Catalytic Air Pollution Control Equipment For Air And Climate Available In Missouri
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
Anguil provides a broad line of technologically advanced, yet user-friendly air pollution control products for the abatement of industrial emissions like Volatile Organic Compounds (VOCs), Hazardous Air Pollutants (HAPs), Nitrogen Oxides (NOX) and process odors. Each thermal and catalytic oxidizer product represents a value-engineered system with emphasis on cost minimization for vapor combustion ...
-
PremiumManufactured by ENVEAbased in FRANCE
Heated Turnkey Gas Analysis System ideally suited for fast, continuous and simultaneous measurements of NH3 and NOx in DeNOx applications (SCR and SNCR). In DeNOx systems using urea injection with ammonia (NH3) as a reducing agent, the flow rate and control of NH3 must be continuously adjusted and controlled to prevent excess NH3 emissions (slip), to reduce environmental impact and cost of ...
-
PremiumManufactured by Enviro Solutions Technology Co.,Ltdbased in CHINA
Ammonia is a gas that easily dissolves into water, there are several common detection methods,but ammonia is toxic and corrosive, the current measurement mainly uses the TDLAS direct measurement method. TDLAS is essentially a spectral absorption analysis technology, which uses the selective absorption characteristics of gas molecules for specific wavelength lasers, and analyzes the changes in the ...
-
PremiumManufactured by Umwelttechnik MCZ GmbHbased in GERMANY
The catalytic gas purifier also removes hydrocarbons and CO from the treated zero gas. This gas free of HC and CO is suitable as process and carrier gas for gas chromatographs and to produce calibration gas for CO/HC ...
-
PremiumManufactured by ENVEAbased in FRANCE
One of the sole QAL 1 certified FID analyzers on the market, also available in a transportable version for the measurement of: THC or simultaneous THC, nmHC & ...
-
PremiumManufactured by Simple Solutions Distributing LLCbased in USA
Catalytic carbons are the newest class of activated carbons for odor control. These carbons also exhibit an enhanced capacity for H2S, but achieve this increased capacity differently than do caustically impregnated or blended carbons. Catalytic carbons convert adsorbed H2S into sulfuric acid and sulfurous acid, which is stored more efficiently on carbon than is H2S (but not as efficiently as ...
-
PremiumManufactured by Umwelttechnik MCZ GmbHbased in GERMANY
Compressed air system with compressor and filter. Oil-free dental compressor. For process gas, lab or dental gas or zero gas system for gas analysis. Modular system for stationary installation. Optionally with catalytic gas purifier and ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
Widely considered to be the most energy-efficient oxidizer, Anguil's Regenerative Thermal Oxidizer (RTO) uses ceramic media to recover upwards of 97% of the available energy. What makes our RTO so popular is its ability to repurpose the thermal energy generated during operation to reduce operating costs and energy consumption of the system itself. The regenerative component makes it capable of ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The J.U.M OVF-3000 Portable Heated Total Hydrocarbon Analyzer is a light weight, over the shoulder portable heated FID analyzer to continuously measure the total concentration of hydrocarbons within a gaseous sample. This can be ambient air, exhaust gases from a combustion process e.g. stack emissions, from any type of an industrial vent, from an internal combustion engine, or from any other ...
-
PremiumManufactured by Jacobi Groupbased in SWEDEN
Activated carbons designed for air and gas treatment, covering a diverse set of applications including VOC abatement in air, odour control, solvent recovery, process gas purification, residential and commercial air treatment devices, cigarette filters, and cabin air filters and evaporative loss devices in automobiles. ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The J.U.M Heated Total Hydrocarbon Analyzer Model 3-500 FID is our lowest cost alternative to continuously measure the total concentration of hydrocarbons within a gaseous sample. This can be ambient air, exhaust gases from a combustion process e.g. stack emissions, from any type of an industrial vent, from an internal combustion engine, or from any other emission containing hydrocarbons. The ...
-
PremiumManufactured by Synspec BVbased in NETHERLANDS
Monitoring of Sulfur Compounds in the Ambient Air. Synspec GC 955 810 gas chromatograph is specifically designed and built for the measurement of sulfur compounds in the ambient air. The two prominent groups of sulfur compounds that can be detected with this GC are mercaptans and sulfides but additional components such as benzene can be added also. The instrument is equipped with a built-in ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
As a connection-ready thyristor switch with secure operational behavior and load monitoring, the Thyro-S (SCR) power controller switches electric loads, for example, current, voltage, or power. It can be connected to bus systems, used instand-alone operation, or used in combination with all established 2-point process controllers, PLCs, or computer systems. With simple mounting, quick ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The J.U.M W600 Heated Total Hydrocarbon Analyzer is a very compact wall or panel mount heated FID analyzer to continuously measure the total concentration of hydrocarbons within a gaseous sample. This can be ambient air, exhaust gases from a combustion process e.g. stack emissions, from any type of an industrial vent, from an internal combustion engine, or from any other emission containing ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
When catalyst is added to the media chambers of an RTO it is then referred to as an RCO. The abatement device still relies on high energy recovery to minimize auxiliary energy usage. However, the VOC compounds will oxidize at lower temperatures with the use of catalyst, further lowering the need for auxiliary energy. This is a great option for catalyst friendly compounds. Multiple catalyst and ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
The Anguil Self-Cleaning Ceramic Filter (SCCF) collects, volatilizes and destroys particulate and condensable organics emitted from industrial process streams. It can be used independently as a filter media on hot and cold process streams or coupled with an oxidation module for total odor, Volatile Organic Compound (VOC) and Hazardous Air Pollutant (HAP) ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The Model VE 222 is an efficient, all heated and low pressure drop 2-stream sample sequencer, filter and interface for removing solids from two gaseous sample streams. The Model VE 222 utilizes two independent permanently installed all stainless steel mesh sample filters and two independent all stainless steel sample valves in a thermostatic controlled oven to prevent the loss of high molecular ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The J.U.M Heated Total Hydrocarbon Analyzer Model 3-600 FID is another low cost alternative to continuously measure the total concentration of hydrocarbons within a gaseous sample. This can be ambient air, exhaust gases from a combustion process e.g. stack emissions, from any type of an industrial vent, from an internal combustion engine, or from any other emission containing hydrocarbons. The ...
-
PremiumManufactured by ECO Physics AGbased in SWITZERLAND
The nCLD 844 CMhr analyzer is the next generation in high precision nitrogen oxide measurement. Unique in speed and reliability, the nCLD 844 CMhr is modular designed and capable of simultaneously measuring NO, NO2, NOx, NH3 and NOx-amines from hot and humid gas sources without additional cooler. It features a dual inlet option for assessing two different sources at once. The new and intuitive ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The J.U.M. Engineering HFID Model 5-100 is a compact 19" rack mount or table top heated total hydrocarbon analyzer for high accuracy, sensitivity and stability for pressurized samples with conventional sample back pressure ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you