Catalytic Reduction Equipment For Air And Climate Available In Congo, Democratic Republic Of The
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
The Anguil Catalytic Recuperative Oxidizer destroys Hazardous Air Pollutants (HAPs), Volatile Organic Compounds (VOCs) and odorous emissions at significantly lower temperatures than thermal oxidation technologies through the use of ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
DPF/SCR &ASC/DOC System Stationary Source ...
-
PremiumManufactured by Enviro Solutions Technology Co.,Ltdbased in CHINA
Ammonia is a gas that easily dissolves into water, there are several common detection methods,but ammonia is toxic and corrosive, the current measurement mainly uses the TDLAS direct measurement method. TDLAS is essentially a spectral absorption analysis technology, which uses the selective absorption characteristics of gas molecules for specific wavelength lasers, and analyzes the changes in the ...
-
PremiumManufactured by Lindner-Recyclingtech GmbHbased in AUSTRIA
Powerful, Compact and Versatile: Flexible, powerful, economical. Our Urraco 75 gives you all the advantages of mobile shredding while being extremely compact. This all-rounder shreds even difficult materials with its robust design and powerful engine. Depending on the degree of mobility needed, the machine is available in two chassis versions: either with a wheel axle and tow bar, suitable for ...
-
PremiumManufactured by Lindner-Recyclingtech GmbHbased in AUSTRIA
The new Urraco 4000 models tick all the boxes: tried-and-tested quality paired with maximum availability and continuously high output. The Urraco 4000 series, Lindner’s new mobile shredder generation, leaves nothing to be desired in terms of mobility and the excellent accessibility to the maintenance points and the drive. The result: shorter downtimes, improved productivity and consistently ...
-
PremiumManufactured by ENVEAbased in FRANCE
Rack 3U monitor using the TDL extractive technology to measure online the NH3 pre and/or post catalyst: SCR (Selective Catalytic Reduction) or SNCR (Selective Non-Catalytic Reduction) ENVEA is offering Laser Gas Detection (LGD) modules with exceptional advantages and value for the customer. Tunable Diode Laser Spectrometry (TDLS), enhanced by proprietary technology, is used for the measurement of ...
-
Distributed by Nationwide Boiler Inc.based in USA
With emission limits continuing on a downward trend, the Nationwide Boiler CataStak SCR System is the choice for ultra low NOx emissions compliance. After years of field testing on numerous rental projects, selective catalytic reduction was recognized as the one solution that met all of Nationwide Boiler's objectives: It was economical, reliable, easy-to-operate, efficient and reduced emissions ...
-
Manufactured by Britannia Petroleum Limitedbased in UNITED KINGDOM
Over the past 28 years, Britannia has built a reputation on its ability to provide reliable SCR Systems and equipment to the Drilling Industry all over the world. Today Britannia has the technical expertise and manufacturing facilities in the UK to build complete turnkey SCR packages for drilling ...
-
Manufactured by Epcon Industrial Systems, LPbased in USA
Flue Gas Recirculation (FGR) acts to reduce NOx formation by reducing peak flames temperatures. In conventional applications, the recirculated flue gas is typically extracted from the boiler outlet duct upstream of the air heater. The flue gas is then returned through a separate duct and hot gas fan to the combustion air duct that feeds the wind box. The recirculated flue gas is mixed with the ...
-
Manufactured by Cubic Sensor and Instrument Co., Ltdbased in CHINA
The wide band oxygen sensor LSU is a planar ZrO2 dual cell limiting current sensor with an integrated heater. It is used to measure the oxygen content and the λ-value of exhaust gases in automotive engines (gasoline and diesel). Its monotonic output signal in the range of λ=0.65 to air makes the LSU capable of being used as an universal sensor for λ=1 measurement as well as for other λ ranges. ...
