGbased in GERMANY
Our granulating and pelletizing mixers perform mixing and granulating/pelletizing in a single machine. Eirich has comprehensive know-how in granulating and pelletizing ...
-
PremiumManufactured by Synspec BVbased in NETHERLANDS
Monitoring of Sulfur Compounds in the Ambient Air. Synspec GC 955 810 gas chromatograph is specifically designed and built for the measurement of sulfur compounds in the ambient air. The two prominent groups of sulfur compounds that can be detected with this GC are mercaptans and sulfides but additional components such as benzene can be added also. The instrument is equipped with a built-in ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The J.U.M Heated Total Hydrocarbon Analyzer Model 3-700 FID is designed to be installed directly upstream of a FTIR analyzer (e.g. Gasmet) to continuously measure the total concentration of hydrocarbons within a gaseous sample. All controls which allow to calibrate the FTIR or FID individually are built in. Sources can be ambient air, exhaust gases from a combustion process e.g. stack emissions, ...
-
PremiumManufactured by Granutech-Saturn Systemsbased in USA
Non-Ferrous Processing and Separation Application. Non-Ferrous Metal Recycling is a large industry focusing on the recovery of metals such as aluminum, brass, copper, and even precious metals from electronic scrap. The applications and needs of non ferrous metal recyclers vary greatly. These can include a large corporate recycler buying UBC bales for shredding to be converted back into beverage ...
-
PremiumManufactured by Jacobi Groupbased in SWEDEN
Activated carbons designed for air and gas treatment, covering a diverse set of applications including VOC abatement in air, odour control, solvent recovery, process gas purification, residential and commercial air treatment devices, cigarette filters, and cabin air filters and evaporative loss devices in automobiles. ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
J.U.M.'s External Non Methane Hydrocarbon Cutter allows the added capability to measure alternately METHANE ONLY or THC with one heated total hydrocarbon analyzer ...
-
PremiumManufactured by ECO Physics AGbased in SWITZERLAND
The photolytic converter PLC 860 is capable of selectively converting NO2 concentrations of a few ppt. The PLC 860 is the right choice for NO2 measurements in areas with excellent air ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
Anguil’s thermal and catalytic oxidizer technologies are capable of destroying halogenated organic acids and mixed organic vapor contaminants that are discharged from a variety of industrial process streams. We have also developed several destruction devices specifically for soil and groundwater remediation sites contaminated with chlorinated compounds such as carbon tetrachloride, ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you