Catalytic Oxidizers Equipment For Air And Climate In Ohio
-
Manufactured by Fives I.T.A.S. s.p.a.based in ITALY
The heat regenerative and catalytic oxidizers distinguish themselves from the heat regenerating technology, as the ceramic mass inside the reactors contains the catalysts and therefore the auto-thermal is obtained with low concentrations (0.7 to 1.5 g/Nm3). The use of ceramic masses containing the catalysts allows existing Regenerative type plants to be transformed into Catalytic ones with the ...
-
Manufactured by TKS Industrial Companybased in USA
The most basic type of thermal oxidizer is a direct-fired, also known as an afterburner. As the simplest type of thermal oxidizer, it does not include any heat recovery, heat exchanger, scrubber, adsorbent, or catalyst material. It offers the lowest upfront capital investment cost, but is thermally inefficient, so it requires the most energy to operate. Other thermal oxidizer designs implement a ...
-
Manufactured by Dürr Systems, Inc.based in USA
By introducing a catalyst, thermal oxidation occurs at lower temperatures in the range between 450 and 600°C. This reduces the required energy. For small applications an electric heater can be used in the OxiTHERM™Cat oxidiser system instead of a ...
-
Manufactured by Dürr Systems, Inc.based in USA
The purpose of low-pressure catalytic systems is to remove volatile organic compounds (VOCs) using catalytic oxidation. Low-pressure catalytic systems are suitable for all catalytic applications. The pollutants are converted at atmospheric pressure or at a slight overpressure or ...
-
Manufactured by CTP America Inc.based in USA
The AutoKAT combines the advantages of regenerative thermal oxidation with those of catalytic oxidation and is a technologically advanced air pollution solution. The AutoKAT is a very cost-effective alternative if no catalyst poisons occur. Existing systems can be upgraded to an ...
-
based in AUSTRIA
The AutoKAT combines the advantages of regenerative thermal oxidation with those of catalytic oxidation. The AutoKAT is a very cost-effective alternative for well understood waste streams. Existing RTO systems can be upgraded to an ...
-
Manufactured by Knight Material Technologiesbased in USA
We are a market leader in structured media with geometrically arranged corrugated sheets offering improved operation over saddle random media. Our proprietary media designs provide greater resistance to fouling than random or monolithic ...
-
Manufactured by Overhoff Technology Corporationbased in USA
Model 593 is sensitive only to tritium. A semipermeable membrane is used to isolate tritium oxide for passage into the instrument measuring system. All other sample constituents, including pollutants, radioisotopes, aerosols or particulates are removed and eliminated from the ...
-
Manufactured by Dürr Systems, Inc.based in USA
RCO (regenerative catalytic oxidizer) systems combine the advantages of regenerative heat exchangers with those of catalytic oxidation. They are used to reduce pollutant levels in exhaust air that is not heavily contaminated and to minimize ...
-
Manufactured by Stelter & Brinck, Ltdbased in USA
Stelter & BrinckCatalytic Oxidizersare a type of air pollution control system used in HAP or VOC laden air streams that are free of catalyst fouling agents or poisons. Typical industries include: aluminium and steel, bakeries & food processing, textile finishing, plastics & polymer, wastewater treatment, wood-fired boilers and many more! Our catalytic oxidization systems are complete ...
-
Manufactured by Fives I.T.A.S. s.p.a.based in ITALY
The oxidizing reactions, that take place in thermal plants at temperature above 700 °C, may be obtained at lower temperatures by means of a catalytic bed consisting of metal oxides or salts of precious ...
-
Manufactured by CTP America Inc.based in USA
For high cleaning efficiency, the RecuKAT's attractive economic performance is due to the low reaction temperature of the CTP oxidation catalysts. CTP can refer to 25 years of experience with catalysts in industrial applications. The RecuKAT as an air cleaning system is suitable for small to medium gas flows with high ...
-
based in AUSTRIA
For high cleaning efficiency, the RecuKAT's attractive economic performance is due to the low reaction temperature of the CTP catalysts. CTP can refer to more than 30 years of experience with catalysts in industrial applications. The RecuKAT is suitable for small to medium gas flows with low or high ...
-
Manufactured by FAST-ACTbased in USA
FAST-ACT safely contains or neutralizes acids, bases, and other chemical hazards – without identi¬cation – in a single response ...
-
Manufactured by RAE Systems - a Honeywell Companybased in USA
Compact, reliable and easy-to-use, the ToxiRAE Pro doesn’t get in the way of workers doing their job and provides unmistakable five-way local and remote alarms if a threat is detected or a man is down. Plus, it offers the flexibility of easily swappable sensors to monitor for different gases in different situations. This personal, wireless monitor for toxic gases and oxygen keeps workers ...
-
Manufactured by Servomex - a Spectris Companybased in USA
High-performance analysis of total hydrocarbons (THC), methane (CH4) and non-methane hydrocarbons (NMHC). The SERVOPRO HFID heated total hydrocarbon analyzer utilizes a highly sensitive Flame Ionization Detector (FID) for measuring volatile hydrocarbon concentrations in vehicle/engine certification testing and industrial gas stack emissions monitoring applications. This ensures real-time, ...
-
Manufactured by Hungerford & Terry Inc.based in USA
H&T developed and patented the continuous regeneration process for iron and manganese removal in 1963. This process used a feed of chlorine and potassium permanganate upstream of a manganese greensand filter to keep the catalytic manganese dioxide coating of the manganese greensand media regenerated. Our method became the industry standard for the next 40 years. In 2005, H&T introduced ...
-
Manufactured by Hungerford & Terry Inc.based in USA
The Hungerford & Terry Permanganate Color Monitor Plus provides for the continuous monitoring of water treatment plant effluents that use potassium permanganate in the treatment system, such as the H&T GreensandPlus CR (continuous regeneration) process. The color monitor continuously views a sample taken as a sidestream from the plant or filter effluent. Spectroscopic quality optical ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you