-
Manufactured by Pingxiang Naike Chemical Packing Co.,Ltdbased in CHINA
Porous ceramic ball has high stability and flexibility. and improves the void of the specific surface area and lowing resistance. It is a new developed product in our company, and we focus on the centre of the ball to open holes, it has high stability and flexibility. and improves the void of the specific surface area, lowing the resistance of the system..So it can be widely used in oiling, ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Along with the supply of a GE Jenbacher cogeneration plant, Clarke Energy can provide exhaust gas catalysts for the scrubbing of exhaust gases. Exhaust gas purification systems are able to reduce harmful exhaust gases by up to 95%. The exhaust gas purification system can consists of up to three consecutive stages, depending on the requirements of the application, to purify the exhaust gases: The ...
-
Manufactured by EES - Environmental Energy Servicesbased in USA
STEP Combustion also designs, engineers, and provides Selective Catalytic Reduction (SCR) systems which provide the highest level of NOx reduction. As its name implies, the SCR uses a catalyst and injected reagent such as ammonia or urea to convert NOx to elemental nitrogen (N2. The reagent is injected upstream of catalyst housing and mixes with the flue gas. The SCR system NOx reduction can be ...
-
Manufactured by ERC Emissions-Reduzierungs-Concepte GmbHbased in GERMANY
In case of a selective catalytic reduction (SCR), ammonia reacts with the harmful nitrogen monoxide (NO) and nitrogen dioxide (NO2) from the flue gas into harmless nitrogen (N2) and water. The reaction temperature is 200 to 450 °C. In practice, urea-based ammonia-releasing reduction agents, such as the proven carbamin 5722 from ERC Technik, are the most suitable option available. SCR plants ...
-
Manufactured by Ceram Austria GmbHbased in AUSTRIA
Ceram Austria GmbH has been producing homogeneously extruded honeycomb catalysts since 1985. This catalyst product mainly consists of titanium oxide, tungsten oxide and vanadium pentoxide. The required mechanical strength is achieved by adding glass ...
-
Manufactured by ERC Emissions-Reduzierungs-Concepte GmbHbased in GERMANY
In case of selective non-catalytic reduction (SNCR), ammonia reacts with the harmful nitrogen monoxide (NO) and nitrogen dioxide (NO2) from the flue gas into harmless nitrogen (N2) and water. The reaction temperature is 850 to 1,100 °C. In practice, urea-based ammonia-releasing reduction agents, such as the proven carbamin 5722 from ERC Technik, are the most suitable option available. The ...
-
Manufactured by Solvay - Soil Treatment Productsbased in BELGIUM
SOLVAir® SB 0/3 is a sodium-bicarbonate-based formulation for flue gas treatment. It is particularly recommended to revamp plants equipped with a lime milk semi-wet or a dry lime injection based flue gas treatment with a bag filter and a DeNOX selective catalytic reduction system. As a ready-to-use sorbent, SOLVAir® SB 0/3 is known for its easy handling, efficiency and environmental ...
-
Manufactured by Cubic Sensor and Instrument Co., Ltdbased in CHINA
The automotive oxygen sensor is used to measure the oxygen content in automobile exhaust, and convert the oxygen content into an electrical signal that is transmitted to the ECU, this allows the engine to achieve the target excess air factor (λ= 1) in a closed-loop; Ensure maximum conversion efficiency for hydrocarbons (HC), carbon monoxide (CO) and nitrogen oxides (NOx) in the exhaust, ...
-
Manufactured by Marsulex Environmental Technologies (MET)based in USA
MET is aligned with Termokimik Corporation (TKC), a leading Italian engineering and contracting company, to provide TKC's proven Selective Catalytic reduction (SCR) technology and worldwide experience exclusively to the North American market. TKC's demonstrated SCR technology, which has a solid installation base around the world, including 4,000 megawatts in the United States, reduces more than ...
-
Manufactured by CHEEMA BOILERS LIMITEDbased in INDIA
CBL is a leading player in air quality control systems (AQCS) through selective catalytic reduction (SCR), electrostatic precipitator (ESP), and flue gas desulfurization (FGD) technologies. We provide comprehensive means for purifying exhaust gas emissions from various sources. Our technologies lend new-found quality and security to several vital industries, and we work continuously to improve ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you